Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 4.5 m/s²car19 m/s

A car speeding at a constant 19 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 4.5 m/s². How far from its starting point does the police car catch up? Find d.

vcar = 19 m/sapolice = 4.5 m/s²v0,police = 0
d = m
2.KinematicsHard
d = ?

A stone is dropped from rest into a well. The splash is heard 1.8 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.

ttotal = 1.8 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
θ = 25°a = ?m = 5 kg

A 5 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 5 kgθ = 25°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 9.5 kg3.5 kgμ = 0.1

A 9.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3.5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 9.5 kgm2 = 3.5 kgμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 28 m/sθ = ?R = 35 m

A ball is launched from level ground at 28 m/s and must land 35 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 28 m/sR = 35 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 10 mv0​ = 32 m/s60°H = ?

A ball is launched at 32 m/s and 60° above the horizontal from the top of a 10 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 32 m/sθ = 60°h = 10 mg = 9.81 m/s²
H = m
7.Circular motionMedium
L = 0.7 m35°

A small ball on a string of length 0.7 m moves in a horizontal circle so that the string makes a constant angle of 35° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the time T for one revolution.

L = 0.7 mθ = 35°g = 9.81 m/s²
T = s
8.Circular motionHard
r = 0.6 m11.5 m/svtop​ = ?

A 0.4 kg ball on a light string 0.6 m long is swung in a vertical circle. At the lowest point its speed is 11.5 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 0.4 kgr = 0.6 mvbottom = 11.5 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
25°d = 3 mμ = 0.15

A block slides from rest down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 3 m along the slope.

θ = 25°μ = 0.15d = 3 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 3.9 mR = 1.5 mv = ?

A 0.5 kg cart is released from rest at a height of 3.9 m on a smooth track that leads into a vertical circular loop of radius 1.5 m. Find the speed v of the cart at the top of the loop.

m = 0.5 kgh = 3.9 mR = 1.5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
1.5 kg10 m/s5 kg

A 1.5 kg glider moving at 10 m/s makes a perfectly elastic head-on collision with a 5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 1.5 kgm2 = 5 kgv1 = 10 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
8 m/s5 m/s

A 0.35 kg ball hits a wall at 8 m/s and bounces straight back at 5 m/s. The contact lasts 20 ms. Find the average force Favg of the wall on the ball.

m = 0.35 kgvin = 8 m/svout = 5 m/sΔt = 20 ms
Favg = N
13.Rigid-body rotationMedium
ω = ?L = 2.5 mm = 2.5 kg

A uniform slender rod of mass 2.5 kg and length 2.5 m is pinned at one end and released from rest in a horizontal position. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.

m = 2.5 kgL = 2.5 mg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
θ = 10°vs = 4.5 m

A solid sphere starts from rest and rolls without slipping down a slope inclined at 10° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 4.5 m along the slope.

θ = 10°s = 4.5 mI = (2/5)·m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
N1​ = 15N2​ = 72

A 1.5 kW motor running at 2900 rpm drives a pinion with 15 teeth, which meshes with a gear with 72 teeth. The gear pair has an efficiency of 97%. Find the output torque T2 on the gear shaft.

P = 1.5 kWn1 = 2900 rpmN1 = 15N2 = 72η = 97%
T2 = N·m
16.Gears & gear trainsHard
d1​ = 120 mmd2​ = 315 mm1450 rpmC = 800 mmT1​ = 1200 NT2​P = ?

An open belt connects a 120 mm driving pulley at 1450 rpm to a 315 mm pulley; the centres are 800 mm apart. The coefficient of friction is 0.35 and the tight-side tension may not exceed 1200 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 120 mmn1 = 1450 rpmd2 = 315 mmC = 800 mmμ = 0.35T1 = 1200 N
P = kW
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 2.5 s? Use g = 9.81 m/s². Find L.

T = 2.5 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
1 kgk = 900 N/m250 m/s

A 10 g bullet moving at 250 m/s hits and stays in a 1 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 900 N/m. Find the amplitude A of the resulting oscillation in cm.

m = 10 gv = 250 m/sM = 1 kgk = 900 N/m
A = cm
19.Mechanical vibrationsMedium
tx15 mm5 cycles3.1 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 15 mm is followed 5 cycles later by a peak of 3.1 mm. Find the damping ratio ζ.

x0 = 15 mmx5 = 3.1 mmn = 5
ζ =
20.Mechanical vibrationsHard
k1​ = 10k2​ = 80m = 10 kg

A 10 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 10 kN/m and the lower one k₂ = 80 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 10 kgk1 = 10 kN/mk2 = 80 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: d = 160.4 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·19/4.5 = 8.444 s

Distance

d = v·t = 19·8.444 = 160.4 m

Answer

d = 160.4 m

At that moment the police car moves at 2v = 38 m/s.

2.Kinematics

Answer: d = 15.12 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Two parts of the time

½·9.81·t₁² = 343·(1.8 − t₁)
4.905·t₁² + 343·t₁ − 617.4 = 0

Fall time

Only the positive root is physical.

t₁ = (−343 + √(343² + 4·4.905·617.4))/(2·4.905) = 1.756 s

Depth

d = ½·9.81·1.756² = 15.12 m

Answer

d = 15.12 m
3.Newton’s laws

Answer: a = 2.368 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 25° − 0.2·cos 25°) = 9.81·(0.4226 − 0.1813) = 2.368 m/s²

Answer

a = 2.368 m/s²
4.Newton’s laws

Answer: T = 27.6 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (34.34 − 9.32)/13 = 1.924 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 9.5·1.924 + 9.32 = 27.6 N

Answer

T = 27.6 N
5.Projectile motion

Answer: θ = 12.99 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·35/28² = 0.4379

Angle

2θ = 25.97° → θ = 12.99°

Answer

θ = 12.99°

The other solution is 90° − θ = 77.01°.

6.Projectile motion

Answer: H = 49.14 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 32·sin 60° = 27.71 m/s

Rise above the cliff

Δh = vy²/(2g) = 27.71²/(2·9.81) = 39.14 m

Height above the ground

H = 10 + 39.14 = 49.14 m

Answer

H = 49.14 m
7.Circular motion

Answer: T = 1.519 s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 0.7·sin 35° = 0.4015 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(0.4015·9.81·tan 35°) = 1.661 m/s

Period

T = 2π·r/v = 2π·0.4015/1.661 = 1.519 s

Answer

T = 1.519 s
8.Circular motion

Answer: Ttop = 68.55 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 11.5² − 4·9.81·0.6 = 108.7 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 0.4·108.7/0.6 − 0.4·9.81 = 68.55 N

Answer

Ttop = 68.55 N
9.Work & energy

Answer: v = 4.108 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·3·(0.4226 − 0.15·0.9063)) = 4.108 m/s

Answer

v = 4.108 m/s
10.Work & energy

Answer: v = 4.202 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(3.9 − 3) = 17.66 m²/s²
v = 4.202 m/s

Answer

v = 4.202 m/s

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′1 = −5.385 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1.5 − 5)/(1.5 + 5)·10 = −5.385 m/s
v′2 = 2·1.5/(1.5 + 5)·10 = 4.615 m/s

Answer

v′1 = −5.385 m/s

The minus sign means the first glider bounces back.

12.Momentum & collisions

Answer: Favg = 227.5 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.35·(5 + 8) = 4.55 N·s

Average force

Favg = J/Δt = 4.55/0.02 = 227.5 N

Answer

Favg = 227.5 N
13.Rigid-body rotation

Answer: ω = 3.431 rad/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 = 2.5·9.81·1.25 = 30.66 J

Moment of inertia about the pin

IO = m·L²/3 = 2.5·2.5²/3 = 5.208 kg·m²

Energy balance

½·IO·ω² = 30.66 → ω = √(2·30.66/5.208) = 3.431 rad/s

Answer

ω = 3.431 rad/s
14.Rigid-body rotation

Answer: v = 3.309 m/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 4.5·sin 10° = 0.7814 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.4)
v = √(2·9.81·0.7814/1.4) = 3.309 m/s

Answer

v = 3.309 m/s
15.Gears & gear trains

Answer: T2 = 23 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·2900/60 = 303.7 rad/s
T1 = P/ω₁ = 1500/303.7 = 4.939 N·m

Output torque

T2 = 4.939·72/15·0.97 = 23 N·m

Answer

T2 = 23 N·m
16.Gears & gear trains

Answer: P = 6.967 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.897 rad

Slack-side tension

eμθ = e1.014 = 2.757, T₂ = 1200/2.757 = 435.3 N

Power

P = (1200 − 435.3)·9.111 = 6.967 kW

Answer

P = 6.967 kW
17.Springs & pendulums

Answer: L = 1.553 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(2.5/2π)² = 1.553 m

Answer

L = 1.553 m
18.Springs & pendulums

Answer: A = 8.292 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Speed after impact

V = m·v/(m + M) = 0.01·250/1.01 = 2.475 m/s

Angular frequency

ω = √(k/(m + M)) = √(900/1.01) = 29.85 rad/s

Amplitude

A = V/ω = 2.475/29.85 = 0.08292 m = 8.292 cm

Answer

A = 8.292 cm
19.Mechanical vibrations

Answer: ζ = 0.05012

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/5)·ln(15/3.1) = 0.3153

Damping ratio

ζ = δ/√(4π² + δ²) = 0.3153/√(39.48 + 0.09943) = 0.05012

Answer

ζ = 0.05012
20.Mechanical vibrations

Answer: keq = 8.889 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/10 + 1/80 → keq = 10·80/(10 + 80) = 8.889 kN/m

Answer

keq = 8.889 kN/m

ExamProblems · examproblems.com/courses/dynamics