Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = ?s = 1600 m

A plane needs a speed of 250 km/h to take off and the usable runway is 1600 m long. Starting from rest, what constant acceleration a does it need?

v₀ = 0v = 250 km/hs = 1600 m
a = m/s²
2.KinematicsHard
a = 20 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 20 m/s² for 1.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². How long after launch does it hit the ground? Find t.

a = 20 m/s²t1 = 1.5 sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 25°25 kgF = ?

A 25 kg box is pushed up a ramp at 25° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the pushing force F.

m = 25 kgθ = 25°μ = 0.2g = 9.81 m/s²
F = N
4.Newton’s lawsHard
m1​ = 9 kg8.5 kgθ = 35°

A 9 kg block on a ramp at 35° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 8.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 9 kgm2 = 8.5 kgθ = 35°μ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 14 m/s40°rangeH = ?

A ball is launched at 40° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 14 m/sθ = 40°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 25 mv0​ = 12 m/s40°H = ?

A ball is launched at 12 m/s and 40° above the horizontal from the top of a 25 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 12 m/sθ = 40°h = 25 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 30 mvmax​ = ?

A car takes a flat curve of radius 30 m. The coefficient of static friction between tyres and road is 0.3. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 30 mμs = 0.3g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
θ = 18°to centrevmax​ = ?

A curve of radius 140 m is banked at 18°, and the coefficient of static friction between tyres and road is 0.15. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.

r = 140 mθ = 18°μs = 0.15g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
30°d = 11 mμ = 0.1

A 1 kg block slides 11 m down a slope at 30° to the horizontal, with a coefficient of kinetic friction of 0.1. Find the work Wf done against friction.

m = 1 kgθ = 30°μ = 0.1d = 11 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 4 mL = 1 mμ = 0.3k = 1500 N/m

A 2 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1 m long (μ = 0.3) and then runs onto a spring (k = 1500 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 2 kgh = 4 mL = 1 mμ = 0.3k = 1500 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
2 kg12 m/s0.5 kg

A 2 kg glider moving at 12 m/s makes a perfectly elastic head-on collision with a 0.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 2 kgm2 = 0.5 kgv1 = 12 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
16 m/s12 m/s

A 0.15 kg ball hits a wall at 16 m/s and bounces straight back at 12 m/s. The contact lasts 10 ms. Find the average force Favg of the wall on the ball.

m = 0.15 kgvin = 16 m/svout = 12 m/sΔt = 10 ms
Favg = N
13.Rigid-body rotationMedium
v = ?L = 2.2 mm = 1.5 kg

A uniform slender rod of mass 1.5 kg and length 2.2 m is pinned at one end and released from rest in a horizontal position. Ignore friction and use g = 9.81 m/s². Find the speed v of the free end as the rod swings through the vertical position.

m = 1.5 kgL = 2.2 mg = 9.81 m/s²
v = m/s
14.Rigid-body rotationHard
θ = 20°vs = 1.5 m

A thin hoop starts from rest and rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 1.5 m along the slope.

θ = 20°s = 1.5 mI = m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
d1​ = 160 mmd2​ = 250 mm960 rpmT1​ = 800 NT2​ = 160 NP = ?

A belt runs on a 160 mm driving pulley at 960 rpm. The tension is 800 N on the tight side and 160 N on the slack side. Find the power P transmitted, in kW.

d1 = 160 mmn1 = 960 rpmT1 = 800 NT2 = 160 N
P = kW
16.Gears & gear trainsHard
d1​ = 80 mmd2​ = 400 mm1450 rpmC = 500 mmT1​ = 1200 NT2​P = ?

An open belt connects an 80 mm driving pulley at 1450 rpm to a 400 mm pulley; the centres are 500 mm apart. The coefficient of friction is 0.35 and the tight-side tension may not exceed 1200 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 80 mmn1 = 1450 rpmd2 = 400 mmC = 500 mmμ = 0.35T1 = 1200 N
P = kW
17.Springs & pendulumsMedium
L = 1.9 mT = 6.8 s

An astronaut on another planet finds that a simple pendulum 1.9 m long has a period of 6.8 s for small swings. Find the gravitational acceleration g on that planet.

L = 1.9 mT = 6.8 s
g = m/s²
18.Springs & pendulumsHard
2.6 kgk = 440 N/m

A 2.6 kg mass is attached to the lower end of an unstretched vertical spring with k = 440 N/m and released from rest. Use g = 9.81 m/s². Find the greatest extension xmax of the spring in cm.

m = 2.6 kgk = 440 N/mg = 9.81 m/s²
xmax = cm
19.Mechanical vibrationsMedium
k = 200 kN/mc = 320 N·s/mm = 50 kg

A 50 kg mass is supported by a spring with a stiffness of 200 kN/m and a viscous damper with a damping coefficient of 320 N·s/m. Find the damping ratio ζ.

m = 50 kgk = 200 kN/mc = 320 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 12k2​ = 10k3​ = 80m = 5 kg

A 5 kg mass hangs from spring k₃ = 80 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 12 kN/m and k₂ = 10 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 12 kN/mk2 = 10 kN/mk3 = 80 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: a = 1.507 m/s²

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v = 250/3.6 = 69.44 m/s

Acceleration

a = v²/(2s) = 69.44²/(2·1600) = 1.507 m/s²

Answer

a = 1.507 m/s²
2.Kinematics

Answer: t = 8.292 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 20·1.5 = 30 m/s
h₁ = ½·20·1.5² = 22.5 m

Free flight to the ground

Solve −h₁ = v₁·t₂ − ½·g·t₂² for the positive root.

t₂ = (30 + √(30² + 2·9.81·22.5))/9.81 = 6.792 s
t = 1.5 + 6.792 = 8.292 s

Answer

t = 8.292 s
3.Newton’s laws

Answer: F = 148.1 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Constant speed: the forces balance.

F = m·g·sin θ + μ·m·g·cos θ

Pushing force

F = 103.6 + 44.45 = 148.1 N

Answer

F = 148.1 N
4.Newton’s laws

Answer: a = 1.458 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 83.39 N
m₁·g·sin θ = 50.64 N
μ·m₁·g·cos θ = 7.232 N

Acceleration of the system

a = (83.39 − 50.64 − 7.232)/17.5 = 1.458 m/s²

Answer

a = 1.458 m/s²
5.Projectile motion

Answer: H = 4.128 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 14·cos 40° = 10.72 m/s
vy = v0·sin θ = 14·sin 40° = 8.999 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 8.999²/(2·9.81) = 4.128 m

Answer

H = 4.128 m
6.Projectile motion

Answer: H = 28.03 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 12·sin 40° = 7.713 m/s

Rise above the cliff

Δh = vy²/(2g) = 7.713²/(2·9.81) = 3.032 m

Height above the ground

H = 25 + 3.032 = 28.03 m

Answer

H = 28.03 m
7.Circular motion

Answer: vmax = 9.396 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.3·9.81·30) = 9.396 m/s

Answer

vmax = 9.396 m/s (33.83 km/h)
8.Circular motion

Answer: vmax = 26.19 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points down the slope.

N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g

Speed

v = √(140·9.81·0.4517/0.9047) = 26.19 m/s

Answer

vmax = 26.19 m/s
(94.27 km/h)
9.Work & energy

Answer: Wf = 9.345 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 9.81·0.866 = 8.496 N
F = μN = 0.1·8.496 = 0.8496 N

Work against friction

Wf = F·d = 0.8496·11 = 9.345 J

Answer

Wf = 9.345 J
10.Work & energy

Answer: x = 31.11 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 19.62·(4 − 0.3·1) = 72.59 J

Maximum compression

½kx² = 72.59 → x = √(2·72.59/1500) = 0.3111 m = 31.11 cm

Answer

x = 31.11 cm
11.Momentum & collisions

Answer: v′2 = 19.2 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (2 − 0.5)/(2 + 0.5)·12 = 7.2 m/s
v′2 = 2·2/(2 + 0.5)·12 = 19.2 m/s

Answer

v′2 = 19.2 m/s
12.Momentum & collisions

Answer: Favg = 420 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.15·(12 + 16) = 4.2 N·s

Average force

Favg = J/Δt = 4.2/0.01 = 420 N

Answer

Favg = 420 N
13.Rigid-body rotation

Answer: v = 8.046 m/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 = 1.5·9.81·1.1 = 16.19 J

Moment of inertia about the pin

IO = m·L²/3 = 1.5·2.2²/3 = 2.42 kg·m²

Energy balance

½·IO·ω² = 16.19 → ω = √(2·16.19/2.42) = 3.657 rad/s
v = ω·L = 3.657·2.2 = 8.046 m/s

Answer

v = 8.046 m/s
14.Rigid-body rotation

Answer: v = 2.243 m/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 1.5·sin 20° = 0.513 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·0.513/2) = 2.243 m/s

Answer

v = 2.243 m/s
15.Gears & gear trains

Answer: P = 5.147 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 8.042 m/s

Power

P = (800 − 160)·8.042 = 5147 W = 5.147 kW

Answer

P = 5.147 kW
16.Gears & gear trains

Answer: P = 4.24 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.49 rad

Slack-side tension

eμθ = e0.8715 = 2.391, T₂ = 1200/2.391 = 502 N

Power

P = (1200 − 502)·6.074 = 4.24 kW

Answer

P = 4.24 kW
17.Springs & pendulums

Answer: g = 1.622 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for g

g = 4π²·L/T² = 4π²·1.9/6.8² = 1.622 m/s²

Answer

g = 1.622 m/s²
18.Springs & pendulums

Answer: xmax = 11.59 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 2.6·9.81/440 = 0.05797 m = A

Lowest point

xmax = 2A = 0.1159 m = 11.59 cm

Answer

xmax = 11.59 cm
19.Mechanical vibrations

Answer: ζ = 0.0506

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(200000·50) = 6325 N·s/m

Damping ratio

ζ = c/cc = 320/6325 = 0.0506

Answer

ζ = 0.0506

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 9.35 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 12 + 10 = 22 kN/m
keq = 22·80/(22 + 80) = 17.25 kN/m

Natural frequency

ωn = √(17255/5) = 58.75 rad/s
fn = 58.75/(2π) = 9.35 Hz

Answer

fn = 9.35 Hz

ExamProblems · examproblems.com/courses/dynamics