Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)2.778 s12.5

A car driving at 45 km/h brakes with a constant deceleration of 4.5 m/s² until it stops. Find the braking distance s.

v₀ = 45 km/ha = −4.5 m/s²v = 0
s = m
2.KinematicsHard
a = 28 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 28 m/s² for 1.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 28 m/s²t1 = 1.5 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 45°a = ?m = 10 kg

A 10 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 10 kgθ = 45°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 2 kg2.5 kgμ = 0.3

A 2 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 2.5 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 2 kgm2 = 2.5 kgμ = 0.3g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 30 m/sθ = ?R = 60 m

A ball is launched from level ground at 30 m/s and must land 60 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 30 m/sR = 60 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 15 mv0​ = 14 m/s40°range

A ball is launched at 40° above horizontal from the top of a 15 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 14 m/sθ = 40°h = 15 mg = 9.81 m/s²
t = s
7.Circular motionMedium
θ = ?to centre40 km/h

A road engineer wants cars to take a curve of radius 230 m at 40 km/h without relying on friction. Use g = 9.81 m/s². Find the banking angle θ.

r = 230 mv = 40 km/hg = 9.81 m/s²
θ = °
8.Circular motionHard
θ = 12°to centrevmax​ = ?

A curve of radius 50 m is banked at 12°, and the coefficient of static friction between tyres and road is 0.25. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.

r = 50 mθ = 12°μs = 0.25g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
35°d = 12 mμ = 0.15

A block slides from rest down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 12 m along the slope.

θ = 35°μ = 0.15d = 12 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 3 mL = 1.5 mμ = 0.2k = 1000 N/m

A 1 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.2) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 1 kgh = 3 mL = 1.5 mμ = 0.2k = 1000 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
500 kg10 m/s800 kg

A 500 kg car moving at 10 m/s runs into a stationary 800 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 500 kgv1 = 10 m/sm2 = 800 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
900 kgv1​ = ?1800 kg

A 900 kg car runs into a parked 1800 kg car. The wrecks lock together and skid 10 m before stopping. The coefficient of kinetic friction between tyres and road is 0.75. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 900 kgm2 = 1800 kgd = 10 mμ = 0.75g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
n = 2000 rpmTb​ = 130 N·mI = 40 kg·m²

A flywheel with a moment of inertia of 40 kg·m² spins at 2000 rpm. A brake applies a constant friction torque of 130 N·m. How long t does it take to stop?

I = 40 kg·m²n = 2000 rpmTb = 130 N·m
t = s
14.Rigid-body rotationHard
disc: 9 kgring: 6 kgn1​ = 500 rpm

A uniform solid disc (mass 9 kg, radius 0.45 m) spins freely at 500 rpm about a vertical frictionless shaft. A thin ring of mass 6 kg and the same radius is dropped onto it from rest, centred on the shaft, and the two quickly spin together. How much kinetic energy ΔE is lost in the process?

Mdisc = 9 kgMring = 6 kgR = 0.45 mn1 = 500 rpm
ΔE = J
15.Gears & gear trainsMedium
N1​N2​ = ?

Two parallel shafts are 225 mm apart. They must be connected by a pair of spur gears with a module of 3 mm and a speed reduction of 5 : 1. How many teeth N2 must the gear have?

a = 225 mmm = 3 mmi = 5
N2 =
16.Gears & gear trainsHard
A = 40B = 60C = 50D = 80

In a compound gear train, gear A (40 teeth) on the input shaft turning at 1440 rpm drives gear B (60 teeth). Gear C (50 teeth) is fixed to the same shaft as B and drives gear D (80 teeth) on the output shaft. Find the output speed nout.

nin = 1440 rpmA = 40B = 60C = 50D = 80
nout = rpm
17.Springs & pendulumsMedium
L = 2.1 m

A simple pendulum has a length of 2.1 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.1 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
t (s)x (cm)t = ?4.5

A body oscillates in simple harmonic motion with period 1.6 s and amplitude 18 cm. What is the shortest time t it needs to move from equilibrium to a displacement of 4.5 cm?

T = 1.6 sA = 18 cmx = 4.5 cm
t = s
19.Mechanical vibrationsMedium
tx50 mm4 cycles18.3 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 50 mm is followed 4 cycles later by a peak of 18.3 mm. Find the damping ratio ζ.

x0 = 50 mmx4 = 18.3 mmn = 4
ζ =
20.Mechanical vibrationsHard
k1​ = 25k2​ = 80k3​ = 80m = 40 kg

A 40 kg mass hangs from spring k₃ = 80 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 25 kN/m and k₂ = 80 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 25 kN/mk2 = 80 kN/mk3 = 80 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 17.36 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 45/3.6 = 12.5 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·4.5) = 17.36 m

Answer

s = 17.36 m
2.Kinematics

Answer: hmax = 121.4 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 28·1.5 = 42 m/s
h₁ = ½·28·1.5² = 31.5 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 42²/(2·9.81) = 89.91 m
hmax = 31.5 + 89.91 = 121.4 m

Answer

hmax = 121.4 m
3.Newton’s laws

Answer: a = 5.203 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 45° − 0.25·cos 45°) = 9.81·(0.7071 − 0.1768) = 5.203 m/s²

Answer

a = 5.203 m/s²
4.Newton’s laws

Answer: a = 4.142 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (24.53 − 5.886)/4.5 = 4.142 m/s²

Answer

a = 4.142 m/s²
5.Projectile motion

Answer: θ = 20.42 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·60/30² = 0.654

Angle

2θ = 40.84° → θ = 20.42°

Answer

θ = 20.42°

The other solution is 90° − θ = 69.58°.

6.Projectile motion

Answer: t = 2.892 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 14·cos 40° = 10.72 m/s
vy = v0·sin θ = 14·sin 40° = 8.999 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 15 + 8.999·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (8.999 + √(80.98 + 294.3))/9.81 = 2.892 s

Answer

t = 2.892 s
7.Circular motion

Answer: θ = 3.132 °

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Units

v = 40/3.6 = 11.11 m/s

Banking angle

tan θ = v²/(r·g) = 11.11²/(230·9.81) = 0.05472
θ = 3.132°

Answer

θ = 3.132°
8.Circular motion

Answer: vmax = 15.48 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points down the slope.

N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g

Speed

v = √(50·9.81·0.4524/0.9262) = 15.48 m/s

Answer

vmax = 15.48 m/s
(55.73 km/h)
9.Work & energy

Answer: v = 10.3 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·12·(0.5736 − 0.15·0.8192)) = 10.3 m/s

Answer

v = 10.3 m/s
10.Work & energy

Answer: v = 7.278 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 9.81·(3 − 0.2·1.5) = 26.49 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·2.7) = 7.278 m/s

Answer

v = 7.278 m/s
11.Momentum & collisions

Answer: ΔK = 15385 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 500·10/1300 = 3.846 m/s

Kinetic energy before and after

Kbefore = ½·500·10² = 25000 J
Kafter = ½·1300·3.846² = 9615 J

Energy lost

ΔK = 25000 − 9615 = 15385 J

Answer

ΔK = 15385 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: v1 = 36.39 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.75·9.81·10) = 12.13 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 2700·12.13/900 = 36.39 m/s

Answer

v1 = 36.39 m/s
(131 km/h)
13.Rigid-body rotation

Answer: t = 64.44 s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·2000/60 = 209.4 rad/s

Deceleration and time

α = Tb/I = 130/40 = 3.25 rad/s²
t = ω/α = 209.4/3.25 = 64.44 s

Answer

t = 64.44 s
14.Rigid-body rotation

Answer: ΔE = 713.8 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = ½·9·0.45² = 0.9113 kg·m²
I2 = 6·0.45² = 1.215 kg·m²

Conservation of angular momentum

n2 = n1·I1/(I1 + I2) = 500·0.9113/2.126 = 214.3 rpm

Kinetic energy before and after

E1 = ½·0.9113·52.36² = 1249 J
E2 = ½·2.126·22.44² = 535.3 J
ΔE = 1249 − 535.3 = 713.8 J

Answer

ΔE = 713.8 J
15.Gears & gear trains

Answer: N2 = 125

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·225/3 = 150

Split by the ratio

N1 = 150/(1 + 5) = 25
N2 = 5·25 = 125

Answer

N2 = 125
16.Gears & gear trains

Answer: nout = 600 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1440·40/60 = 960 rpm = nC

Second stage

nout = 960·50/80 = 600 rpm

Answer

nout = 600 rpm

total ratio = 2.4 : 1

17.Springs & pendulums

Answer: T = 2.907 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.1/9.81) = 2.907 s

Answer

T = 2.907 s
18.Springs & pendulums

Answer: t = 0.06434 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/1.6 = 3.927 rad/s

Solve for the time

0.25 = sin(ω·t) → ω·t = arcsin(0.25) = 0.2527 rad
t = 0.2527/3.927 = 0.06434 s

Answer

t = 0.06434 s
19.Mechanical vibrations

Answer: ζ = 0.03996

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/4)·ln(50/18.3) = 0.2513

Damping ratio

ζ = δ/√(4π² + δ²) = 0.2513/√(39.48 + 0.06314) = 0.03996

Answer

ζ = 0.03996
20.Mechanical vibrations

Answer: fn = 5.362 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 25 + 80 = 105 kN/m
keq = 105·80/(105 + 80) = 45.41 kN/m

Natural frequency

ωn = √(45405/40) = 33.69 rad/s
fn = 33.69/(2π) = 5.362 Hz

Answer

fn = 5.362 Hz

ExamProblems · examproblems.com/courses/dynamics