Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 4.5 m/s²car21 m/s

A car speeding at a constant 21 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 4.5 m/s². How long does it take the police car to catch up? Find t.

vcar = 21 m/sapolice = 4.5 m/s²v0,police = 0
t = s
2.KinematicsHard
AB: 23 m/s55 m

Ball A is dropped from rest from a height of 55 m. At the same instant ball B is thrown straight up from the ground directly below at 23 m/s. Ignore air resistance and use g = 9.81 m/s². At what height y above the ground do they meet?

H = 55 mv0B = 23 m/sg = 9.81 m/s²
y = m
3.Newton’s lawsMedium
θ = 35°a = ?m = 16 kg

A 16 kg block slides down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 16 kgθ = 35°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
5 kg3 kgTF = 30 Nμ = 0.3

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 30 N pulls the front 3 kg block; the 5 kg block is towed behind. The coefficient of kinetic friction is 0.3 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 5 kgm2 = 3 kgF = 30 Nμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 10 m/s50°x = ?

A ball is launched at 50° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 10 m/sθ = 50°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 45 mv0​ = 13 m/s25°x = ?

A ball is launched at 25° above horizontal from the top of a 45 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 13 m/sθ = 25°h = 45 mg = 9.81 m/s²
x = m
7.Circular motionMedium
θ = ?to centre40 km/h

A road engineer wants cars to take a curve of radius 290 m at 40 km/h without relying on friction. Use g = 9.81 m/s². Find the banking angle θ.

r = 290 mv = 40 km/hg = 9.81 m/s²
θ = °
8.Circular motionHard
R = 5 mh = 19.5 m

A 0.5 kg cart is released from rest at a height of 19.5 m on a frictionless track and runs through a vertical loop of radius 5 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.

m = 0.5 kgh = 19.5 mR = 5 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
40°d = 12 mμ = 0.3

A 0.5 kg block slides 12 m down a slope at 40° to the horizontal, with a coefficient of kinetic friction of 0.3. Find the work Wf done against friction.

m = 0.5 kgθ = 40°μ = 0.3d = 12 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
F = 55 N35°μ = 0.25 kg

A 5 kg block starts from rest at the bottom of a 35° slope and is pulled up the slope by a constant force of 55 N parallel to the slope. The coefficient of kinetic friction is 0.2. Find the speed v of the block after it has moved 2 m up the slope.

m = 5 kgF = 55 Nθ = 35°μ = 0.2d = 2 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
3.5 kgv = ?8 gh = 13 cm

An 8 g bullet is fired horizontally into a 3.5 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 13 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 8 gM = 3.5 kgh = 13 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
2.5 kgv = ?10 g20°L = 1.9 m

A 10 g bullet is fired horizontally into a 2.5 kg block hanging from light strings 1.9 m long, and stays in it. The strings swing out to a largest angle of 20° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 10 gM = 2.5 kgL = 1.9 mθ = 20°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
n = 1900 rpmTb​ = 120 N·mI = 14.5 kg·m²

A flywheel with a moment of inertia of 14.5 kg·m² spins at 1900 rpm. A brake applies a constant friction torque of 120 N·m. How long t does it take to stop?

I = 14.5 kg·m²n = 1900 rpmTb = 120 N·m
t = s
14.Rigid-body rotationHard
θ = 35°vs = 3 m

A solid cylinder starts from rest and rolls without slipping down a slope inclined at 35° to the horizontal. Use g = 9.81 m/s². Its radius is 0.05 m. Find its angular velocity ω after it has rolled 3 m along the slope.

θ = 35°s = 3 mI = ½·m·r²g = 9.81 m/s²r = 0.05 m
ω = rad/s
15.Gears & gear trainsMedium
N1​N2​ = ?

Two parallel shafts are 120 mm apart. They must be connected by a pair of spur gears with a module of 2 mm and a speed reduction of 5 : 1. How many teeth N2 must the gear have?

a = 120 mmm = 2 mmi = 5
N2 =
16.Gears & gear trainsHard
d1​ = 125 mmd2​ = 500 mm1440 rpmC = 600 mmT1​ = 2000 NT2​P = ?

An open belt connects a 125 mm driving pulley at 1440 rpm to a 500 mm pulley; the centres are 600 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 2000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 125 mmn1 = 1440 rpmd2 = 500 mmC = 600 mmμ = 0.25T1 = 2000 N
P = kW
17.Springs & pendulumsMedium
L = 2.8 m

A simple pendulum has a length of 2.8 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.8 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
0.5 kgk = 1300 N/m500 m/s

A 15 g bullet moving at 500 m/s hits and stays in a 0.5 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 1300 N/m. Find the amplitude A of the resulting oscillation in cm.

m = 15 gv = 500 m/sM = 0.5 kgk = 1300 N/m
A = cm
19.Mechanical vibrationsMedium
tx10 mm4 cycles3.7 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 10 mm is followed 4 cycles later by a peak of 3.7 mm. Find the damping ratio ζ.

x0 = 10 mmx4 = 3.7 mmn = 4
ζ =
20.Mechanical vibrationsHard
k1​ = 15k2​ = 20m = 20 kg

A 20 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 15 kN/m and k₂ = 20 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 20 kgk1 = 15 kN/mk2 = 20 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: t = 9.333 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·21/4.5 = 9.333 s

Answer

t = 9.333 s

At that moment the police car moves at 2v = 42 m/s.

2.Kinematics

Answer: y = 26.95 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Meeting time

Up is positive, the ground is y = 0.

55 − ½g·t² = 23·t − ½g·t² → t = 55/23 = 2.391 s

Meeting height

y = 23·2.391 − ½·9.81·2.391² = 26.95 m

Answer

y = 26.95 m
3.Newton’s laws

Answer: a = 4.02 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 35° − 0.2·cos 35°) = 9.81·(0.5736 − 0.1638) = 4.02 m/s²

Answer

a = 4.02 m/s²
4.Newton’s laws

Answer: T = 18.75 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (30 − 23.54)/8 = 0.807 m/s²

Rear block alone

T = m1·(a + μ·g) = 5·(0.807 + 2.943) = 18.75 N

Answer

T = 18.75 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: x = 10.04 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 10·cos 50° = 6.428 m/s
vy = v0·sin θ = 10·sin 50° = 7.66 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·7.66/9.81 = 1.562 s

Horizontal distance

x = vx·t = 6.428·1.562 = 10.04 m

Answer

x = 10.04 m
6.Projectile motion

Answer: x = 42.89 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 13·cos 25° = 11.78 m/s
vy = v0·sin θ = 13·sin 25° = 5.494 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 45 + 5.494·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (5.494 + √(30.18 + 882.9))/9.81 = 3.64 s

Horizontal distance

x = vx·t = 11.78·3.64 = 42.89 m

Answer

x = 42.89 m
7.Circular motion

Answer: θ = 2.485 °

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Units

v = 40/3.6 = 11.11 m/s

Banking angle

tan θ = v²/(r·g) = 11.11²/(290·9.81) = 0.0434
θ = 2.485°

Answer

θ = 2.485°
8.Circular motion

Answer: Nbottom = 43.16 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·19.5 = 382.6 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R + m·g = 0.5·382.6/5 + 4.905 = 43.16 N

Answer

Nbottom = 43.16 N
9.Work & energy

Answer: Wf = 13.53 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 4.905·0.766 = 3.757 N
F = μN = 0.3·3.757 = 1.127 N

Work against friction

Wf = F·d = 1.127·12 = 13.53 J

Answer

Wf = 13.53 J
10.Work & energy

Answer: v = 3.881 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 5·9.81 = 49.05 N
mg·sin θ = 28.13 N
μ·mg·cos θ = 8.036 N

Work–energy

½mv² = (55 − 36.17)·2 = 37.66 J
v = √(2·37.66/5) = 3.881 m/s

Answer

v = 3.881 m/s
11.Momentum & collisions

Answer: v = 700.3 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.13) = 1.597 m/s

Collision

m·v = (m + M)·V → v = (0.008 + 3.5)·1.597/0.008 = 700.3 m/s

Answer

v = 700.3 m/s
12.Momentum & collisions

Answer: v = 376.3 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.9·(1 − cos 20°) = 0.1146 m

Speed after impact

V = √(2·9.81·0.1146) = 1.499 m/s

Collision

v = (m + M)·V/m = 2.51·1.499/0.01 = 376.3 m/s

Answer

v = 376.3 m/s
13.Rigid-body rotation

Answer: t = 24.04 s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1900/60 = 199 rad/s

Deceleration and time

α = Tb/I = 120/14.5 = 8.276 rad/s²
t = ω/α = 199/8.276 = 24.04 s

Answer

t = 24.04 s
14.Rigid-body rotation

Answer: ω = 94.88 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 3·sin 35° = 1.721 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.5)
v = √(2·9.81·1.721/1.5) = 4.744 m/s
ω = v/r = 4.744/0.05 = 94.88 rad/s

Answer

ω = 94.88 rad/s
15.Gears & gear trains

Answer: N2 = 100

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·120/2 = 120

Split by the ratio

N1 = 120/(1 + 5) = 20
N2 = 5·20 = 100

Answer

N2 = 100
16.Gears & gear trains

Answer: P = 8.775 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.506 rad

Slack-side tension

eμθ = e0.6265 = 1.871, T₂ = 2000/1.871 = 1069 N

Power

P = (2000 − 1069)·9.425 = 8.775 kW

Answer

P = 8.775 kW
17.Springs & pendulums

Answer: T = 3.357 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.8/9.81) = 3.357 s

Answer

T = 3.357 s
18.Springs & pendulums

Answer: A = 28.99 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Speed after impact

V = m·v/(m + M) = 0.015·500/0.515 = 14.56 m/s

Angular frequency

ω = √(k/(m + M)) = √(1300/0.515) = 50.24 rad/s

Amplitude

A = V/ω = 14.56/50.24 = 0.2899 m = 28.99 cm

Answer

A = 28.99 cm
19.Mechanical vibrations

Answer: ζ = 0.03953

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/4)·ln(10/3.7) = 0.2486

Damping ratio

ζ = δ/√(4π² + δ²) = 0.2486/√(39.48 + 0.06178) = 0.03953

Answer

ζ = 0.03953
20.Mechanical vibrations

Answer: keq = 35 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 15 + 20 = 35 kN/m

Answer

keq = 35 kN/m

ExamProblems · examproblems.com/courses/dynamics