Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?33.33

A car driving at 120 km/h brakes with a constant deceleration of 3 m/s² until it stops. How long does braking take? Find t.

v₀ = 120 km/ha = −3 m/s²v = 0
t = s
2.KinematicsHard
a = 26 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 26 m/s² for 1.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 26 m/s²t1 = 1.5 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 40°15 kgF = ?

A 15 kg box is pushed up a ramp at 40° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the pushing force F.

m = 15 kgθ = 40°μ = 0.15g = 9.81 m/s²
F = N
4.Newton’s lawsHard
m1​ = 1 kg8 kgθ = 25°

A 1 kg block on a ramp at 25° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 8 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.15. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 1 kgm2 = 8 kgθ = 25°μ = 0.15g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = ?65°R = 105 m

A ball is launched from level ground at 65° above the horizontal and lands 105 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 65°R = 105 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 55 mv0​ = 15 m/s55°x = ?

A ball is launched at 55° above horizontal from the top of a 55 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 15 m/sθ = 55°h = 55 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 50 mvmax​ = ?

A car takes a flat curve of radius 50 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 50 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.5 m11.5 m/svtop​ = ?

A 1.1 kg ball on a light string 1.5 m long is swung in a vertical circle. At the lowest point its speed is 11.5 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 1.1 kgr = 1.5 mvbottom = 11.5 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
70°L = 1 m5 kg

A 5 kg ball hangs on a light string of length 1 m. It is pulled aside until the string makes 70° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.

m = 5 kgL = 1 mθ = 70°g = 9.81 m/s²
T = N
10.Work & energyHard
h = 3.5 mL = 1 mμ = 0.25k = 500 N/m

A 1 kg block is released from rest at height 3.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1 m long (μ = 0.25) and then runs onto a spring (k = 500 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 1 kgh = 3.5 mL = 1 mμ = 0.25k = 500 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
4 kg10 m/s4.5 kg

A 4 kg glider moving at 10 m/s makes a perfectly elastic head-on collision with a 4.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 4 kgm2 = 4.5 kgv1 = 10 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
900 kgv1​ = ?1500 kg

A 900 kg car runs into a parked 1500 kg car. The wrecks lock together and skid 6.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 900 kgm2 = 1500 kgd = 6.5 mμ = 0.7g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
L = 0.9 mm = 10.5 kgα

A uniform slender rod of mass 10.5 kg and length 0.9 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the acceleration atip of the free end just after release.

m = 10.5 kgL = 0.9 mg = 9.81 m/s²
atip = m/s²
14.Rigid-body rotationHard
θ = 20°vs = 4.5 m

A thin hoop starts from rest and rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 4.5 m along the slope.

θ = 20°s = 4.5 mI = m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
N1​N2​ = ?

Two parallel shafts are 180 mm apart. They must be connected by a pair of spur gears with a module of 4 mm and a speed reduction of 3.5 : 1. How many teeth N2 must the gear have?

a = 180 mmm = 4 mmi = 3.5
N2 =
16.Gears & gear trainsHard
Ns​ = 24ring fixedNp​ = 15nc​ = ?

In a planetary gear set the sun gear has 24 teeth and each planet gear has 15 teeth. The ring gear is held fixed and the sun is driven at 900 rpm. Find the speed nc of the planet carrier.

Ns = 24Np = 15ns = 900 rpm
nc = rpm
17.Springs & pendulumsMedium
t (s)x (cm)0.05 s

A 2.4 kg mass on a spring with k = 340 N/m is pulled 13 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 0.05 s (with sign).

m = 2.4 kgk = 340 N/mA = 13 cmt = 0.05 s
x = cm
18.Springs & pendulumsHard
3.2 kgk = 420 N/mA = 6 cm

A 3.2 kg mass on a spring with k = 420 N/m is pulled 6 cm from equilibrium and released. Find its maximum speed vmax.

m = 3.2 kgk = 420 N/mA = 6 cm
vmax = m/s
19.Mechanical vibrationsMedium
tx20 mm5 cycles4.1 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 20 mm is followed 5 cycles later by a peak of 4.1 mm. Find the damping ratio ζ.

x0 = 20 mmx5 = 4.1 mmn = 5
ζ =
20.Mechanical vibrationsHard
k1​ = 10k2​ = 20m = 50 kg

A 50 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 10 kN/m and k₂ = 20 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 10 kN/mk2 = 20 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 11.11 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 120/3.6 = 33.33 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 33.33/3 = 11.11 s

Answer

t = 11.11 s
2.Kinematics

Answer: hmax = 106.8 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 26·1.5 = 39 m/s
h₁ = ½·26·1.5² = 29.25 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 39²/(2·9.81) = 77.52 m
hmax = 29.25 + 77.52 = 106.8 m

Answer

hmax = 106.8 m
3.Newton’s laws

Answer: F = 111.5 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Constant speed: the forces balance.

F = m·g·sin θ + μ·m·g·cos θ

Pushing force

F = 94.59 + 16.91 = 111.5 N

Answer

F = 111.5 N
4.Newton’s laws

Answer: T = 13.59 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 78.48 N
m₁·g·sin θ = 4.146 N
μ·m₁·g·cos θ = 1.334 N

Acceleration of the system

a = (78.48 − 4.146 − 1.334)/9 = 8.111 m/s²

Tension from the hanging mass

m2·g − T = m2·a → T = 8·(9.81 − 8.111) = 13.59 N

Answer

T = 13.59 N
5.Projectile motion

Answer: v0 = 36.67 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·105/sin 130°) = 36.67 m/s

Answer

v0 = 36.67 m/s
6.Projectile motion

Answer: x = 41.54 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 15·cos 55° = 8.604 m/s
vy = v0·sin θ = 15·sin 55° = 12.29 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 55 + 12.29·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (12.29 + √(151 + 1079))/9.81 = 4.828 s

Horizontal distance

x = vx·t = 8.604·4.828 = 41.54 m

Answer

x = 41.54 m
7.Circular motion

Answer: vmax = 15.66 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·50) = 15.66 m/s

Answer

vmax = 15.66 m/s (56.38 km/h)
8.Circular motion

Answer: Ttop = 43.03 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 11.5² − 4·9.81·1.5 = 73.39 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 1.1·73.39/1.5 − 1.1·9.81 = 43.03 N

Answer

Ttop = 43.03 N
9.Work & energy

Answer: T = 113.6 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the bottom

v² = 2gL(1 − cos θ) = 2·9.81·1·(1 − cos 70°) = 12.91 m²/s²

Forces at the bottom

m·g = 5·9.81 = 49.05 N
T = mg + mv²/L = 49.05 + 5·12.91/1 = 113.6 N

Answer

T = 113.6 N

Check: T = mg(3 − 2cos θ) = 113.6 N.

10.Work & energy

Answer: v = 7.985 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 9.81·(3.5 − 0.25·1) = 31.88 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·3.25) = 7.985 m/s

Answer

v = 7.985 m/s
11.Momentum & collisions

Answer: v′1 = −0.5882 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (4 − 4.5)/(4 + 4.5)·10 = −0.5882 m/s
v′2 = 2·4/(4 + 4.5)·10 = 9.412 m/s

Answer

v′1 = −0.5882 m/s

The minus sign means the first glider bounces back.

12.Momentum & collisions

Answer: v1 = 25.2 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.7·9.81·6.5) = 9.448 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 2400·9.448/900 = 25.2 m/s

Answer

v1 = 25.2 m/s
(90.7 km/h)
13.Rigid-body rotation

Answer: atip = 14.71 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·0.9) = 16.35 rad/s²

Acceleration of the free end

atip = α·L = 16.35·0.9 = 14.71 m/s²

Answer

atip = 14.71 m/s²

atip = 1.5·g for any length: the free end falls faster than a dropped stone.

14.Rigid-body rotation

Answer: v = 3.886 m/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 4.5·sin 20° = 1.539 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·1.539/2) = 3.886 m/s

Answer

v = 3.886 m/s
15.Gears & gear trains

Answer: N2 = 70

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·180/4 = 90

Split by the ratio

N1 = 90/(1 + 3.5) = 20
N2 = 3.5·20 = 70

Answer

N2 = 70
16.Gears & gear trains

Answer: nc = 276.9 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 24 + 2·15 = 54

Willis equation with the ring fixed

Set nr = 0 and solve for the carrier speed.

(900 − nc)/(0 − nc) = −54/24
nc = ns·Ns/(Ns + Nr) = 900·24/78 = 276.9 rpm

Answer

nc = 276.9 rpm

The carrier turns in the same direction as the sun.

17.Springs & pendulums

Answer: x = 10.77 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(340/2.4) = 11.9 rad/s
ω·t = 11.9·0.05 = 0.5951 rad

Displacement

x = A·cos(ω·t) = 13·cos(0.5951) = 10.77 cm

Answer

x = 10.77 cm
18.Springs & pendulums

Answer: vmax = 0.6874 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(420/3.2) = 11.46 rad/s

Maximum speed

vmax = A·ω = 0.06·11.46 = 0.6874 m/s

Answer

vmax = 0.6874 m/s
19.Mechanical vibrations

Answer: ζ = 0.05038

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/5)·ln(20/4.1) = 0.3169

Damping ratio

ζ = δ/√(4π² + δ²) = 0.3169/√(39.48 + 0.1005) = 0.05038

Answer

ζ = 0.05038
20.Mechanical vibrations

Answer: fn = 3.898 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 10 + 20 = 30 kN/m

Natural frequency

ωn = √(30000/50) = 24.49 rad/s
fn = 24.49/(2π) = 3.898 Hz

Answer

fn = 3.898 Hz

ExamProblems · examproblems.com/courses/dynamics