In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 108 km/h brakes with a constant deceleration of 5.5 m/s² until it stops. How long does braking take? Find t.
v₀ = 108 km/ha = −5.5 m/s²v = 0
t = s
2.KinematicsHard
A tram starts from rest and accelerates at 1 m/s² for 11 s, then runs at constant speed for 23 s, and finally brakes at 5 m/s² until it stops. Find the total distance s between the two stops.
a1 = 1 m/s²t1 = 11 st2 = 23 sa3 = −5 m/s²
s = m
3.Newton’s lawsMedium
An 8 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 8 kgθ = 40°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 9 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 0.5 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 9 kgm2 = 0.5 kgμ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 50° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.
v0 = 10 m/sθ = 50°g = 9.81 m/s²
H = m
6.Projectile motionHard
A ball is launched at 25° above horizontal from the top of a 35 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 10 m/sθ = 25°h = 35 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A car takes a flat curve of radius 100 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 100 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 1.6 kg ball on a string 1.3 m long is swung in a vertical circle. At the lowest point it moves at 3.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 1.6 kgr = 1.3 mv = 3.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
A toy launcher has a vertical spring of stiffness 200 N/m. A 0.05 kg ball is placed on it and the spring is compressed by 5 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.
m = 0.05 kgk = 200 N/mx = 5 cmg = 9.81 m/s²
h = m
10.Work & energyHard
A 10 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2 m long (μ = 0.2) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 10 kgh = 5 mL = 2 mμ = 0.2k = 1000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
A 15 g bullet is fired horizontally into a 1 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 19 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 15 gM = 1 kgh = 19 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
A 0.35 kg ball hits a wall at 28 m/s and bounces straight back at 11 m/s. The contact lasts 10 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.35 kgvin = 28 m/svout = 11 m/sΔt = 10 ms
J = N·s
13.Rigid-body rotationMedium
A motor delivers a torque of 1550 N·m at 2600 rpm. Find its power output P in kW.
T = 1550 N·mn = 2600 rpm
P = kW
14.Rigid-body rotationHard
A solid sphere of mass 14 kg rolls without slipping at 3 m/s. What percentage p of its total kinetic energy is rotational?
m = 14 kgv = 3 m/sI = (2/5)·m·r²
p = %
15.Gears & gear trainsMedium
A 3 kW motor running at 960 rpm drives a pinion with 18 teeth, which meshes with a gear with 30 teeth. The gear pair has an efficiency of 96%. Find the output torque T2 on the gear shaft.
P = 3 kWn1 = 960 rpmN1 = 18N2 = 30η = 96%
T2 = N·m
16.Gears & gear trainsHard
An open belt connects a 150 mm driving pulley at 960 rpm to a 315 mm pulley; the centres are 600 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 1000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).
How long must a simple pendulum be to have a period of 2.4 s? Use g = 9.81 m/s². Find L.
T = 2.4 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
A mass on a spring with k = 180 N/m oscillates on a frictionless surface with an amplitude of 5 cm. Find the energy U stored in the spring when the mass is 4 cm from equilibrium.
k = 180 N/mA = 5 cmx = 4 cm
U = J
19.Mechanical vibrationsMedium
A 50 kg mass on a spring with a stiffness of 5 kN/m has a viscous damper giving a damping ratio of 0.6. Find the damped natural frequency fd of its free vibration in Hz.
m = 50 kgk = 5 kN/mζ = 0.6
fd = Hz
20.Mechanical vibrationsHard
A 20 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 50 kN/m and the lower one k₂ = 80 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.
m = 20 kgk1 = 50 kN/mk2 = 80 kN/m
keq = kN/m
3Solutions
1.Kinematics
Answer: t = 5.455 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 108/3.6 = 30 m/s
Braking time
0 = v₀ − a·t → t = v₀/a = 30/5.5 = 5.455 s
Answer
t = 5.455 s
2.Kinematics
Answer: s = 325.6 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Top speed
v = a1·t1 = 1·11 = 11 m/s
Distance of each phase
s1 = ½·1·11² = 60.5 m
s2 = 11·23 = 253 m
s3 = 11²/(2·5) = 12.1 m
Total distance
s = 60.5 + 253 + 12.1 = 325.6 m
Answer
s = 325.6 m
3.Newton’s laws
Answer: a = 4.051 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 10·cos 50° = 6.428 m/s
vy = v0·sin θ = 10·sin 50° = 7.66 m/s
Highest point
At the top the vertical velocity is zero: vy² = 2gH.
H = vy²/(2g) = 7.66²/(2·9.81) = 2.991 m
Answer
H = 2.991 m
6.Projectile motion
Answer: x = 28.43 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 10·cos 25° = 9.063 m/s
vy = v0·sin θ = 10·sin 25° = 4.226 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 35 + 4.226·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (4.226 + √(17.86 + 686.7))/9.81 = 3.137 s
Horizontal distance
x = vx·t = 9.063·3.137 = 28.43 m
Answer
x = 28.43 m
7.Circular motion
Answer: vmax = 24.26 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·100) = 24.26 m/s
Answer
vmax = 24.26 m/s (87.34 km/h)
8.Circular motion
Answer: T = 30.77 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 1.6·9.81 + 1.6·3.5²/1.3 = 15.7 + 15.08 = 30.77 N
Answer
T = 30.77 N
9.Work & energy
Answer: h = 0.5097 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Spring energy
x = 5 cm = 0.05 m
½kx² = ½·200·0.05² = 0.25 J
Height
m·g = 0.05·9.81 = 0.4905 N
h = ½kx²/(mg) = 0.25/0.4905 = 0.5097 m
Answer
h = 0.5097 m
10.Work & energy
Answer: x = 95 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 98.1·(5 − 0.2·2) = 451.3 J
Maximum compression
½kx² = 451.3 → x = √(2·451.3/1000) = 0.95 m = 95 cm
Answer
x = 95 cm
11.Momentum & collisions
Answer: v = 130.6 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Swing after impact
V = √(2·g·h) = √(2·9.81·0.19) = 1.931 m/s
Collision
m·v = (m + M)·V → v = (0.015 + 1)·1.931/0.015 = 130.6 m/s
Answer
v = 130.6 m/s
12.Momentum & collisions
Answer: J = 13.65 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.35·(11 + 28) = 13.65 N·s
Answer
J = 13.65 N·s
13.Rigid-body rotation
Answer: P = 422 kW
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·2600/60 = 272.3 rad/s
Power
P = T·ω = 1550·272.3 = 422021 W = 422 kW
Answer
P = 422 kW
14.Rigid-body rotation
Answer: p = 28.57 %
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
The share depends only on the shape, not on the mass or the speed.
15.Gears & gear trains
Answer: T2 = 47.75 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Motor torque
ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 3000/100.5 = 29.84 N·m
Output torque
T2 = 29.84·30/18·0.96 = 47.75 N·m
Answer
T2 = 47.75 N·m
16.Gears & gear trains
Answer: P = 3.857 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Angle of wrap
θ = 2.866 rad
Slack-side tension
eμθ = e0.7164 = 2.047, T₂ = 1000/2.047 = 488.5 N
Power
P = (1000 − 488.5)·7.54 = 3.857 kW
Answer
P = 3.857 kW
17.Springs & pendulums
Answer: L = 1.431 m
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for the length
L = g·(T/2π)² = 9.81·(2.4/2π)² = 1.431 m
Answer
L = 1.431 m
18.Springs & pendulums
Answer: U = 0.144 J
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Total energy
E = ½·k·A² = ½·180·0.05² = 0.225 J
Spring energy at x
U = ½·k·x² = ½·180·0.04² = 0.144 J
Answer
U = 0.144 J
19.Mechanical vibrations
Answer: fd = 1.273 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(5000/50) = 10 rad/s
fn = 10/(2π) = 1.592 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 1.592·√(1 − 0.6²) = 1.273 Hz
Answer
fd = 1.273 Hz
20.Mechanical vibrations
Answer: keq = 30.77 kN/m
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.