Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)0.6 s10

A driver moving at 36 km/h sees an obstacle. Her reaction time is 0.6 s, after which the car brakes with a constant deceleration of 6 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 36 km/htr = 0.6 sa = −6 m/s²
d = m
2.KinematicsHard
t (s)v (m/s)9 s

A tram starts from rest and accelerates at 3 m/s² for 9 s, then runs at constant speed for 7 s, and finally brakes at 3 m/s² until it stops. Find the total distance s between the two stops.

a1 = 3 m/s²t1 = 9 st2 = 7 sa3 = −3 m/s²
s = m
3.Newton’s lawsMedium
θ = 30°a = ?m = 5 kg

A 5 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 5 kgθ = 30°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 1 kg3.5 kgno friction

A 1 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3.5 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 1 kgm2 = 3.5 kgμ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 34 m/sθ = ?R = 105 m

A ball is launched from level ground at 34 m/s and must land 105 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 34 m/sR = 105 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 30 mv0​ = 17 m/s35°range

A ball is launched at 35° above horizontal from the top of a 30 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 17 m/sθ = 35°h = 30 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 120 mvmax​ = ?

A car takes a flat curve of radius 120 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 120 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
θ = 30°to centrevmax​ = ?

A curve of radius 140 m is banked at 30°, and the coefficient of static friction between tyres and road is 0.15. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.

r = 140 mθ = 30°μs = 0.15g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
54 km/h5°1500 kg

A 1500 kg car drives up a 5° slope at a constant 54 km/h. Air resistance and rolling resistance together amount to 550 N. Find the power P the wheels must deliver, in kW.

m = 1500 kgθ = 5°Fr = 550 Nv = 54 km/hg = 9.81 m/s²
P = kW
10.Work & energyHard
h = 3 mL = 4 mμ = 0.2k = 1000 N/m

A 2 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4 m long (μ = 0.2) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 2 kgh = 3 mL = 4 mμ = 0.2k = 1000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
4.5 kg2 m/s0.5 kg

A 4.5 kg glider moving at 2 m/s makes a perfectly elastic head-on collision with a 0.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 4.5 kgm2 = 0.5 kgv1 = 2 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
28 m/s6 m/s

A 0.55 kg ball hits a wall at 28 m/s and bounces straight back at 6 m/s. The contact lasts 40 ms. Find the average force Favg of the wall on the ball.

m = 0.55 kgvin = 28 m/svout = 6 m/sΔt = 40 ms
Favg = N
13.Rigid-body rotationMedium
v = ?4.5 kgL = 1.9 mm = 6 kg

A uniform slender rod of mass 6 kg and length 1.9 m is pinned at one end and released from rest in a horizontal position. A small ball of mass 4.5 kg is fixed to its free end. Ignore friction and use g = 9.81 m/s². Find the speed v of the free end as the rod swings through the vertical position.

m = 6 kgL = 1.9 mmball = 4.5 kgg = 9.81 m/s²
v = m/s
14.Rigid-body rotationHard
440 m/s35 g1 mL = 2 m5 kg

A uniform slender rod of mass 5 kg and length 2 m hangs at rest from a frictionless pivot at its top end. A 35 g bullet moving horizontally at 440 m/s hits the rod 1 m below the pivot and stays embedded. Find the angular velocity ω of the rod just after the impact.

M = 5 kgL = 2 mm = 35 gv = 440 m/sd = 1 m
ω = rad/s
15.Gears & gear trainsMedium
d1​ = 150 mmd2​ = 500 mm1450 rpmn2​ = ?

A 150 mm pulley at 1450 rpm drives a 500 mm pulley by a belt with 1 % slip. Find the speed n2 of the driven pulley.

n1 = 1450 rpmd1 = 150 mmd2 = 500 mms = 1 %
n2 = rpm
16.Gears & gear trainsHard
A = 48B = 80C = 25D = 80

In a compound gear train, gear A (48 teeth) on the input shaft turning at 1440 rpm drives gear B (80 teeth). Gear C (25 teeth) is fixed to the same shaft as B and drives gear D (80 teeth) on the output shaft. Find the output speed nout.

nin = 1440 rpmA = 48B = 80C = 25D = 80
nout = rpm
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 1.6 s? Use g = 9.81 m/s². Find L.

T = 1.6 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
0.9 kgk = 120 N/mA = 11 cm

A 0.9 kg mass on a spring with k = 120 N/m is pulled 11 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 0.9 kgk = 120 N/mA = 11 cm
E = J
19.Mechanical vibrationsMedium
tx20 mm2 cycles9.4 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 20 mm is followed 2 cycles later by a peak of 9.4 mm. Find the damping ratio ζ.

x0 = 20 mmx2 = 9.4 mmn = 2
ζ =
20.Mechanical vibrationsHard
k1​ = 5k2​ = 30k3​ = 80m = 100 kg

A 100 kg mass hangs from spring k₃ = 80 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 5 kN/m and k₂ = 30 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 5 kN/mk2 = 30 kN/mk3 = 80 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 14.33 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 36/3.6 = 10 m/s

Reaction distance

d1 = v₀·tr = 10·0.6 = 6 m

Braking distance

d2 = v₀²/(2a) = 10²/(2·6) = 8.333 m

Total

d = 6 + 8.333 = 14.33 m

Answer

d = 14.33 m
2.Kinematics

Answer: s = 432 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Top speed

v = a1·t1 = 3·9 = 27 m/s

Distance of each phase

s1 = ½·3·9² = 121.5 m
s2 = 27·7 = 189 m
s3 = 27²/(2·3) = 121.5 m

Total distance

s = 121.5 + 189 + 121.5 = 432 m

Answer

s = 432 m
3.Newton’s laws

Answer: a = 3.631 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 30° − 0.15·cos 30°) = 9.81·(0.5 − 0.1299) = 3.631 m/s²

Answer

a = 3.631 m/s²
4.Newton’s laws

Answer: a = 7.63 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (34.34 − 0)/4.5 = 7.63 m/s²

Answer

a = 7.63 m/s²
5.Projectile motion

Answer: θ = 31.5 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·105/34² = 0.891

Angle

2θ = 63.01° → θ = 31.5°

Answer

θ = 31.5°

The other solution is 90° − θ = 58.5°.

6.Projectile motion

Answer: t = 3.659 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 17·cos 35° = 13.93 m/s
vy = v0·sin θ = 17·sin 35° = 9.751 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 30 + 9.751·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (9.751 + √(95.08 + 588.6))/9.81 = 3.659 s

Answer

t = 3.659 s
7.Circular motion

Answer: vmax = 28.71 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·120) = 28.71 m/s

Answer

vmax = 28.71 m/s (103.3 km/h)
8.Circular motion

Answer: vmax = 33.07 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points down the slope.

N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g

Speed

v = √(140·9.81·0.6299/0.791) = 33.07 m/s

Answer

vmax = 33.07 m/s
(119.1 km/h)
9.Work & energy

Answer: P = 27.49 kW

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.

Driving force

m·g = 1500·9.81 = 14715 N
mg·sin θ = 14715·sin 5° = 1282 N
F = 1282 + 550 = 1832 N

Power

v = 54/3.6 = 15 m/s
P = F·v = 1832·15 = 27487 W = 27.49 kW

Answer

P = 27.49 kW
10.Work & energy

Answer: x = 29.38 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 19.62·(3 − 0.2·4) = 43.16 J

Maximum compression

½kx² = 43.16 → x = √(2·43.16/1000) = 0.2938 m = 29.38 cm

Answer

x = 29.38 cm
11.Momentum & collisions

Answer: v′2 = 3.6 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (4.5 − 0.5)/(4.5 + 0.5)·2 = 1.6 m/s
v′2 = 2·4.5/(4.5 + 0.5)·2 = 3.6 m/s

Answer

v′2 = 3.6 m/s
12.Momentum & collisions

Answer: Favg = 467.5 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.55·(6 + 28) = 18.7 N·s

Average force

Favg = J/Δt = 18.7/0.04 = 467.5 N

Answer

Favg = 467.5 N
13.Rigid-body rotation

Answer: v = 6.558 m/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 + mball·g·L = 6·9.81·0.95 + 4.5·9.81·1.9 = 139.8 J

Moment of inertia about the pin

IO = m·L²/3 + mball·L² = 7.22 + 16.24 = 23.46 kg·m²

Energy balance

½·IO·ω² = 139.8 → ω = √(2·139.8/23.46) = 3.452 rad/s
v = ω·L = 3.452·1.9 = 6.558 m/s

Answer

v = 6.558 m/s
14.Rigid-body rotation

Answer: ω = 2.298 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 5·2²/3 + 0.035·1² = 6.702 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.035·440·1/6.702 = 2.298 rad/s

Answer

ω = 2.298 rad/s
15.Gears & gear trains

Answer: n2 = 430.6 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1450·150/500 = 435 rpm

With slip

n2 = 435·0.99 = 430.6 rpm

Answer

n2 = 430.6 rpm
16.Gears & gear trains

Answer: nout = 270 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1440·48/80 = 864 rpm = nC

Second stage

nout = 864·25/80 = 270 rpm

Answer

nout = 270 rpm

total ratio = 5.333 : 1

17.Springs & pendulums

Answer: L = 0.6361 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(1.6/2π)² = 0.6361 m

Answer

L = 0.6361 m
18.Springs & pendulums

Answer: E = 0.726 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(120/0.9) = 11.55 rad/s

Energy

E = ½·k·A² = ½·120·0.11² = 0.726 J

Answer

E = 0.726 J
19.Mechanical vibrations

Answer: ζ = 0.05997

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/2)·ln(20/9.4) = 0.3775

Damping ratio

ζ = δ/√(4π² + δ²) = 0.3775/√(39.48 + 0.1425) = 0.05997

Answer

ζ = 0.05997
20.Mechanical vibrations

Answer: fn = 2.483 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 5 + 30 = 35 kN/m
keq = 35·80/(35 + 80) = 24.35 kN/m

Natural frequency

ωn = √(24348/100) = 15.6 rad/s
fn = 15.6/(2π) = 2.483 Hz

Answer

fn = 2.483 Hz

ExamProblems · examproblems.com/courses/dynamics