In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car speeding at a constant 32 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 6 m/s². How far from its starting point does the police car catch up? Find d.
vcar = 32 m/sapolice = 6 m/s²v0,police = 0
d = m
2.KinematicsHard
Ball A is dropped from rest from a height of 20 m. At the same instant ball B is thrown straight up from the ground directly below at 12 m/s. Ignore air resistance and use g = 9.81 m/s². At what height y above the ground do they meet?
H = 20 mv0B = 12 m/sg = 9.81 m/s²
y = m
3.Newton’s lawsMedium
A 7 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 7 kgθ = 30°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 2.5 kg block on a ramp at 40° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.2. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 2.5 kgm2 = 5 kgθ = 40°μ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 45° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.
v0 = 14 m/sθ = 45°g = 9.81 m/s²
H = m
6.Projectile motionHard
A ball is thrown from ground level at 24 m/s and 70° above the horizontal. It lands on the flat roof of a building 5 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.
v₀ = 24 m/sθ = 70°hroof = 5 mg = 9.81 m/s²
x = m
7.Circular motionMedium
In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 3.4 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.8. Use g = 9.81 m/s². Find the smallest rotation rate n in revolutions per minute.
r = 3.4 mμs = 0.8g = 9.81 m/s²
n = rpm
8.Circular motionHard
A ball on a string 0.7 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?
r = 0.7 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
A block slides from rest down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.2. Find its speed v after it has slid 17 m along the slope.
θ = 45°μ = 0.2d = 17 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
A spring of stiffness 5000 N/m at the bottom of a 35° slope is compressed by 5 cm against a 3 kg block and released. The coefficient of kinetic friction between block and slope is 0.15. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)
An 800 kg car moving at 13 m/s runs into a stationary 1900 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?
m1 = 800 kgv1 = 13 m/sm2 = 1900 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
A 0.15 kg ball hits a wall at 15 m/s and bounces straight back at 12 m/s. The contact lasts 25 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.15 kgvin = 15 m/svout = 12 m/sΔt = 25 ms
J = N·s
13.Rigid-body rotationMedium
A flywheel with a moment of inertia of 13 kg·m² spins at 1800 rpm. A brake applies a constant friction torque of 155 N·m. How many revolutions N does the flywheel make before it stops?
I = 13 kg·m²n = 1800 rpmTb = 155 N·m
N = rev
14.Rigid-body rotationHard
A person stands on a frictionless turntable and holds a 3 kg dumbbell in each hand, 0.65 m from the axis. The person and turntable alone have a moment of inertia of 3 kg·m² about the axis. They turn at 55 rpm, then pull the dumbbells in to 0.35 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.
A 200 mm pulley at 1500 rpm drives a 400 mm pulley by a belt with 3 % slip. Find the speed n2 of the driven pulley.
n1 = 1500 rpmd1 = 200 mmd2 = 400 mms = 3 %
n2 = rpm
16.Gears & gear trainsHard
A 4 kW motor at 960 rpm drives gear A (24 teeth), which meshes with gear B (32 teeth). Gear C (30 teeth) on the same shaft as B drives gear D (36 teeth) on the output shaft. Each gear mesh has an efficiency of 96%. Find the output torque Tout.
A simple pendulum has a length of 2.5 m. Use g = 9.81 m/s². Find its period T for small swings.
L = 2.5 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
A 0.6 kg mass on a spring with k = 400 N/m is pulled 17 cm from equilibrium and released. Find the total energy E of the oscillation.
m = 0.6 kgk = 400 N/mA = 17 cm
E = J
19.Mechanical vibrationsMedium
A 20 kg mass is supported by a spring with a stiffness of 25 kN/m and a viscous damper with a damping coefficient of 210 N·s/m. Find the damping ratio ζ.
m = 20 kgk = 25 kN/mc = 210 N·s/m
ζ =
20.Mechanical vibrationsHard
A 25 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 30 kN/m and the lower one k₂ = 100 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.
m = 25 kgk1 = 30 kN/mk2 = 100 kN/m
keq = kN/m
3Solutions
1.Kinematics
Answer: d = 341.3 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·32/6 = 10.67 s
Distance
d = v·t = 32·10.67 = 341.3 m
Answer
d = 341.3 m
At that moment the police car moves at 2v = 64 m/s.
2.Kinematics
Answer: y = 6.375 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Meeting time
Up is positive, the ground is y = 0.
20 − ½g·t² = 12·t − ½g·t² → t = 20/12 = 1.667 s
Meeting height
y = 12·1.667 − ½·9.81·1.667² = 6.375 m
Answer
y = 6.375 m
3.Newton’s laws
Answer: a = 2.781 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 49.05 N
m₁·g·sin θ = 15.76 N
μ·m₁·g·cos θ = 3.757 N
Acceleration of the system
a = (49.05 − 15.76 − 3.757)/7.5 = 3.937 m/s²
Tension from the hanging mass
m2·g − T = m2·a → T = 5·(9.81 − 3.937) = 29.36 N
Answer
T = 29.36 N
5.Projectile motion
Answer: H = 4.995 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 14·cos 45° = 9.899 m/s
vy = v0·sin θ = 14·sin 45° = 9.899 m/s
Highest point
At the top the vertical velocity is zero: vy² = 2gH.
H = vy²/(2g) = 9.899²/(2·9.81) = 4.995 m
Answer
H = 4.995 m
6.Projectile motion
Answer: x = 35.82 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 8.208 m/s, vy = 22.55 m/s
Time to land on the roof
Larger root: the ball is descending.
5 = 22.55·t − 4.905·t²
t = (22.55 + √(22.55² − 2·9.81·5))/9.81 = 4.364 s
Horizontal distance
x = vx·t = 8.208·4.364 = 35.82 m
Answer
x = 35.82 m
7.Circular motion
Answer: n = 18.14 rpm
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces on a rider
N = m·ω²·r
μ·N = m·g → μ·ω²·r = g
Angular speed
ω = √(g/(μ·r)) = √(9.81/(0.8·3.4)) = 1.899 rad/s
Rotation rate
n = ω·60/(2π) = 18.14 rpm
Answer
n = 18.14 rpm
8.Circular motion
Answer: vmin = 2.62 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Tension zero at the top
m·g = m·v²/r → v = √(g·r) = √(9.81·0.7) = 2.62 m/s
Answer
vmin = 2.62 m/s
9.Work & energy
Answer: v = 13.74 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·17·(0.7071 − 0.2·0.7071)) = 13.74 m/s
Answer
v = 13.74 m/s
10.Work & energy
Answer: d = 0.3049 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Spring energy
x = 5 cm = 0.05 m
½kx² = ½·5000·0.05² = 6.25 J
Energy balance along the slope
m·g = 3·9.81 = 29.43 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 6.25/(29.43·(0.5736 + 0.15·0.8192)) = 0.3049 m
Answer
d = 0.3049 m
11.Momentum & collisions
Answer: ΔK = 47570 J
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 800·13/2700 = 3.852 m/s
Kinetic energy before and after
Kbefore = ½·800·13² = 67600 J
Kafter = ½·2700·3.852² = 20030 J
Energy lost
ΔK = 67600 − 20030 = 47570 J
Answer
ΔK = 47570 J
The lost energy goes into deformation, heat and sound.
12.Momentum & collisions
Answer: J = 4.05 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.15·(12 + 15) = 4.05 N·s
Answer
J = 4.05 N·s
13.Rigid-body rotation
Answer: N = 237.1 rev
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·1800/60 = 188.5 rad/s
Work of the brake equals the kinetic energy
½·I·ω² = ½·13·188.5² = 230949 J
θ = 230949/155 = 1490 rad
Revolutions
N = θ/2π = 237.1 rev
Answer
N = 237.1 rev
14.Rigid-body rotation
Answer: n2 = 81.51 rpm
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Moments of inertia
I1 = 3 + 2·3·0.65² = 5.535 kg·m²
I2 = 3 + 2·3·0.35² = 3.735 kg·m²
Conservation of angular momentum
n2 = n1·I1/I2 = 55·5.535/3.735 = 81.51 rpm
Answer
n2 = 81.51 rpm
The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.
15.Gears & gear trains
Answer: n2 = 727.5 rpm
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Speed without slip
1500·200/400 = 750 rpm
With slip
n2 = 750·0.97 = 727.5 rpm
Answer
n2 = 727.5 rpm
16.Gears & gear trains
Answer: Tout = 58.67 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Output speed
nout = 960·(24/32)·(30/36) = 600 rpm
ωout = 2π·600/60 = 62.83 rad/s
Output power and torque
Pout = 4000·0.96² = 3686 W
Tout = Pout/ωout = 3686/62.83 = 58.67 N·m
Answer
Tout = 58.67 N·m
17.Springs & pendulums
Answer: T = 3.172 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Pendulum period
T = 2π·√(2.5/9.81) = 3.172 s
Answer
T = 3.172 s
18.Springs & pendulums
Answer: E = 5.78 J
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(400/0.6) = 25.82 rad/s
Energy
E = ½·k·A² = ½·400·0.17² = 5.78 J
Answer
E = 5.78 J
19.Mechanical vibrations
Answer: ζ = 0.1485
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(25000·20) = 1414 N·s/m
Damping ratio
ζ = c/cc = 210/1414 = 0.1485
Answer
ζ = 0.1485
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: keq = 23.08 kN/m
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.