In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A driver moving at 120 km/h sees an obstacle. Her reaction time is 1.1 s, after which the car brakes with a constant deceleration of 7 m/s². Find the total stopping distance d from the moment she sees the obstacle.
v₀ = 120 km/htr = 1.1 sa = −7 m/s²
d = m
2.KinematicsHard
A stone is dropped from rest into a well. The splash is heard 2 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.
ttotal = 2 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
A box slides across a level floor with an initial speed of 8 m/s and comes to rest after 16 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.
v₀ = 8 m/sd = 16 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
A 5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5 kg mass. The coefficient of kinetic friction between block and table is 0.25. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 5 kgm2 = 5 kgμ = 0.25g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 70° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 32 m/sθ = 70°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is launched at 50° above horizontal from the top of a 50 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 11 m/sθ = 50°h = 50 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A road engineer wants cars to take a curve of radius 230 m at 120 km/h without relying on friction. Use g = 9.81 m/s². Find the banking angle θ.
r = 230 mv = 120 km/hg = 9.81 m/s²
θ = °
8.Circular motionHard
A ball on a string 1.3 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?
r = 1.3 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
A block slides from rest down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.35. Find its speed v after it has slid 6 m along the slope.
θ = 45°μ = 0.35d = 6 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
A 5 kg cart is released from rest at a height of 4.8 m on a smooth track that leads into a vertical circular loop of radius 1.5 m. Find the normal force N the track exerts on the cart at the top of the loop.
m = 5 kgh = 4.8 mR = 1.5 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
A 0.5 kg glider moving at 3 m/s makes a perfectly elastic head-on collision with a 1.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 0.5 kgm2 = 1.5 kgv1 = 3 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
A 2000 kg car runs into a parked 1100 kg car. The wrecks lock together and skid 16.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.
A flywheel with a moment of inertia of 18.5 kg·m² spins at 1000 rpm. A brake applies a constant friction torque of 20 N·m. How long t does it take to stop?
I = 18.5 kg·m²n = 1000 rpmTb = 20 N·m
t = s
14.Rigid-body rotationHard
A solid sphere of mass 8 kg rolls without slipping at 7 m/s. Find its total kinetic energy Ek.
m = 8 kgv = 7 m/sI = (2/5)·m·r²
Ek = J
15.Gears & gear trainsMedium
An 80 mm pulley at 1440 rpm drives a 200 mm pulley by a belt with 4 % slip. Find the speed n2 of the driven pulley.
n1 = 1440 rpmd1 = 80 mmd2 = 200 mms = 4 %
n2 = rpm
16.Gears & gear trainsHard
An open belt connects an 80 mm driving pulley at 1500 rpm to a 400 mm pulley; the centres are 500 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 800 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).
How long must a simple pendulum be to have a period of 2.2 s? Use g = 9.81 m/s². Find L.
T = 2.2 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
A 0.3 kg mass on a spring with k = 410 N/m is pulled 12 cm from equilibrium and released. Find its maximum speed vmax.
m = 0.3 kgk = 410 N/mA = 12 cm
vmax = m/s
19.Mechanical vibrationsMedium
A 10 kg mass is supported by a spring with a stiffness of 8 kN/m and a viscous damper with a damping coefficient of 60 N·s/m. Find the damping ratio ζ.
m = 10 kgk = 8 kN/mc = 60 N·s/m
ζ =
20.Mechanical vibrationsHard
A 40 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 60 kN/m and k₂ = 20 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 40 kgk1 = 60 kN/mk2 = 20 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: d = 116 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 120/3.6 = 33.33 m/s
Reaction distance
d1 = v₀·tr = 33.33·1.1 = 36.67 m
Braking distance
d2 = v₀²/(2a) = 33.33²/(2·7) = 79.37 m
Total
d = 36.67 + 79.37 = 116 m
Answer
d = 116 m
2.Kinematics
Answer: d = 18.57 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Two parts of the time
½·9.81·t₁² = 343·(2 − t₁)
4.905·t₁² + 343·t₁ − 686 = 0
Fall time
Only the positive root is physical.
t₁ = (−343 + √(343² + 4·4.905·686))/(2·4.905) = 1.946 s
Depth
d = ½·9.81·1.946² = 18.57 m
Answer
d = 18.57 m
3.Newton’s laws
Answer: μ = 0.2039
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
a = v₀²/(2d) = 8²/(2·16) = 2 m/s²
Friction coefficient
μ·m·g = m·a → μ = a/g = 2/9.81 = 0.2039
Answer
μ = 0.2039
4.Newton’s laws
Answer: a = 3.679 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 32·cos 70° = 10.94 m/s
vy = v0·sin θ = 32·sin 70° = 30.07 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·30.07/9.81 = 6.131 s
Horizontal distance
x = vx·t = 10.94·6.131 = 67.1 m
Answer
x = 67.1 m
6.Projectile motion
Answer: t = 4.165 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 11·cos 50° = 7.071 m/s
vy = v0·sin θ = 11·sin 50° = 8.426 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 50 + 8.426·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (8.426 + √(71.01 + 981))/9.81 = 4.165 s
Answer
t = 4.165 s
7.Circular motion
Answer: θ = 26.22 °
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Units
v = 120/3.6 = 33.33 m/s
Banking angle
tan θ = v²/(r·g) = 33.33²/(230·9.81) = 0.4924
θ = 26.22°
Answer
θ = 26.22°
8.Circular motion
Answer: vmin = 3.571 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Tension zero at the top
m·g = m·v²/r → v = √(g·r) = √(9.81·1.3) = 3.571 m/s
Answer
vmin = 3.571 m/s
9.Work & energy
Answer: v = 7.356 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·6·(0.7071 − 0.35·0.7071)) = 7.356 m/s
Answer
v = 7.356 m/s
10.Work & energy
Answer: N = 68.67 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(4.8 − 3) = 35.32 m²/s²
Forces at the top
m·g = 5·9.81 = 49.05 N
N = mv²/R − mg = 5·35.32/1.5 − 49.05 = 68.67 N
Answer
N = 68.67 N
The cart just makes it round when h = 2.5R; then N = 0 at the top.
11.Momentum & collisions
Answer: v′2 = 1.5 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (0.5 − 1.5)/(0.5 + 1.5)·3 = −1.5 m/s
v′2 = 2·0.5/(0.5 + 1.5)·3 = 1.5 m/s
Answer
v′2 = 1.5 m/s
12.Momentum & collisions
Answer: v1 = 23.33 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·1000/60 = 104.7 rad/s
Deceleration and time
α = Tb/I = 20/18.5 = 1.081 rad/s²
t = ω/α = 104.7/1.081 = 96.87 s
Answer
t = 96.87 s
14.Rigid-body rotation
Answer: Ek = 274.4 J
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Speed without slip
1440·80/200 = 576 rpm
With slip
n2 = 576·0.96 = 553 rpm
Answer
n2 = 553 rpm
16.Gears & gear trains
Answer: P = 2.329 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Angle of wrap
θ = 2.49 rad
Slack-side tension
eμθ = e0.6225 = 1.864, T₂ = 800/1.864 = 429.3 N
Power
P = (800 − 429.3)·6.283 = 2.329 kW
Answer
P = 2.329 kW
17.Springs & pendulums
Answer: L = 1.203 m
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for the length
L = g·(T/2π)² = 9.81·(2.2/2π)² = 1.203 m
Answer
L = 1.203 m
18.Springs & pendulums
Answer: vmax = 4.436 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(410/0.3) = 36.97 rad/s
Maximum speed
vmax = A·ω = 0.12·36.97 = 4.436 m/s
Answer
vmax = 4.436 m/s
19.Mechanical vibrations
Answer: ζ = 0.1061
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(8000·10) = 565.7 N·s/m
Damping ratio
ζ = c/cc = 60/565.7 = 0.1061
Answer
ζ = 0.1061
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 7.118 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.