Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 2.5 m/s²car16 m/s

A car speeding at a constant 16 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 2.5 m/s². How far from its starting point does the police car catch up? Find d.

vcar = 16 m/sapolice = 2.5 m/s²v0,police = 0
d = m
2.KinematicsHard
v₀ = 5 m/s35 m

A ball is thrown straight up at 5 m/s from the edge of a roof 35 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 5 m/sh₀ = 35 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 35°50 kgF = ?

A 50 kg box is pushed up a ramp at 35° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.4. Use g = 9.81 m/s². Find the pushing force F.

m = 50 kgθ = 35°μ = 0.4g = 9.81 m/s²
F = N
4.Newton’s lawsHard
θ = 30°blockv₀ = 12 m/s

A block is given a push so that it starts sliding up a ramp at 30° with a speed of 12 m/s. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 12 m/sθ = 30°μ = 0.2g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = ?70°R = 15 m

A ball is launched from level ground at 70° above the horizontal and lands 15 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 70°R = 15 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 30 mv0​ = 21 m/s25°v = ?

A ball is launched at 21 m/s and 25° above the horizontal from the top of a 30 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the speed v with which it hits the ground.

v₀ = 21 m/sθ = 25°h = 30 mg = 9.81 m/s²
v = m/s
7.Circular motionMedium
r = 35 m10 m/s

A 1300 kg car drives over the top of a hump in the road at 10 m/s. The top of the hump is a circular arc of radius 35 m. Use g = 9.81 m/s². Find the normal force N of the road on the car at the top.

m = 1300 kgv = 10 m/sr = 35 mg = 9.81 m/s²
N = N
8.Circular motionHard
r = 1.5 mv = 5 m/s

A 0.5 kg ball on a string 1.5 m long is swung in a vertical circle. At the lowest point it moves at 5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 0.5 kgr = 1.5 mv = 5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
35°d = 20 mμ = 0.15

A 4 kg block slides 20 m down a slope at 35° to the horizontal, with a coefficient of kinetic friction of 0.15. Find the work Wf done against friction.

m = 4 kgθ = 35°μ = 0.15d = 20 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
3 kg5 kgμ = 0.3d = 1 m

A 3 kg block rests on a rough horizontal table (μ = 0.3). A light string runs from it over a smooth pulley at the edge of the table to a hanging 5 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 1 m.

m1 = 3 kgm2 = 5 kgμ = 0.3d = 1 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
6 kg54 m/s3 kgv′2​ = ?

A 9 kg projectile moving horizontally at 30 m/s explodes into two fragments that move along the same line. The 6 kg fragment continues forwards at 54 m/s. Find the velocity v′2 of the 3 kg fragment (positive in the original direction).

M = 9 kgu = 30 m/sm1 = 6 kgv′1 = 54 m/sm2 = 3 kg
v′2 = m/s
12.Momentum & collisionsHard
1 kgv = ?5 g25°L = 0.7 m

A 5 g bullet is fired horizontally into a 1 kg block hanging from light strings 0.7 m long, and stays in it. The strings swing out to a largest angle of 25° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 5 gM = 1 kgL = 0.7 mθ = 25°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
L = 1.5 mm = 2.5 kgα

A uniform slender rod of mass 2.5 kg and length 1.5 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 2.5 kgL = 1.5 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
10 m/sω

A solid sphere of mass 17.5 kg rolls without slipping at 10 m/s. Find its total kinetic energy Ek.

m = 17.5 kgv = 10 m/sI = (2/5)·m·r²
Ek = J
15.Gears & gear trainsMedium
N1​ = 16, m = 2.5 mm

A 7.5 kW motor running at 2900 rpm drives a pinion with 16 teeth and a module of 2.5 mm. Find the tangential force Ft on the pinion teeth.

P = 7.5 kWn = 2900 rpmN1 = 16m = 2.5 mm
Ft = N
16.Gears & gear trainsHard
A = 32B = 45C = 18D = 32

A 5.5 kW motor at 1450 rpm drives gear A (32 teeth), which meshes with gear B (45 teeth). Gear C (18 teeth) on the same shaft as B drives gear D (32 teeth) on the output shaft. Each gear mesh has an efficiency of 95%. Find the output torque Tout.

P = 5.5 kWnin = 1450 rpmA = 32B = 45C = 18D = 32ηmesh = 95%
Tout = N·m
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 1.6 s? Use g = 9.81 m/s². Find L.

T = 1.6 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
1.3 kgk = 360 N/mA = 15 cm

A 1.3 kg mass on a spring with k = 360 N/m is pulled 15 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 1.3 kgk = 360 N/mA = 15 cm
E = J
19.Mechanical vibrationsMedium
k = 25 kN/mc = 130 N·s/mm = 25 kg

A 25 kg mass is supported by a spring with a stiffness of 25 kN/m and a viscous damper with a damping coefficient of 130 N·s/m. Find the damping ratio ζ.

m = 25 kgk = 25 kN/mc = 130 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 50k2​ = 25k3​ = 15m = 40 kg

A 40 kg mass hangs from spring k₃ = 15 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 50 kN/m and k₂ = 25 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 50 kN/mk2 = 25 kN/mk3 = 15 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 204.8 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·16/2.5 = 12.8 s

Distance

d = v·t = 16·12.8 = 204.8 m

Answer

d = 204.8 m

At that moment the police car moves at 2v = 32 m/s.

2.Kinematics

Answer: t = 3.229 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−35 = 5·t − ½·9.81·t²
4.905·t² − 5·t − 35 = 0

Solve the quadratic

Only the positive root is physical.

t = (5 + √(5² + 2·9.81·35))/9.81 = 3.229 s

Answer

t = 3.229 s
3.Newton’s laws

Answer: F = 442.1 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Constant speed: the forces balance.

F = m·g·sin θ + μ·m·g·cos θ

Pushing force

F = 281.3 + 160.7 = 442.1 N

Answer

F = 442.1 N
4.Newton’s laws

Answer: d = 10.9 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 30° + 0.2·cos 30°) = 6.604 m/s²

Distance

d = v₀²/(2a) = 12²/(2·6.604) = 10.9 m

Answer

d = 10.9 m
5.Projectile motion

Answer: v0 = 15.13 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·15/sin 140°) = 15.13 m/s

Answer

v0 = 15.13 m/s
6.Projectile motion

Answer: v = 32.09 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 21·cos 25° = 19.03 m/s
vy0 = 21·sin 25° = 8.875 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(8.875² + 2·9.81·30) = 25.83 m/s

Impact speed

v = √(19.03² + 25.83²) = 32.09 m/s

Answer

v = 32.09 m/s

Check with energy: v² = v₀² + 2gh.

7.Circular motion

Answer: N = 9039 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the top

Towards the centre (down) is positive.

m·g − N = m·v²/r
N = 1300·9.81 − 1300·10²/35 = 12753 − 3714 = 9039 N

Answer

N = 9039 N

The car feels lighter: the road pushes up less than its weight.

8.Circular motion

Answer: T = 13.24 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 0.5·9.81 + 0.5·5²/1.5 = 4.905 + 8.333 = 13.24 N

Answer

T = 13.24 N
9.Work & energy

Answer: Wf = 96.43 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 39.24·0.8192 = 32.14 N
F = μN = 0.15·32.14 = 4.822 N

Work against friction

Wf = F·d = 4.822·20 = 96.43 J

Answer

Wf = 96.43 J
10.Work & energy

Answer: v = 3.171 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 49.05·1 = 49.05 J
μ·m₁g·d = 0.3·29.43·1 = 8.829 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 40.22 → v = √(2·40.22/8) = 3.171 m/s

Answer

v = 3.171 m/s
11.Momentum & collisions

Answer: v′2 = −18 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 9·30 = 270 kg·m/s

Momentum after

270 = 6·54 + 3·v′2
v′2 = (270 − 324)/3 = −18 m/s

Answer

v′2 = −18 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: v = 228 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 0.7·(1 − cos 25°) = 0.06558 m

Speed after impact

V = √(2·9.81·0.06558) = 1.134 m/s

Collision

v = (m + M)·V/m = 1.005·1.134/0.005 = 228 m/s

Answer

v = 228 m/s
13.Rigid-body rotation

Answer: R = 6.131 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·1.5) = 9.81 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 2.5·(9.81 − 7.357) = 6.131 N

Answer

R = 6.131 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: Ek = 1225 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·17.5·10² = 875 J
Erot = ½·I·ω² = ½·0.4·m·r²·(v/r)² = 0.4·875 = 350 J

Total

Ek = 875 + 350 = 1225 J

Answer

Ek = 1225 J
15.Gears & gear trains

Answer: Ft = 1235 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·2900/60 = 303.7 rad/s
T = P/ω = 7500/303.7 = 24.7 N·m

Pitch diameter

d = m·N = 2.5·16 = 40 mm

Tangential force

Ft = 2T/d = 2·24.7/0.04 = 1235 N

Answer

Ft = 1235 N
16.Gears & gear trains

Answer: Tout = 81.72 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1450·(32/45)·(18/32) = 580 rpm
ωout = 2π·580/60 = 60.74 rad/s

Output power and torque

Pout = 5500·0.95² = 4964 W
Tout = Pout/ωout = 4964/60.74 = 81.72 N·m

Answer

Tout = 81.72 N·m
17.Springs & pendulums

Answer: L = 0.6361 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(1.6/2π)² = 0.6361 m

Answer

L = 0.6361 m
18.Springs & pendulums

Answer: E = 4.05 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(360/1.3) = 16.64 rad/s

Energy

E = ½·k·A² = ½·360·0.15² = 4.05 J

Answer

E = 4.05 J
19.Mechanical vibrations

Answer: ζ = 0.08222

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(25000·25) = 1581 N·s/m

Damping ratio

ζ = c/cc = 130/1581 = 0.08222

Answer

ζ = 0.08222

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 2.813 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 50 + 25 = 75 kN/m
keq = 75·15/(75 + 15) = 12.5 kN/m

Natural frequency

ωn = √(12500/40) = 17.68 rad/s
fn = 17.68/(2π) = 2.813 Hz

Answer

fn = 2.813 Hz

ExamProblems · examproblems.com/courses/dynamics