Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)4.444 s20

A car driving at 72 km/h brakes with a constant deceleration of 4.5 m/s² until it stops. Find the braking distance s.

v₀ = 72 km/ha = −4.5 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 12 m/s15 m

A ball is thrown straight up at 12 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 12 m/sh₀ = 15 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 25°a = ?m = 20 kg

A 20 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 20 kgθ = 25°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 9 kg7 kgθ = 20°

A 9 kg block on a ramp at 20° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 7 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.15. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 9 kgm2 = 7 kgθ = 20°μ = 0.15g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 34 m/s70°rangeH = ?

A ball is launched at 70° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 34 m/sθ = 70°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 15 mv0​ = 23 m/s45°α = ?

A ball is launched at 23 m/s and 45° above the horizontal from the top of a 15 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 23 m/sθ = 45°h = 15 mg = 9.81 m/s²
α = °
7.Circular motionMedium
r = 55 mvmax​ = ?

A car takes a flat curve of radius 55 m. The coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 55 mμs = 0.4g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 6 mh = ?

A small cart is released from rest on a frictionless track and runs into a vertical loop of radius 6 m. From what minimum height hmin above the bottom of the loop must it start to stay on the track at the top of the loop?

R = 6 mv₀ = 0
hmin = m
9.Work & energyMedium
45°d = 17 mμ = 0.35

A 4 kg block slides 17 m down a slope at 45° to the horizontal, with a coefficient of kinetic friction of 0.35. Find the work Wf done against friction.

m = 4 kgθ = 45°μ = 0.35d = 17 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
3 kg3 kgμ = 0.25d = 2.5 m

A 3 kg block rests on a rough horizontal table (μ = 0.25). A light string runs from it over a smooth pulley at the edge of the table to a hanging 3 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 2.5 m.

m1 = 3 kgm2 = 3 kgμ = 0.25d = 2.5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
1 kg12 m/s0.5 kg

A 1 kg glider moving at 12 m/s makes a perfectly elastic head-on collision with a 0.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 1 kgm2 = 0.5 kgv1 = 12 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
1900 kgv1​ = ?1500 kg

A 1900 kg car runs into a parked 1500 kg car. The wrecks lock together and skid 19.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.8. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 1900 kgm2 = 1500 kgd = 19.5 mμ = 0.8g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
0 → 2500 rpmI = 30.5 kg·m²

A motor brings a flywheel with a moment of inertia of 30.5 kg·m² from rest up to 2500 rpm in 53 s. Ignoring losses, find the average power Pavg it delivers, in kW.

I = 30.5 kg·m²n = 2500 rpmt = 53 s
Pavg = kW
14.Rigid-body rotationHard
θ = 20°a

A thin hoop rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². Find the smallest coefficient of static friction μs that prevents it from slipping.

θ = 20°I = m·r²g = 9.81 m/s²
μs =
15.Gears & gear trainsMedium
d1​ = 100 mmd2​ = 400 mm1450 rpmn2​ = ?

A 100 mm pulley at 1450 rpm drives a 400 mm pulley by a belt with 3 % slip. Find the speed n2 of the driven pulley.

n1 = 1450 rpmd1 = 100 mmd2 = 400 mms = 3 %
n2 = rpm
16.Gears & gear trainsHard
d1​ = 100 mmd2​ = 250 mm1450 rpmC = 1000 mmT1​ = 600 NT2​P = ?

An open belt connects a 100 mm driving pulley at 1450 rpm to a 250 mm pulley; the centres are 1000 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 600 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 100 mmn1 = 1450 rpmd2 = 250 mmC = 1000 mmμ = 0.25T1 = 600 N
P = kW
17.Springs & pendulumsMedium
3.8 kgk = 70 N/mA = 5 cmx = 4 cm

A 3.8 kg mass on a spring with k = 70 N/m oscillates on a frictionless surface with an amplitude of 5 cm. Find its speed v when it is 4 cm from equilibrium.

m = 3.8 kgk = 70 N/mA = 5 cmx = 4 cm
v = m/s
18.Springs & pendulumsHard
1.6 kgk = 470 N/mA = 16 cm

A 1.6 kg mass on a spring with k = 470 N/m is pulled 16 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 1.6 kgk = 470 N/mA = 16 cm
E = J
19.Mechanical vibrationsMedium
k = 150 kN/mζ = 0.45m = 100 kg

A 100 kg mass on a spring with a stiffness of 150 kN/m has a viscous damper giving a damping ratio of 0.45. Find the damped natural frequency fd of its free vibration in Hz.

m = 100 kgk = 150 kN/mζ = 0.45
fd = Hz
20.Mechanical vibrationsHard
k1​ = 60k2​ = 80k3​ = 25m = 100 kg

A 100 kg mass hangs from spring k₃ = 25 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 60 kN/m and k₂ = 80 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 60 kN/mk2 = 80 kN/mk3 = 25 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 44.44 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 72/3.6 = 20 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 20²/(2·4.5) = 44.44 m

Answer

s = 44.44 m
2.Kinematics

Answer: t = 3.357 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−15 = 12·t − ½·9.81·t²
4.905·t² − 12·t − 15 = 0

Solve the quadratic

Only the positive root is physical.

t = (12 + √(12² + 2·9.81·15))/9.81 = 3.357 s

Answer

t = 3.357 s
3.Newton’s laws

Answer: a = 3.257 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 25° − 0.1·cos 25°) = 9.81·(0.4226 − 0.09063) = 3.257 m/s²

Answer

a = 3.257 m/s²
4.Newton’s laws

Answer: T = 57.28 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 68.67 N
m₁·g·sin θ = 30.2 N
μ·m₁·g·cos θ = 12.44 N

Acceleration of the system

a = (68.67 − 30.2 − 12.44)/16 = 1.627 m/s²

Tension from the hanging mass

m2·g − T = m2·a → T = 7·(9.81 − 1.627) = 57.28 N

Answer

T = 57.28 N
5.Projectile motion

Answer: H = 52.03 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 34·cos 70° = 11.63 m/s
vy = v0·sin θ = 34·sin 70° = 31.95 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 31.95²/(2·9.81) = 52.03 m

Answer

H = 52.03 m
6.Projectile motion

Answer: α = 55.47 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 23·cos 45° = 16.26 m/s
vy0 = 23·sin 45° = 16.26 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(16.26² + 2·9.81·15) = 23.64 m/s

Impact angle

tan α = vy/vx = 23.64/16.26 → α = 55.47°

Answer

α = 55.47°
7.Circular motion

Answer: vmax = 14.69 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.4·9.81·55) = 14.69 m/s

Answer

vmax = 14.69 m/s (52.89 km/h)
8.Circular motion

Answer: hmin = 15 m

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Condition at the top

m·g = m·v²/R → v² = g·R

Energy conservation

g·h = g·2R + ½·g·R → h = 2.5·R = 2.5·6 = 15 m

Answer

hmin = 15 m
9.Work & energy

Answer: Wf = 165.1 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 39.24·0.7071 = 27.75 N
F = μN = 0.35·27.75 = 9.711 N

Work against friction

Wf = F·d = 9.711·17 = 165.1 J

Answer

Wf = 165.1 J
10.Work & energy

Answer: v = 4.289 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 29.43·2.5 = 73.58 J
μ·m₁g·d = 0.25·29.43·2.5 = 18.39 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 55.18 → v = √(2·55.18/6) = 4.289 m/s

Answer

v = 4.289 m/s
11.Momentum & collisions

Answer: v′2 = 16 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1 − 0.5)/(1 + 0.5)·12 = 4 m/s
v′2 = 2·1/(1 + 0.5)·12 = 16 m/s

Answer

v′2 = 16 m/s
12.Momentum & collisions

Answer: v1 = 31.31 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.8·9.81·19.5) = 17.49 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 3400·17.49/1900 = 31.31 m/s

Answer

v1 = 31.31 m/s
(112.7 km/h)
13.Rigid-body rotation

Answer: Pavg = 19.72 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·2500/60 = 261.8 rad/s

Energy

E = ½·I·ω² = ½·30.5·261.8² = 1.045 × 10⁶ J

Average power

Pavg = E/t = 1.045 × 10⁶/53 = 19721 W = 19.72 kW

Answer

Pavg = 19.72 kW
14.Rigid-body rotation

Answer: μs = 0.182

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 1·m·r²·(a/r) → f = 1·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 20°/2 = 1.678 m/s²

Friction needed

f = c·m·a ≤ μ·m·g·cos θ → μ ≥ c·tan θ/(1 + c)
μs = 1·tan 20°/2 = 0.182

Answer

μs = 0.182
15.Gears & gear trains

Answer: n2 = 351.6 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1450·100/400 = 362.5 rpm

With slip

n2 = 362.5·0.97 = 351.6 rpm

Answer

n2 = 351.6 rpm
16.Gears & gear trains

Answer: P = 2.399 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.991 rad

Slack-side tension

eμθ = e0.7479 = 2.112, T₂ = 600/2.112 = 284 N

Power

P = (600 − 284)·7.592 = 2.399 kW

Answer

P = 2.399 kW
17.Springs & pendulums

Answer: v = 0.1288 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(70/3.8) = 4.292 rad/s

Speed at x

v = ω·√(A² − x²) = 4.292·√(0.05² − 0.04²) = 0.1288 m/s

Answer

v = 0.1288 m/s
18.Springs & pendulums

Answer: E = 6.016 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(470/1.6) = 17.14 rad/s

Energy

E = ½·k·A² = ½·470·0.16² = 6.016 J

Answer

E = 6.016 J
19.Mechanical vibrations

Answer: fd = 5.505 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(150000/100) = 38.73 rad/s
fn = 38.73/(2π) = 6.164 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 6.164·√(1 − 0.45²) = 5.505 Hz

Answer

fd = 5.505 Hz
20.Mechanical vibrations

Answer: fn = 2.318 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 60 + 80 = 140 kN/m
keq = 140·25/(140 + 25) = 21.21 kN/m

Natural frequency

ωn = √(21212/100) = 14.56 rad/s
fn = 14.56/(2π) = 2.318 Hz

Answer

fn = 2.318 Hz

ExamProblems · examproblems.com/courses/dynamics