Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = 2.75 m/s²s = 1200 m

A plane starts from rest and accelerates uniformly at 2.75 m/s² along a runway. Find its speed v after 1200 m.

v₀ = 0a = 2.75 m/s²s = 1200 m
v = m/s
2.KinematicsHard
v₀ = 8 m/s15 m

A ball is thrown straight up at 8 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 8 m/sh₀ = 15 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 20°25 kgF = ?

A 25 kg box is pushed up a ramp at 20° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the pushing force F.

m = 25 kgθ = 20°μ = 0.3g = 9.81 m/s²
F = N
4.Newton’s lawsHard
θ = 15°blockv₀ = 8 m/s

A block is given a push so that it starts sliding up a ramp at 15° with a speed of 8 m/s. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 8 m/sθ = 15°μ = 0.1g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 24 m/sθ = ?R = 20 m

A ball is launched from level ground at 24 m/s and must land 20 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 24 m/sR = 20 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 30 mv0​ = 22 m/s15°range

A ball is launched at 15° above horizontal from the top of a 30 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 22 m/sθ = 15°h = 30 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 130 mvmax​ = ?

A car takes a flat curve of radius 130 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 130 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.1 mv = 8.5 m/s

A 0.8 kg ball on a string 1.1 m long is swung in a vertical circle. At the lowest point it moves at 8.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 0.8 kgr = 1.1 mv = 8.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
0.1 kgk = 1000 N/mh = ?

A toy launcher has a vertical spring of stiffness 1000 N/m. A 0.1 kg ball is placed on it and the spring is compressed by 4 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.

m = 0.1 kgk = 1000 N/mx = 4 cmg = 9.81 m/s²
h = m
10.Work & energyHard
h = 2.5 mL = 3 mμ = 0.15k = 4000 N/m

A 0.5 kg block is released from rest at height 2.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3 m long (μ = 0.15) and then runs onto a spring (k = 4000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 0.5 kgh = 2.5 mL = 3 mμ = 0.15k = 4000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
5 kg49 m/s2 kgv′2​ = ?

A 7 kg projectile moving horizontally at 15 m/s explodes into two fragments that move along the same line. The 5 kg fragment continues forwards at 49 m/s. Find the velocity v′2 of the 2 kg fragment (positive in the original direction).

M = 7 kgu = 15 m/sm1 = 5 kgv′1 = 49 m/sm2 = 2 kg
v′2 = m/s
12.Momentum & collisionsHard
2 kgv = ?20 g30°L = 1.8 m

A 20 g bullet is fired horizontally into a 2 kg block hanging from light strings 1.8 m long, and stays in it. The strings swing out to a largest angle of 30° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 20 gM = 2 kgL = 1.8 mθ = 30°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
n = 1500 rpmTb​ = 10 N·mI = 5.5 kg·m²

A flywheel with a moment of inertia of 5.5 kg·m² spins at 1500 rpm. A brake applies a constant friction torque of 10 N·m. How long t does it take to stop?

I = 5.5 kg·m²n = 1500 rpmTb = 10 N·m
t = s
14.Rigid-body rotationHard
disc: 13 kgring: 3 kgn1​ = 650 rpm

A uniform solid disc (mass 13 kg, radius 0.5 m) spins freely at 650 rpm about a vertical frictionless shaft. A thin ring of mass 3 kg and the same radius is dropped onto it from rest, centred on the shaft, and the two quickly spin together. How much kinetic energy ΔE is lost in the process?

Mdisc = 13 kgMring = 3 kgR = 0.5 mn1 = 650 rpm
ΔE = J
15.Gears & gear trainsMedium
N1​ = 36N2​ = 80

A 4 kW motor running at 1500 rpm drives a pinion with 36 teeth, which meshes with a gear with 80 teeth. The gear pair has an efficiency of 97%. Find the torque T1 on the motor shaft.

P = 4 kWn1 = 1500 rpmN1 = 36N2 = 80η = 97%
T1 = N·m
16.Gears & gear trainsHard
A = 60B = 80C = 36D = 45

In a compound gear train, gear A (60 teeth) on the input shaft turning at 3000 rpm drives gear B (80 teeth). Gear C (36 teeth) is fixed to the same shaft as B and drives gear D (45 teeth) on the output shaft. Find the output speed nout.

nin = 3000 rpmA = 60B = 80C = 36D = 45
nout = rpm
17.Springs & pendulumsMedium
L = 2.4 m

A simple pendulum has a length of 2.4 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.4 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
mk = 80 N/mA = 9 cmx = 5 cm

A mass on a spring with k = 80 N/m oscillates on a frictionless surface with an amplitude of 9 cm. Find the energy U stored in the spring when the mass is 5 cm from equilibrium.

k = 80 N/mA = 9 cmx = 5 cm
U = J
19.Mechanical vibrationsMedium
k = 100 kN/mc = 240 N·s/mm = 15 kg

A 15 kg mass is supported by a spring with a stiffness of 100 kN/m and a viscous damper with a damping coefficient of 240 N·s/m. Find the damping ratio ζ.

m = 15 kgk = 100 kN/mc = 240 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 30k2​ = 5k3​ = 20m = 100 kg

A 100 kg mass hangs from spring k₃ = 20 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 30 kN/m and k₂ = 5 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 30 kN/mk2 = 5 kN/mk3 = 20 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: v = 81.24 m/s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Speed after the distance

v = √(2·a·s) = √(2·2.75·1200) = 81.24 m/s

Answer

v = 81.24 m/s
(292.5 km/h)
2.Kinematics

Answer: t = 2.745 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−15 = 8·t − ½·9.81·t²
4.905·t² − 8·t − 15 = 0

Solve the quadratic

Only the positive root is physical.

t = (8 + √(8² + 2·9.81·15))/9.81 = 2.745 s

Answer

t = 2.745 s
3.Newton’s laws

Answer: F = 153 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Constant speed: the forces balance.

F = m·g·sin θ + μ·m·g·cos θ

Pushing force

F = 83.88 + 69.14 = 153 N

Answer

F = 153 N
4.Newton’s laws

Answer: d = 9.178 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 15° + 0.1·cos 15°) = 3.487 m/s²

Distance

d = v₀²/(2a) = 8²/(2·3.487) = 9.178 m

Answer

d = 9.178 m
5.Projectile motion

Answer: θ = 9.957 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·20/24² = 0.3406

Angle

2θ = 19.91° → θ = 9.957°

Answer

θ = 9.957°

The other solution is 90° − θ = 80.04°.

6.Projectile motion

Answer: t = 3.121 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 22·cos 15° = 21.25 m/s
vy = v0·sin θ = 22·sin 15° = 5.694 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 30 + 5.694·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (5.694 + √(32.42 + 588.6))/9.81 = 3.121 s

Answer

t = 3.121 s
7.Circular motion

Answer: vmax = 27.66 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·130) = 27.66 m/s

Answer

vmax = 27.66 m/s (99.58 km/h)
8.Circular motion

Answer: T = 60.39 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 0.8·9.81 + 0.8·8.5²/1.1 = 7.848 + 52.55 = 60.39 N

Answer

T = 60.39 N
9.Work & energy

Answer: h = 0.8155 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 4 cm = 0.04 m
½kx² = ½·1000·0.04² = 0.8 J

Height

m·g = 0.1·9.81 = 0.981 N
h = ½kx²/(mg) = 0.8/0.981 = 0.8155 m

Answer

h = 0.8155 m
10.Work & energy

Answer: x = 7.091 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 4.905·(2.5 − 0.15·3) = 10.06 J

Maximum compression

½kx² = 10.06 → x = √(2·10.06/4000) = 0.07091 m = 7.091 cm

Answer

x = 7.091 cm
11.Momentum & collisions

Answer: v′2 = −70 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 7·15 = 105 kg·m/s

Momentum after

105 = 5·49 + 2·v′2
v′2 = (105 − 245)/2 = −70 m/s

Answer

v′2 = −70 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: v = 219.7 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.8·(1 − cos 30°) = 0.2412 m

Speed after impact

V = √(2·9.81·0.2412) = 2.175 m/s

Collision

v = (m + M)·V/m = 2.02·2.175/0.02 = 219.7 m/s

Answer

v = 219.7 m/s
13.Rigid-body rotation

Answer: t = 86.39 s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1500/60 = 157.1 rad/s

Deceleration and time

α = Tb/I = 10/5.5 = 1.818 rad/s²
t = ω/α = 157.1/1.818 = 86.39 s

Answer

t = 86.39 s
14.Rigid-body rotation

Answer: ΔE = 1189 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = ½·13·0.5² = 1.625 kg·m²
I2 = 3·0.5² = 0.75 kg·m²

Conservation of angular momentum

n2 = n1·I1/(I1 + I2) = 650·1.625/2.375 = 444.7 rpm

Kinetic energy before and after

E1 = ½·1.625·68.07² = 3765 J
E2 = ½·2.375·46.57² = 2576 J
ΔE = 3765 − 2576 = 1189 J

Answer

ΔE = 1189 J
15.Gears & gear trains

Answer: T1 = 25.46 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 4000/157.1 = 25.46 N·m

Answer

T1 = 25.46 N·m
16.Gears & gear trains

Answer: nout = 1800 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 3000·60/80 = 2250 rpm = nC

Second stage

nout = 2250·36/45 = 1800 rpm

Answer

nout = 1800 rpm

total ratio = 1.667 : 1

17.Springs & pendulums

Answer: T = 3.108 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.4/9.81) = 3.108 s

Answer

T = 3.108 s
18.Springs & pendulums

Answer: U = 0.1 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Total energy

E = ½·k·A² = ½·80·0.09² = 0.324 J

Spring energy at x

U = ½·k·x² = ½·80·0.05² = 0.1 J

Answer

U = 0.1 J
19.Mechanical vibrations

Answer: ζ = 0.09798

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(100000·15) = 2449 N·s/m

Damping ratio

ζ = c/cc = 240/2449 = 0.09798

Answer

ζ = 0.09798

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 1.796 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 30 + 5 = 35 kN/m
keq = 35·20/(35 + 20) = 12.73 kN/m

Natural frequency

ωn = √(12727/100) = 11.28 rad/s
fn = 11.28/(2π) = 1.796 Hz

Answer

fn = 1.796 Hz

ExamProblems · examproblems.com/courses/dynamics