In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A plane needs a speed of 200 km/h to take off and the usable runway is 1400 m long. Starting from rest, what constant acceleration a does it need?
v₀ = 0v = 200 km/hs = 1400 m
a = m/s²
2.KinematicsHard
A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 38 m/s² for 2.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.
a = 38 m/s²t1 = 2.5 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 7 kg block slides down a frictionless slope at 25° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 7 kgθ = 25°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 3.5 kg block on a ramp at 20° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 3.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.2. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 3.5 kgm2 = 3.5 kgθ = 20°μ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 55° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 34 m/sθ = 55°g = 9.81 m/s²
t = s
6.Projectile motionHard
A ball is launched at 45° above horizontal from the top of a 60 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 14 m/sθ = 45°h = 60 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A curve of radius 140 m is banked at 15°. At what speed v can a car take it with no friction needed at all? Use g = 9.81 m/s².
r = 140 mθ = 15°g = 9.81 m/s²
v = m/s
8.Circular motionHard
A 1.8 kg ball on a string 0.7 m long is swung in a vertical circle. At the lowest point it moves at 6 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 1.8 kgr = 0.7 mv = 6 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
A toy launcher has a vertical spring of stiffness 500 N/m. A 0.2 kg ball is placed on it and the spring is compressed by 6 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.
m = 0.2 kgk = 500 N/mx = 6 cmg = 9.81 m/s²
h = m
10.Work & energyHard
A 0.5 kg cart is released from rest at a height of 6 m on a smooth track that leads into a vertical circular loop of radius 2 m. Find the normal force N the track exerts on the cart at the top of the loop.
m = 0.5 kgh = 6 mR = 2 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
A 1900 kg car moving at 17 m/s runs into a stationary 600 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?
m1 = 1900 kgv1 = 17 m/sm2 = 600 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
A 1400 kg car runs into a parked 1200 kg car. The wrecks lock together and skid 21.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.
An 8 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 19.5 kg and radius 0.45 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the acceleration a of the block.
m = 8 kgM = 19.5 kgR = 0.45 mg = 9.81 m/s²
a = m/s²
14.Rigid-body rotationHard
A solid cylinder starts from rest and rolls without slipping down a slope inclined at 30° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 1 m along the slope.
θ = 30°s = 1 mI = ½·m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
A belt runs on a 200 mm driving pulley at 960 rpm. The tension is 400 N on the tight side and 200 N on the slack side. Find the power P transmitted, in kW.
d1 = 200 mmn1 = 960 rpmT1 = 400 NT2 = 200 N
P = kW
16.Gears & gear trainsHard
An open belt connects a 200 mm driving pulley at 960 rpm to a 250 mm pulley; the centres are 1200 mm apart. The coefficient of friction is 0.3 and the tight-side tension may not exceed 1000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).
A simple pendulum has a length of 2.8 m. Use g = 9.81 m/s². Find its period T for small swings.
L = 2.8 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
A 3.2 kg mass on a spring with k = 420 N/m is pulled 17 cm from equilibrium and released. Find its maximum speed vmax.
m = 3.2 kgk = 420 N/mA = 17 cm
vmax = m/s
19.Mechanical vibrationsMedium
A 15 kg mass on a spring with a stiffness of 40 kN/m has a viscous damper giving a damping ratio of 0.3. Find the damped natural frequency fd of its free vibration in Hz.
m = 15 kgk = 40 kN/mζ = 0.3
fd = Hz
20.Mechanical vibrationsHard
A 25 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 20 kN/m and k₂ = 10 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 25 kgk1 = 20 kN/mk2 = 10 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: a = 1.102 m/s²
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v = 200/3.6 = 55.56 m/s
Acceleration
a = v²/(2s) = 55.56²/(2·1400) = 1.102 m/s²
Answer
a = 1.102 m/s²
2.Kinematics
Answer: hmax = 578.7 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Powered phase
v₁ = 38·2.5 = 95 m/s
h₁ = ½·38·2.5² = 118.8 m
Free flight up
At the top the velocity is zero.
Δh = v₁²/(2g) = 95²/(2·9.81) = 460 m
hmax = 118.8 + 460 = 578.7 m
Answer
hmax = 578.7 m
3.Newton’s laws
Answer: a = 4.146 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 34.34 N
m₁·g·sin θ = 11.74 N
μ·m₁·g·cos θ = 6.453 N
Acceleration of the system
a = (34.34 − 11.74 − 6.453)/7 = 2.306 m/s²
Tension from the hanging mass
m2·g − T = m2·a → T = 3.5·(9.81 − 2.306) = 26.27 N
Answer
T = 26.27 N
5.Projectile motion
Answer: t = 5.678 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 34·cos 55° = 19.5 m/s
vy = v0·sin θ = 34·sin 55° = 27.85 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·27.85/9.81 = 5.678 s
Answer
t = 5.678 s
6.Projectile motion
Answer: x = 46.03 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 14·cos 45° = 9.899 m/s
vy = v0·sin θ = 14·sin 45° = 9.899 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 60 + 9.899·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (9.899 + √(98 + 1177))/9.81 = 4.649 s
Horizontal distance
x = vx·t = 9.899·4.649 = 46.03 m
Answer
x = 46.03 m
7.Circular motion
Answer: v = 19.18 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
v = √(r·g·tan θ) = √(140·9.81·tan 15°) = 19.18 m/s
Answer
v = 19.18 m/s
(69.06 km/h)
8.Circular motion
Answer: T = 110.2 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 1.8·9.81 + 1.8·6²/0.7 = 17.66 + 92.57 = 110.2 N
Answer
T = 110.2 N
9.Work & energy
Answer: h = 0.4587 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Spring energy
x = 6 cm = 0.06 m
½kx² = ½·500·0.06² = 0.9 J
Height
m·g = 0.2·9.81 = 1.962 N
h = ½kx²/(mg) = 0.9/1.962 = 0.4587 m
Answer
h = 0.4587 m
10.Work & energy
Answer: N = 4.905 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(6 − 4) = 39.24 m²/s²
Forces at the top
m·g = 0.5·9.81 = 4.905 N
N = mv²/R − mg = 0.5·39.24/2 − 4.905 = 4.905 N
Answer
N = 4.905 N
The cart just makes it round when h = 2.5R; then N = 0 at the top.
11.Momentum & collisions
Answer: ΔK = 65892 J
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 1900·17/2500 = 12.92 m/s
Kinetic energy before and after
Kbefore = ½·1900·17² = 274550 J
Kafter = ½·2500·12.92² = 208658 J
Energy lost
ΔK = 274550 − 208658 = 65892 J
Answer
ΔK = 65892 J
The lost energy goes into deformation, heat and sound.
12.Momentum & collisions
Answer: v1 = 26.97 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Height dropped
h = s·sin θ = 1·sin 30° = 0.5 m
Energy balance with rolling
Rolling without slipping: ω = v/r, and friction does no work at the contact point.
m·g·h = ½·m·v²·(1 + 0.5)
v = √(2·9.81·0.5/1.5) = 2.557 m/s
Answer
v = 2.557 m/s
15.Gears & gear trains
Answer: P = 2.011 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt speed
v = 10.05 m/s
Power
P = (400 − 200)·10.05 = 2011 W = 2.011 kW
Answer
P = 2.011 kW
16.Gears & gear trains
Answer: P = 6.087 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Angle of wrap
θ = 3.1 rad
Slack-side tension
eμθ = e0.93 = 2.534, T₂ = 1000/2.534 = 394.6 N
Power
P = (1000 − 394.6)·10.05 = 6.087 kW
Answer
P = 6.087 kW
17.Springs & pendulums
Answer: T = 3.357 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Pendulum period
T = 2π·√(2.8/9.81) = 3.357 s
Answer
T = 3.357 s
18.Springs & pendulums
Answer: vmax = 1.948 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(420/3.2) = 11.46 rad/s
Maximum speed
vmax = A·ω = 0.17·11.46 = 1.948 m/s
Answer
vmax = 1.948 m/s
19.Mechanical vibrations
Answer: fd = 7.84 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(40000/15) = 51.64 rad/s
fn = 51.64/(2π) = 8.219 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 8.219·√(1 − 0.3²) = 7.84 Hz
Answer
fd = 7.84 Hz
20.Mechanical vibrations
Answer: fn = 5.513 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.