Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?33.33

A car driving at 120 km/h brakes with a constant deceleration of 4.5 m/s² until it stops. How long does braking take? Find t.

v₀ = 120 km/ha = −4.5 m/s²v = 0
t = s
2.KinematicsHard
a = 28 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 28 m/s² for 3 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 28 m/s²t1 = 3 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 20°45 kgF = ?

A 45 kg box is pushed up a ramp at 20° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the pushing force F.

m = 45 kgθ = 20°μ = 0.25g = 9.81 m/s²
F = N
4.Newton’s lawsHard
m1​ = 3.5 kg2 kgno friction

A 3.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 2 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 3.5 kgm2 = 2 kgμ = 0g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = ?35°R = 25 m

A ball is launched from level ground at 35° above the horizontal and lands 25 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 35°R = 25 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 35 mv0​ = 28 m/s55°x = ?

A ball is launched at 55° above horizontal from the top of a 35 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 28 m/sθ = 55°h = 35 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 45 mvmax​ = ?

A car takes a flat curve of radius 45 m. The coefficient of static friction between tyres and road is 0.3. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 45 mμs = 0.3g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.5 mv = 3.5 m/s

A 1.4 kg ball on a string 1.5 m long is swung in a vertical circle. At the lowest point it moves at 3.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.4 kgr = 1.5 mv = 3.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
35°d = 3 mμ = 0.25

A block slides from rest down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.25. Find its speed v after it has slid 3 m along the slope.

θ = 35°μ = 0.25d = 3 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
k = 1000 N/m30°μ = 0.150.5 kg

A spring of stiffness 1000 N/m at the bottom of a 30° slope is compressed by 12 cm against a 0.5 kg block and released. The coefficient of kinetic friction between block and slope is 0.15. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)

m = 0.5 kgk = 1000 N/mx = 12 cmθ = 30°μ = 0.15g = 9.81 m/s²
d = m
11.Momentum & collisionsMedium
2 kgv = ?8 gh = 10 cm

An 8 g bullet is fired horizontally into a 2 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 10 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 8 gM = 2 kgh = 10 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
2000 kg12 m/s900 kg17 m/sθ = ?

At a crossing a 2000 kg car travelling east at 12 m/s collides with a 900 kg car travelling north at 17 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.

m1 = 2000 kgv1 = 12 m/s (E)m2 = 900 kgv2 = 17 m/s (N)
θ = °
13.Rigid-body rotationMedium
ω = ?2.5 kgL = 1.8 mm = 4 kg

A uniform slender rod of mass 4 kg and length 1.8 m is pinned at one end and released from rest in a horizontal position. A small ball of mass 2.5 kg is fixed to its free end. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.

m = 4 kgL = 1.8 mmball = 2.5 kgg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
θ = 35°vs = 3 m

A hollow sphere starts from rest and rolls without slipping down a slope inclined at 35° to the horizontal. Use g = 9.81 m/s². Its radius is 0.35 m. Find its angular velocity ω after it has rolled 3 m along the slope.

θ = 35°s = 3 mI = (2/3)·m·r²g = 9.81 m/s²r = 0.35 m
ω = rad/s
15.Gears & gear trainsMedium
N1​ = ?N2​

Two parallel shafts are 168 mm apart. They must be connected by a pair of spur gears with a module of 4 mm and a speed reduction of 2.5 : 1. How many teeth N1 must the pinion have?

a = 168 mmm = 4 mmi = 2.5
N1 =
16.Gears & gear trainsHard
A = 15B = 48C = 24D = 60

A 15 kW motor at 2900 rpm drives gear A (15 teeth), which meshes with gear B (48 teeth). Gear C (24 teeth) on the same shaft as B drives gear D (60 teeth) on the output shaft. Each gear mesh has an efficiency of 97%. Find the output torque Tout.

P = 15 kWnin = 2900 rpmA = 15B = 48C = 24D = 60ηmesh = 97%
Tout = N·m
17.Springs & pendulumsMedium
0.4 kgk = 440 N/mA = 12 cmx = 2 cm

A 0.4 kg mass on a spring with k = 440 N/m oscillates on a frictionless surface with an amplitude of 12 cm. Find its speed v when it is 2 cm from equilibrium.

m = 0.4 kgk = 440 N/mA = 12 cmx = 2 cm
v = m/s
18.Springs & pendulumsHard
2.8 kgk = 380 N/m

A 2.8 kg mass is attached to the lower end of an unstretched vertical spring with k = 380 N/m and released from rest. Use g = 9.81 m/s². Find the greatest speed vmax of the mass.

m = 2.8 kgk = 380 N/mg = 9.81 m/s²
vmax = m/s
19.Mechanical vibrationsMedium
k = 5 kN/mζ = 0.7m = 40 kg

A 40 kg mass on a spring with a stiffness of 5 kN/m has a viscous damper giving a damping ratio of 0.7. Find the damped natural frequency fd of its free vibration in Hz.

m = 40 kgk = 5 kN/mζ = 0.7
fd = Hz
20.Mechanical vibrationsHard
k1​ = 80k2​ = 40m = 100 kg

A 100 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 80 kN/m and k₂ = 40 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 80 kN/mk2 = 40 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 7.407 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 120/3.6 = 33.33 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 33.33/4.5 = 7.407 s

Answer

t = 7.407 s
2.Kinematics

Answer: hmax = 485.6 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 28·3 = 84 m/s
h₁ = ½·28·3² = 126 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 84²/(2·9.81) = 359.6 m
hmax = 126 + 359.6 = 485.6 m

Answer

hmax = 485.6 m
3.Newton’s laws

Answer: F = 254.7 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Constant speed: the forces balance.

F = m·g·sin θ + μ·m·g·cos θ

Pushing force

F = 151 + 103.7 = 254.7 N

Answer

F = 254.7 N
4.Newton’s laws

Answer: T = 12.49 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (19.62 − 0)/5.5 = 3.567 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 3.5·3.567 + 0 = 12.49 N

Answer

T = 12.49 N
5.Projectile motion

Answer: v0 = 16.16 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·25/sin 70°) = 16.16 m/s

Answer

v0 = 16.16 m/s
6.Projectile motion

Answer: x = 94.56 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 28·cos 55° = 16.06 m/s
vy = v0·sin θ = 28·sin 55° = 22.94 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 35 + 22.94·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (22.94 + √(526.1 + 686.7))/9.81 = 5.888 s

Horizontal distance

x = vx·t = 16.06·5.888 = 94.56 m

Answer

x = 94.56 m
7.Circular motion

Answer: vmax = 11.51 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.3·9.81·45) = 11.51 m/s

Answer

vmax = 11.51 m/s (41.43 km/h)
8.Circular motion

Answer: T = 25.17 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.4·9.81 + 1.4·3.5²/1.5 = 13.73 + 11.43 = 25.17 N

Answer

T = 25.17 N
9.Work & energy

Answer: v = 4.659 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·3·(0.5736 − 0.25·0.8192)) = 4.659 m/s

Answer

v = 4.659 m/s
10.Work & energy

Answer: d = 2.33 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 12 cm = 0.12 m
½kx² = ½·1000·0.12² = 7.2 J

Energy balance along the slope

m·g = 0.5·9.81 = 4.905 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 7.2/(4.905·(0.5 + 0.15·0.866)) = 2.33 m

Answer

d = 2.33 m
11.Momentum & collisions

Answer: v = 351.6 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.1) = 1.401 m/s

Collision

m·v = (m + M)·V → v = (0.008 + 2)·1.401/0.008 = 351.6 m/s

Answer

v = 351.6 m/s
12.Momentum & collisions

Answer: θ = 32.52 °

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 2000·12 = 24000 kg·m/s
py = 900·17 = 15300 kg·m/s

Direction

tan θ = py/px = 0.6375 → θ = 32.52°

Answer

θ = 32.52°
13.Rigid-body rotation

Answer: ω = 3.577 rad/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 + mball·g·L = 4·9.81·0.9 + 2.5·9.81·1.8 = 79.46 J

Moment of inertia about the pin

IO = m·L²/3 + mball·L² = 4.32 + 8.1 = 12.42 kg·m²

Energy balance

½·IO·ω² = 79.46 → ω = √(2·79.46/12.42) = 3.577 rad/s

Answer

ω = 3.577 rad/s
14.Rigid-body rotation

Answer: ω = 12.86 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 3·sin 35° = 1.721 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.6667)
v = √(2·9.81·1.721/1.667) = 4.501 m/s
ω = v/r = 4.501/0.35 = 12.86 rad/s

Answer

ω = 12.86 rad/s
15.Gears & gear trains

Answer: N1 = 24

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·168/4 = 84

Split by the ratio

N1 = 84/(1 + 2.5) = 24

Answer

N1 = 24
16.Gears & gear trains

Answer: Tout = 371.8 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 2900·(15/48)·(24/60) = 362.5 rpm
ωout = 2π·362.5/60 = 37.96 rad/s

Output power and torque

Pout = 15000·0.97² = 14114 W
Tout = Pout/ωout = 14114/37.96 = 371.8 N·m

Answer

Tout = 371.8 N·m
17.Springs & pendulums

Answer: v = 3.924 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(440/0.4) = 33.17 rad/s

Speed at x

v = ω·√(A² − x²) = 33.17·√(0.12² − 0.02²) = 3.924 m/s

Answer

v = 3.924 m/s
18.Springs & pendulums

Answer: vmax = 0.8421 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 2.8·9.81/380 = 0.07228 m = A

Greatest speed

The speed is largest at equilibrium.

ω = √(380/2.8) = 11.65 rad/s
vmax = A·ω = 0.07228·11.65 = 0.8421 m/s

Answer

vmax = 0.8421 m/s
19.Mechanical vibrations

Answer: fd = 1.271 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(5000/40) = 11.18 rad/s
fn = 11.18/(2π) = 1.779 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 1.779·√(1 − 0.7²) = 1.271 Hz

Answer

fd = 1.271 Hz
20.Mechanical vibrations

Answer: fn = 5.513 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 80 + 40 = 120 kN/m

Natural frequency

ωn = √(120000/100) = 34.64 rad/s
fn = 34.64/(2π) = 5.513 Hz

Answer

fn = 5.513 Hz

ExamProblems · examproblems.com/courses/dynamics