Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 3 m/s²car17 m/s

A car speeding at a constant 17 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3 m/s². How far from its starting point does the police car catch up? Find d.

vcar = 17 m/sapolice = 3 m/s²v0,police = 0
d = m
2.KinematicsHard
v₀ = 14 m/s30 m

A ball is thrown straight up at 14 m/s from the edge of a roof 30 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 14 m/sh₀ = 30 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 35°a = ?m = 18 kg

An 18 kg block slides down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 18 kgθ = 35°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 2 kg0.5 kgμ = 0.1

A 2 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 0.5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 2 kgm2 = 0.5 kgμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 28 m/s65°range

A ball is launched at 65° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 28 m/sθ = 65°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 35 mv0​ = 23 m/s60°H = ?

A ball is launched at 23 m/s and 60° above the horizontal from the top of a 35 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 23 m/sθ = 60°h = 35 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 65 mvmax​ = ?

A car takes a flat curve of radius 65 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 65 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
θ = 15°to centrevmin​ = ?

A curve of radius 250 m is banked at 15°, and the coefficient of static friction between tyres and road is 0.2. Use g = 9.81 m/s². Find the lowest speed vmin at which a car can take the curve without sliding down the bank.

r = 250 mθ = 15°μs = 0.2g = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
0.2 kgk = 200 N/mh = ?

A toy launcher has a vertical spring of stiffness 200 N/m. A 0.2 kg ball is placed on it and the spring is compressed by 10 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.

m = 0.2 kgk = 200 N/mx = 10 cmg = 9.81 m/s²
h = m
10.Work & energyHard
h = 1 mL = 2.5 mμ = 0.2k = 800 N/m

A 5 kg block is released from rest at height 1 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.2) and then runs onto a spring (k = 800 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 5 kgh = 1 mL = 2.5 mμ = 0.2k = 800 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
4 kg8 m/s1 kg

A 4 kg glider moving at 8 m/s makes a perfectly elastic head-on collision with a 1 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 4 kgm2 = 1 kgv1 = 8 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
1000 kg12 m/s1000 kg20 m/sv′ = ?

At a crossing a 1000 kg car travelling east at 12 m/s collides with a 1000 kg car travelling north at 20 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.

m1 = 1000 kgv1 = 12 m/s (E)m2 = 1000 kgv2 = 20 m/s (N)
v′ = m/s
13.Rigid-body rotationMedium
0 → 700 rpmI = 28.5 kg·m²

A motor brings a flywheel with a moment of inertia of 28.5 kg·m² from rest up to 700 rpm in 50 s. Ignoring losses, find the average power Pavg it delivers, in kW.

I = 28.5 kg·m²n = 700 rpmt = 50 s
Pavg = kW
14.Rigid-body rotationHard
9.5 m/sω

A solid cylinder of mass 17.5 kg rolls without slipping at 9.5 m/s. What percentage p of its total kinetic energy is rotational?

m = 17.5 kgv = 9.5 m/sI = ½·m·r²
p = %
15.Gears & gear trainsMedium
d1​ = 125 mmd2​ = 300 mm1440 rpmT1​ = 800 NT2​ = 320 NP = ?

A belt runs on a 125 mm driving pulley at 1440 rpm. The tension is 800 N on the tight side and 320 N on the slack side. Find the power P transmitted, in kW.

d1 = 125 mmn1 = 1440 rpmT1 = 800 NT2 = 320 N
P = kW
16.Gears & gear trainsHard
A = 30B = 32C = 15D = 25

In a compound gear train, gear A (30 teeth) on the input shaft turning at 1440 rpm drives gear B (32 teeth). Gear C (15 teeth) is fixed to the same shaft as B and drives gear D (25 teeth) on the output shaft. Find the output speed nout.

nin = 1440 rpmA = 30B = 32C = 15D = 25
nout = rpm
17.Springs & pendulumsMedium
L = 1.5 m

A simple pendulum has a length of 1.5 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 1.5 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
3.5 kgk = 200 N/mA = 12 cm

A 3.5 kg mass on a spring with k = 200 N/m is pulled 12 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 3.5 kgk = 200 N/mA = 12 cm
E = J
19.Mechanical vibrationsMedium
tx50 mm4 cycles14.2 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 50 mm is followed 4 cycles later by a peak of 14.2 mm. Find the damping ratio ζ.

x0 = 50 mmx4 = 14.2 mmn = 4
ζ =
20.Mechanical vibrationsHard
k1​ = 5k2​ = 5m = 5 kg

A 5 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 5 kN/m and the lower one k₂ = 5 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 5 kN/mk2 = 5 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 192.7 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·17/3 = 11.33 s

Distance

d = v·t = 17·11.33 = 192.7 m

Answer

d = 192.7 m

At that moment the police car moves at 2v = 34 m/s.

2.Kinematics

Answer: t = 4.282 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−30 = 14·t − ½·9.81·t²
4.905·t² − 14·t − 30 = 0

Solve the quadratic

Only the positive root is physical.

t = (14 + √(14² + 2·9.81·30))/9.81 = 4.282 s

Answer

t = 4.282 s
3.Newton’s laws

Answer: a = 4.823 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 35° − 0.1·cos 35°) = 9.81·(0.5736 − 0.08192) = 4.823 m/s²

Answer

a = 4.823 m/s²
4.Newton’s laws

Answer: T = 4.316 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (4.905 − 1.962)/2.5 = 1.177 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 2·1.177 + 1.962 = 4.316 N

Answer

T = 4.316 N
5.Projectile motion

Answer: t = 5.174 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 28·cos 65° = 11.83 m/s
vy = v0·sin θ = 28·sin 65° = 25.38 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·25.38/9.81 = 5.174 s

Answer

t = 5.174 s
6.Projectile motion

Answer: H = 55.22 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 23·sin 60° = 19.92 m/s

Rise above the cliff

Δh = vy²/(2g) = 19.92²/(2·9.81) = 20.22 m

Height above the ground

H = 35 + 20.22 = 55.22 m

Answer

H = 55.22 m
7.Circular motion

Answer: vmax = 17.86 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·65) = 17.86 m/s

Answer

vmax = 17.86 m/s (64.28 km/h)
8.Circular motion

Answer: vmin = 12.58 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points up the slope.

N·(sin θ − μ·cos θ) = m·v²/r
N·(cos θ + μ·sin θ) = m·g

Speed

v = √(250·9.81·0.06563/1.018) = 12.58 m/s

Answer

vmin = 12.58 m/s
(45.28 km/h)
9.Work & energy

Answer: h = 0.5097 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 10 cm = 0.1 m
½kx² = ½·200·0.1² = 1 J

Height

m·g = 0.2·9.81 = 1.962 N
h = ½kx²/(mg) = 1/1.962 = 0.5097 m

Answer

h = 0.5097 m
10.Work & energy

Answer: v = 3.132 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 49.05·(1 − 0.2·2.5) = 24.53 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·0.5) = 3.132 m/s

Answer

v = 3.132 m/s
11.Momentum & collisions

Answer: v′1 = 4.8 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (4 − 1)/(4 + 1)·8 = 4.8 m/s
v′2 = 2·4/(4 + 1)·8 = 12.8 m/s

Answer

v′1 = 4.8 m/s
12.Momentum & collisions

Answer: v′ = 11.66 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1000·12 = 12000 kg·m/s
py = 1000·20 = 20000 kg·m/s

Speed of the wreck

v′ = √(px² + py²)/(m1 + m2) = 23324/2000 = 11.66 m/s

Answer

v′ = 11.66 m/s
13.Rigid-body rotation

Answer: Pavg = 1.531 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·700/60 = 73.3 rad/s

Energy

E = ½·I·ω² = ½·28.5·73.3² = 76572 J

Average power

Pavg = E/t = 76572/50 = 1531 W = 1.531 kW

Answer

Pavg = 1.531 kW
14.Rigid-body rotation

Answer: p = 33.33 %

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·17.5·9.5² = 789.7 J
Erot = ½·I·ω² = ½·0.5·m·r²·(v/r)² = 0.5·789.7 = 394.8 J

Rotational share

p = 394.8/1185·100% = c/(1 + c)·100% = 33.33%

Answer

p = 33.33 %

The share depends only on the shape, not on the mass or the speed.

15.Gears & gear trains

Answer: P = 4.524 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 9.425 m/s

Power

P = (800 − 320)·9.425 = 4524 W = 4.524 kW

Answer

P = 4.524 kW
16.Gears & gear trains

Answer: nout = 810 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1440·30/32 = 1350 rpm = nC

Second stage

nout = 1350·15/25 = 810 rpm

Answer

nout = 810 rpm

total ratio = 1.778 : 1

17.Springs & pendulums

Answer: T = 2.457 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(1.5/9.81) = 2.457 s

Answer

T = 2.457 s
18.Springs & pendulums

Answer: E = 1.44 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(200/3.5) = 7.559 rad/s

Energy

E = ½·k·A² = ½·200·0.12² = 1.44 J

Answer

E = 1.44 J
19.Mechanical vibrations

Answer: ζ = 0.05002

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/4)·ln(50/14.2) = 0.3147

Damping ratio

ζ = δ/√(4π² + δ²) = 0.3147/√(39.48 + 0.09903) = 0.05002

Answer

ζ = 0.05002
20.Mechanical vibrations

Answer: fn = 3.559 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/5 + 1/5 → keq = 5·5/(5 + 5) = 2.5 kN/m

Natural frequency

ωn = √(2500/5) = 22.36 rad/s
fn = 22.36/(2π) = 3.559 Hz

Answer

fn = 3.559 Hz

ExamProblems · examproblems.com/courses/dynamics