Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 6 m/s²car30 m/s

A car speeding at a constant 30 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 6 m/s². How long does it take the police car to catch up? Find t.

vcar = 30 m/sapolice = 6 m/s²v0,police = 0
t = s
2.KinematicsHard
v₀ = 13 m/s5 m

A ball is thrown straight up at 13 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 13 m/sh₀ = 5 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
boxv₀ = 7.5 m/sμ = ?

A box slides across a level floor with an initial speed of 7.5 m/s and comes to rest after 9.6 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 7.5 m/sd = 9.6 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
1 kg4 kgTF = 55 Nμ = 0.2

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 55 N pulls the front 4 kg block; the 1 kg block is towed behind. The coefficient of kinetic friction is 0.2 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 1 kgm2 = 4 kgF = 55 Nμ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 32 m/sθ = ?R = 80 m

A ball is launched from level ground at 32 m/s and must land 80 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 32 m/sR = 80 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 45 mv0​ = 32 m/s45°range

A ball is launched at 45° above horizontal from the top of a 45 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 32 m/sθ = 45°h = 45 mg = 9.81 m/s²
t = s
7.Circular motionMedium
L = 0.8 m60°

A small ball on a string of length 0.8 m moves in a horizontal circle so that the string makes a constant angle of 60° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the speed v of the ball.

L = 0.8 mθ = 60°g = 9.81 m/s²
v = m/s
8.Circular motionHard
r = 1.3 mv = 7 m/s

A 0.9 kg ball on a string 1.3 m long is swung in a vertical circle. At the lowest point it moves at 7 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 0.9 kgr = 1.3 mv = 7 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
40°d = 4 mμ = 0.35

A block slides from rest down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.35. Find its speed v after it has slid 4 m along the slope.

θ = 40°μ = 0.35d = 4 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
4 kg5 kgμ = 0.4d = 1.5 m

A 4 kg block rests on a rough horizontal table (μ = 0.4). A light string runs from it over a smooth pulley at the edge of the table to a hanging 5 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 1.5 m.

m1 = 4 kgm2 = 5 kgμ = 0.4d = 1.5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
900 kg8 m/s1600 kg

A 900 kg car moving at 8 m/s runs into a stationary 1600 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 900 kgv1 = 8 m/sm2 = 1600 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
13 m/s17 m/s

A 0.4 kg ball hits a wall at 13 m/s and bounces straight back at 17 m/s. The contact lasts 5 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.4 kgvin = 13 m/svout = 17 m/sΔt = 5 ms
J = N·s
13.Rigid-body rotationMedium
6.5 kgaαM = 17.5 kgR = 0.3 m

A 6.5 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 17.5 kg and radius 0.3 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the speed v of the block after it has fallen 4 m.

m = 6.5 kgM = 17.5 kgR = 0.3 mg = 9.81 m/s²h = 4 m
v = m/s
14.Rigid-body rotationHard
10 m/sω

A solid cylinder of mass 19.5 kg rolls without slipping at 10 m/s. What percentage p of its total kinetic energy is rotational?

m = 19.5 kgv = 10 m/sI = ½·m·r²
p = %
15.Gears & gear trainsMedium
N1​ = 18N2​ = 40

A 3 kW motor running at 1450 rpm drives a pinion with 18 teeth, which meshes with a gear with 40 teeth. Ignore losses. Find the output torque T2 on the gear shaft.

P = 3 kWn1 = 1450 rpmN1 = 18N2 = 40η = 100%
T2 = N·m
16.Gears & gear trainsHard
A = 36B = 72C = 18D = 24

A 15 kW motor at 2900 rpm drives gear A (36 teeth), which meshes with gear B (72 teeth). Gear C (18 teeth) on the same shaft as B drives gear D (24 teeth) on the output shaft. Each gear mesh has an efficiency of 98%. Find the output torque Tout.

P = 15 kWnin = 2900 rpmA = 36B = 72C = 18D = 24ηmesh = 98%
Tout = N·m
17.Springs & pendulumsMedium
L = 2.8 m

A simple pendulum has a length of 2.8 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.8 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
3 kgk = 100 N/m400 m/s

A 15 g bullet moving at 400 m/s hits and stays in a 3 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 100 N/m. Find the amplitude A of the resulting oscillation in cm.

m = 15 gv = 400 m/sM = 3 kgk = 100 N/m
A = cm
19.Mechanical vibrationsMedium
tx12 mm5 cycles1 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 12 mm is followed 5 cycles later by a peak of 1 mm. Find the damping ratio ζ.

x0 = 12 mmx5 = 1 mmn = 5
ζ =
20.Mechanical vibrationsHard
k1​ = 100k2​ = 100m = 100 kg

A 100 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 100 kN/m and k₂ = 100 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 100 kgk1 = 100 kN/mk2 = 100 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: t = 10 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·30/6 = 10 s

Answer

t = 10 s

At that moment the police car moves at 2v = 60 m/s.

2.Kinematics

Answer: t = 2.991 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−5 = 13·t − ½·9.81·t²
4.905·t² − 13·t − 5 = 0

Solve the quadratic

Only the positive root is physical.

t = (13 + √(13² + 2·9.81·5))/9.81 = 2.991 s

Answer

t = 2.991 s
3.Newton’s laws

Answer: μ = 0.2986

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 7.5²/(2·9.6) = 2.93 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 2.93/9.81 = 0.2986

Answer

μ = 0.2986
4.Newton’s laws

Answer: T = 11 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (55 − 9.81)/5 = 9.038 m/s²

Rear block alone

T = m1·(a + μ·g) = 1·(9.038 + 1.962) = 11 N

Answer

T = 11 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: θ = 25.02 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·80/32² = 0.7664

Angle

2θ = 50.03° → θ = 25.02°

Answer

θ = 25.02°

The other solution is 90° − θ = 64.98°.

6.Projectile motion

Answer: t = 6.114 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 32·cos 45° = 22.63 m/s
vy = v0·sin θ = 32·sin 45° = 22.63 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 45 + 22.63·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (22.63 + √(512 + 882.9))/9.81 = 6.114 s

Answer

t = 6.114 s
7.Circular motion

Answer: v = 3.431 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 0.8·sin 60° = 0.6928 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(0.6928·9.81·tan 60°) = 3.431 m/s

Answer

v = 3.431 m/s
8.Circular motion

Answer: T = 42.75 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 0.9·9.81 + 0.9·7²/1.3 = 8.829 + 33.92 = 42.75 N

Answer

T = 42.75 N
9.Work & energy

Answer: v = 5.423 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·4·(0.6428 − 0.35·0.766)) = 5.423 m/s

Answer

v = 5.423 m/s
10.Work & energy

Answer: v = 3.334 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 49.05·1.5 = 73.58 J
μ·m₁g·d = 0.4·39.24·1.5 = 23.54 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 50.03 → v = √(2·50.03/9) = 3.334 m/s

Answer

v = 3.334 m/s
11.Momentum & collisions

Answer: ΔK = 18432 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 900·8/2500 = 2.88 m/s

Kinetic energy before and after

Kbefore = ½·900·8² = 28800 J
Kafter = ½·2500·2.88² = 10368 J

Energy lost

ΔK = 28800 − 10368 = 18432 J

Answer

ΔK = 18432 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: J = 12 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.4·(17 + 13) = 12 N·s

Answer

J = 12 N·s
13.Rigid-body rotation

Answer: v = 5.784 m/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Block and pulley

block: m·g − T = m·a
pulley: T·R = I·α = ½·M·R²·(a/R) → T = ½·M·a

Acceleration

a = m·g/(m + M/2) = 6.5·9.81/(6.5 + 8.75) = 4.181 m/s²

Speed after the drop

v = √(2·a·h) = √(2·4.181·4) = 5.784 m/s

Answer

v = 5.784 m/s
14.Rigid-body rotation

Answer: p = 33.33 %

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·19.5·10² = 975 J
Erot = ½·I·ω² = ½·0.5·m·r²·(v/r)² = 0.5·975 = 487.5 J

Rotational share

p = 487.5/1463·100% = c/(1 + c)·100% = 33.33%

Answer

p = 33.33 %

The share depends only on the shape, not on the mass or the speed.

15.Gears & gear trains

Answer: T2 = 43.9 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1450/60 = 151.8 rad/s
T1 = P/ω₁ = 3000/151.8 = 19.76 N·m

Output torque

T2 = 19.76·40/18·1 = 43.9 N·m

Answer

T2 = 43.9 N·m
16.Gears & gear trains

Answer: Tout = 126.5 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 2900·(36/72)·(18/24) = 1088 rpm
ωout = 2π·1088/60 = 113.9 rad/s

Output power and torque

Pout = 15000·0.98² = 14406 W
Tout = Pout/ωout = 14406/113.9 = 126.5 N·m

Answer

Tout = 126.5 N·m
17.Springs & pendulums

Answer: T = 3.357 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.8/9.81) = 3.357 s

Answer

T = 3.357 s
18.Springs & pendulums

Answer: A = 34.55 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Speed after impact

V = m·v/(m + M) = 0.015·400/3.015 = 1.99 m/s

Angular frequency

ω = √(k/(m + M)) = √(100/3.015) = 5.759 rad/s

Amplitude

A = V/ω = 1.99/5.759 = 0.3455 m = 34.55 cm

Answer

A = 34.55 cm
19.Mechanical vibrations

Answer: ζ = 0.07885

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/5)·ln(12/1) = 0.497

Damping ratio

ζ = δ/√(4π² + δ²) = 0.497/√(39.48 + 0.247) = 0.07885

Answer

ζ = 0.07885
20.Mechanical vibrations

Answer: keq = 200 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 100 + 100 = 200 kN/m

Answer

keq = 200 kN/m

ExamProblems · examproblems.com/courses/dynamics