Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)4.615 s30

A car driving at 108 km/h brakes with a constant deceleration of 6.5 m/s² until it stops. Find the braking distance s.

v₀ = 108 km/ha = −6.5 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 20 m/s25 m

A ball is thrown straight up at 20 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 20 m/sh₀ = 25 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
boxv₀ = 4 m/sμ = ?

A box slides across a level floor with an initial speed of 4 m/s and comes to rest after 2 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 4 m/sd = 2 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
m1​ = 1.5 kg1.5 kgμ = 0.25

A 1.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 1.5 kg mass. The coefficient of kinetic friction between block and table is 0.25. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 1.5 kgm2 = 1.5 kgμ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 30 m/s60°x = ?

A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 30 m/sθ = 60°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 50 mv0​ = 26 m/s45°range

A ball is launched at 45° above horizontal from the top of a 50 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 26 m/sθ = 45°h = 50 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 125 mvmax​ = ?

A car takes a flat curve of radius 125 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 125 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.2 mv = 3.5 m/s

A 1.8 kg ball on a string 1.2 m long is swung in a vertical circle. At the lowest point it moves at 3.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.8 kgr = 1.2 mv = 3.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
35°d = 5 mμ = 0.4

A block slides from rest down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.4. Find its speed v after it has slid 5 m along the slope.

θ = 35°μ = 0.4d = 5 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 2.5 mL = 4 mμ = 0.25k = 500 N/m

A 4 kg block is released from rest at height 2.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4 m long (μ = 0.25) and then runs onto a spring (k = 500 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 4 kgh = 2.5 mL = 4 mμ = 0.25k = 500 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
12 kg63 m/s1 kgv′2​ = ?

A 13 kg projectile moving horizontally at 25 m/s explodes into two fragments that move along the same line. The 12 kg fragment continues forwards at 63 m/s. Find the velocity v′2 of the 1 kg fragment (positive in the original direction).

M = 13 kgu = 25 m/sm1 = 12 kgv′1 = 63 m/sm2 = 1 kg
v′2 = m/s
12.Momentum & collisionsHard
1500 kgv1​ = ?1300 kg

A 1500 kg car runs into a parked 1300 kg car. The wrecks lock together and skid 8 m before stopping. The coefficient of kinetic friction between tyres and road is 0.8. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 1500 kgm2 = 1300 kgd = 8 mμ = 0.8g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
n = 500 rpmT = 690 N·m

A motor delivers a torque of 690 N·m at 500 rpm. Find its power output P in kW.

T = 690 N·mn = 500 rpm
P = kW
14.Rigid-body rotationHard
10 m/sω

A thin hoop of mass 14.5 kg rolls without slipping at 10 m/s. What percentage p of its total kinetic energy is rotational?

m = 14.5 kgv = 10 m/sI = m·r²
p = %
15.Gears & gear trainsMedium
N1​ = 15N2​ = 25

A 15 kW motor running at 1450 rpm drives a pinion with 15 teeth, which meshes with a gear with 25 teeth. The gear pair has an efficiency of 96%. Find the output torque T2 on the gear shaft.

P = 15 kWn1 = 1450 rpmN1 = 15N2 = 25η = 96%
T2 = N·m
16.Gears & gear trainsHard
d1​ = 200 mmd2​ = 250 mm2880 rpmC = 500 mmT1​ = 1000 NT2​P = ?

An open belt connects a 200 mm driving pulley at 2880 rpm to a 250 mm pulley; the centres are 500 mm apart. The coefficient of friction is 0.3 and the tight-side tension may not exceed 1000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 200 mmn1 = 2880 rpmd2 = 250 mmC = 500 mmμ = 0.3T1 = 1000 N
P = kW
17.Springs & pendulumsMedium
0.3 kgk = 80 N/mA = 5 cmx = 3 cm

A 0.3 kg mass on a spring with k = 80 N/m oscillates on a frictionless surface with an amplitude of 5 cm. Find its speed v when it is 3 cm from equilibrium.

m = 0.3 kgk = 80 N/mA = 5 cmx = 3 cm
v = m/s
18.Springs & pendulumsHard
0.2 kgk = 310 N/mA = 12 cm

A 0.2 kg mass on a spring with k = 310 N/m is pulled 12 cm from equilibrium and released. Find its maximum acceleration amax.

m = 0.2 kgk = 310 N/mA = 12 cm
amax = m/s²
19.Mechanical vibrationsMedium
k = 200 kN/mc = 1410 N·s/mm = 10 kg

A 10 kg mass is supported by a spring with a stiffness of 200 kN/m and a viscous damper with a damping coefficient of 1410 N·s/m. Find the damping ratio ζ.

m = 10 kgk = 200 kN/mc = 1410 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 20k2​ = 15m = 100 kg

A 100 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 20 kN/m and k₂ = 15 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 20 kN/mk2 = 15 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 69.23 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 108/3.6 = 30 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 30²/(2·6.5) = 69.23 m

Answer

s = 69.23 m
2.Kinematics

Answer: t = 5.081 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−25 = 20·t − ½·9.81·t²
4.905·t² − 20·t − 25 = 0

Solve the quadratic

Only the positive root is physical.

t = (20 + √(20² + 2·9.81·25))/9.81 = 5.081 s

Answer

t = 5.081 s
3.Newton’s laws

Answer: μ = 0.4077

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 4²/(2·2) = 4 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 4/9.81 = 0.4077

Answer

μ = 0.4077
4.Newton’s laws

Answer: T = 9.197 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (14.71 − 3.679)/3 = 3.679 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 1.5·3.679 + 3.679 = 9.197 N

Answer

T = 9.197 N
5.Projectile motion

Answer: x = 79.45 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 30·cos 60° = 15 m/s
vy = v0·sin θ = 30·sin 60° = 25.98 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·25.98/9.81 = 5.297 s

Horizontal distance

x = vx·t = 15·5.297 = 79.45 m

Answer

x = 79.45 m
6.Projectile motion

Answer: t = 5.576 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 26·cos 45° = 18.38 m/s
vy = v0·sin θ = 26·sin 45° = 18.38 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 50 + 18.38·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (18.38 + √(338 + 981))/9.81 = 5.576 s

Answer

t = 5.576 s
7.Circular motion

Answer: vmax = 27.12 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·125) = 27.12 m/s

Answer

vmax = 27.12 m/s (97.65 km/h)
8.Circular motion

Answer: T = 36.03 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.8·9.81 + 1.8·3.5²/1.2 = 17.66 + 18.38 = 36.03 N

Answer

T = 36.03 N
9.Work & energy

Answer: v = 4.912 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·5·(0.5736 − 0.4·0.8192)) = 4.912 m/s

Answer

v = 4.912 m/s
10.Work & energy

Answer: v = 5.425 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 39.24·(2.5 − 0.25·4) = 58.86 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·1.5) = 5.425 m/s

Answer

v = 5.425 m/s
11.Momentum & collisions

Answer: v′2 = −431 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 13·25 = 325 kg·m/s

Momentum after

325 = 12·63 + 1·v′2
v′2 = (325 − 756)/1 = −431 m/s

Answer

v′2 = −431 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: v1 = 20.92 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.8·9.81·8) = 11.21 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 2800·11.21/1500 = 20.92 m/s

Answer

v1 = 20.92 m/s
(75.3 km/h)
13.Rigid-body rotation

Answer: P = 36.13 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·500/60 = 52.36 rad/s

Power

P = T·ω = 690·52.36 = 36128 W = 36.13 kW

Answer

P = 36.13 kW
14.Rigid-body rotation

Answer: p = 50 %

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·14.5·10² = 725 J
Erot = ½·I·ω² = ½·1·m·r²·(v/r)² = 1·725 = 725 J

Rotational share

p = 725/1450·100% = c/(1 + c)·100% = 50%

Answer

p = 50 %

The share depends only on the shape, not on the mass or the speed.

15.Gears & gear trains

Answer: T2 = 158.1 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1450/60 = 151.8 rad/s
T1 = P/ω₁ = 15000/151.8 = 98.79 N·m

Output torque

T2 = 98.79·25/15·0.96 = 158.1 N·m

Answer

T2 = 158.1 N·m
16.Gears & gear trains

Answer: P = 18.05 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 3.042 rad

Slack-side tension

eμθ = e0.9125 = 2.49, T₂ = 1000/2.49 = 401.5 N

Power

P = (1000 − 401.5)·30.16 = 18.05 kW

Answer

P = 18.05 kW
17.Springs & pendulums

Answer: v = 0.6532 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(80/0.3) = 16.33 rad/s

Speed at x

v = ω·√(A² − x²) = 16.33·√(0.05² − 0.03²) = 0.6532 m/s

Answer

v = 0.6532 m/s
18.Springs & pendulums

Answer: amax = 186 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(310/0.2) = 39.37 rad/s

Maximum acceleration

amax = A·ω² = 0.12·39.37² = 186 m/s²

Answer

amax = 186 m/s²
19.Mechanical vibrations

Answer: ζ = 0.4985

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(200000·10) = 2828 N·s/m

Damping ratio

ζ = c/cc = 1410/2828 = 0.4985

Answer

ζ = 0.4985

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 2.978 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 20 + 15 = 35 kN/m

Natural frequency

ωn = √(35000/100) = 18.71 rad/s
fn = 18.71/(2π) = 2.978 Hz

Answer

fn = 2.978 Hz

ExamProblems · examproblems.com/courses/dynamics