Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?20

A car driving at 72 km/h brakes with a constant deceleration of 4.5 m/s² until it stops. How long does braking take? Find t.

v₀ = 72 km/ha = −4.5 m/s²v = 0
t = s
2.KinematicsHard
v₀ = 14 m/s10 m

A ball is thrown straight up at 14 m/s from the edge of a roof 10 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 14 m/sh₀ = 10 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 45°a = ?m = 12 kg

A 12 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 12 kgθ = 45°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 5.5 kg4.5 kgθ = 35°

A 5.5 kg block on a ramp at 35° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 4.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.1. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 5.5 kgm2 = 4.5 kgθ = 35°μ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 20 m/sθ = ?R = 25 m

A ball is launched from level ground at 20 m/s and must land 25 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 20 m/sR = 25 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 15 mv0​ = 35 m/s60°v = ?

A ball is launched at 35 m/s and 60° above the horizontal from the top of a 15 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the speed v with which it hits the ground.

v₀ = 35 m/sθ = 60°h = 15 mg = 9.81 m/s²
v = m/s
7.Circular motionMedium
r = 80 mvmax​ = ?

A car takes a flat curve of radius 80 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 80 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.8 mv = ?

A ball on a string 0.8 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 0.8 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
20°d = 3 mμ = 0.25

A block slides from rest down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.25. Find its speed v after it has slid 3 m along the slope.

θ = 20°μ = 0.25d = 3 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
F = 90 N20°μ = 0.1515 kg

A 15 kg block starts from rest at the bottom of a 20° slope and is pulled up the slope by a constant force of 90 N parallel to the slope. The coefficient of kinetic friction is 0.15. Find the speed v of the block after it has moved 8 m up the slope.

m = 15 kgF = 90 Nθ = 20°μ = 0.15d = 8 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
2 kg7 m/s4.5 kg

A 2 kg glider moving at 7 m/s makes a perfectly elastic head-on collision with a 4.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 2 kgm2 = 4.5 kgv1 = 7 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
10 m/s7 m/s

A 0.5 kg ball hits a wall at 10 m/s and bounces straight back at 7 m/s. The contact lasts 5 ms. Find the average force Favg of the wall on the ball.

m = 0.5 kgvin = 10 m/svout = 7 m/sΔt = 5 ms
Favg = N
13.Rigid-body rotationMedium
L = 2.6 mm = 19 kgα

A uniform slender rod of mass 19 kg and length 2.6 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 19 kgL = 2.6 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
disc: 7 kgring: 15 kgn1​ = 1100 rpm

A uniform solid disc (mass 7 kg, radius 0.2 m) spins freely at 1100 rpm about a vertical frictionless shaft. A thin ring of mass 15 kg and the same radius is dropped onto it from rest, centred on the shaft, and the two quickly spin together. How much kinetic energy ΔE is lost in the process?

Mdisc = 7 kgMring = 15 kgR = 0.2 mn1 = 1100 rpm
ΔE = J
15.Gears & gear trainsMedium
Tw​ = ?z = 4, 2900 rpm

A 1.1 kW motor at 2900 rpm drives a worm with 4 start(s). The worm wheel has 36 teeth and the drive has an efficiency of 75%. Find the output torque Tw on the wheel shaft.

z = 4Nw = 36n = 2900 rpmP = 1.1 kWη = 75%
Tw = N·m
16.Gears & gear trainsHard
d1​ = 125 mmd2​ = 250 mm960 rpmC = 1200 mmθ = ?

An open belt connects a 125 mm pulley and a 250 mm pulley whose centres are 1200 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 125 mmd2 = 250 mmC = 1200 mm
θ = °
17.Springs & pendulumsMedium
L = 2.5 m

A simple pendulum has a length of 2.5 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.5 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
1.8 kgk = 140 N/mA = 6 cm

A 1.8 kg mass on a spring with k = 140 N/m is pulled 6 cm from equilibrium and released. Find its maximum acceleration amax.

m = 1.8 kgk = 140 N/mA = 6 cm
amax = m/s²
19.Mechanical vibrationsMedium
k = 200 kN/mζ = 0.4m = 25 kg

A 25 kg mass on a spring with a stiffness of 200 kN/m has a viscous damper giving a damping ratio of 0.4. Find the damped natural frequency fd of its free vibration in Hz.

m = 25 kgk = 200 kN/mζ = 0.4
fd = Hz
20.Mechanical vibrationsHard
k1​ = 30k2​ = 5m = 40 kg

A 40 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 30 kN/m and the lower one k₂ = 5 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 40 kgk1 = 30 kN/mk2 = 5 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: t = 4.444 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 72/3.6 = 20 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 20/4.5 = 4.444 s

Answer

t = 4.444 s
2.Kinematics

Answer: hmax = 19.99 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 14²/(2·9.81) = 9.99 m

Height above the ground

hmax = 10 + 9.99 = 19.99 m

Answer

hmax = 19.99 m
3.Newton’s laws

Answer: a = 5.549 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 45° − 0.2·cos 45°) = 9.81·(0.7071 − 0.1414) = 5.549 m/s²

Answer

a = 5.549 m/s²
4.Newton’s laws

Answer: T = 40.19 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 44.15 N
m₁·g·sin θ = 30.95 N
μ·m₁·g·cos θ = 4.42 N

Acceleration of the system

a = (44.15 − 30.95 − 4.42)/10 = 0.8778 m/s²

Tension from the hanging mass

m2·g − T = m2·a → T = 4.5·(9.81 − 0.8778) = 40.19 N

Answer

T = 40.19 N
5.Projectile motion

Answer: θ = 18.91 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·25/20² = 0.6131

Angle

2θ = 37.82° → θ = 18.91°

Answer

θ = 18.91°

The other solution is 90° − θ = 71.09°.

6.Projectile motion

Answer: v = 38.98 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 35·cos 60° = 17.5 m/s
vy0 = 35·sin 60° = 30.31 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(30.31² + 2·9.81·15) = 34.83 m/s

Impact speed

v = √(17.5² + 34.83²) = 38.98 m/s

Answer

v = 38.98 m/s

Check with energy: v² = v₀² + 2gh.

7.Circular motion

Answer: vmax = 19.81 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·80) = 19.81 m/s

Answer

vmax = 19.81 m/s (71.31 km/h)
8.Circular motion

Answer: vmin = 2.801 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·0.8) = 2.801 m/s

Answer

vmin = 2.801 m/s
9.Work & energy

Answer: v = 2.511 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·3·(0.342 − 0.25·0.9397)) = 2.511 m/s

Answer

v = 2.511 m/s
10.Work & energy

Answer: v = 4.494 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 15·9.81 = 147.2 N
mg·sin θ = 50.33 N
μ·mg·cos θ = 20.74 N

Work–energy

½mv² = (90 − 71.07)·8 = 151.4 J
v = √(2·151.4/15) = 4.494 m/s

Answer

v = 4.494 m/s
11.Momentum & collisions

Answer: v′1 = −2.692 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (2 − 4.5)/(2 + 4.5)·7 = −2.692 m/s
v′2 = 2·2/(2 + 4.5)·7 = 4.308 m/s

Answer

v′1 = −2.692 m/s

The minus sign means the first glider bounces back.

12.Momentum & collisions

Answer: Favg = 1700 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.5·(7 + 10) = 8.5 N·s

Average force

Favg = J/Δt = 8.5/0.005 = 1700 N

Answer

Favg = 1700 N
13.Rigid-body rotation

Answer: R = 46.6 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.6) = 5.66 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 19·(9.81 − 7.357) = 46.6 N

Answer

R = 46.6 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: ΔE = 753.1 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = ½·7·0.2² = 0.14 kg·m²
I2 = 15·0.2² = 0.6 kg·m²

Conservation of angular momentum

n2 = n1·I1/(I1 + I2) = 1100·0.14/0.74 = 208.1 rpm

Kinetic energy before and after

E1 = ½·0.14·115.2² = 928.8 J
E2 = ½·0.74·21.79² = 175.7 J
ΔE = 928.8 − 175.7 = 753.1 J

Answer

ΔE = 753.1 J
15.Gears & gear trains

Answer: Tw = 24.45 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 2900·4/36 = 322.2 rpm

Output torque

ωw = 2π·322.2/60 = 33.74 rad/s
Tw = η·P/ωw = 0.75·1100/33.74 = 24.45 N·m

Answer

Tw = 24.45 N·m
16.Gears & gear trains

Answer: θ = 174 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.05208) = 2.986°

Angle of wrap

θ = 180 − 2·2.986 = 174°

Answer

θ = 174°
17.Springs & pendulums

Answer: T = 3.172 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.5/9.81) = 3.172 s

Answer

T = 3.172 s
18.Springs & pendulums

Answer: amax = 4.667 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(140/1.8) = 8.819 rad/s

Maximum acceleration

amax = A·ω² = 0.06·8.819² = 4.667 m/s²

Answer

amax = 4.667 m/s²
19.Mechanical vibrations

Answer: fd = 13.05 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(200000/25) = 89.44 rad/s
fn = 89.44/(2π) = 14.24 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 14.24·√(1 − 0.4²) = 13.05 Hz

Answer

fd = 13.05 Hz
20.Mechanical vibrations

Answer: keq = 4.286 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/30 + 1/5 → keq = 30·5/(30 + 5) = 4.286 kN/m

Answer

keq = 4.286 kN/m

ExamProblems · examproblems.com/courses/dynamics