In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 45 km/h brakes with a constant deceleration of 5.5 m/s² until it stops. Find the braking distance s.
v₀ = 45 km/ha = −5.5 m/s²v = 0
s = m
2.KinematicsHard
A tram starts from rest and accelerates at 1.5 m/s² for 5 s, then runs at constant speed for 10 s, and finally brakes at 5 m/s² until it stops. Find the total travel time t.
a1 = 1.5 m/s²t1 = 5 st2 = 10 sa3 = −5 m/s²
t = s
3.Newton’s lawsMedium
A 30 kg sled is pulled across level snow by a rope at 40° above the horizontal with a force of 160 N. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the sled.
m = 30 kgF = 160 Nθ = 40°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 1.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 6 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 1.5 kgm2 = 6 kgμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched from level ground at 24 m/s and must land 35 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.
v₀ = 24 m/sR = 35 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
A ball is launched at 10 m/s and 30° above the horizontal from the top of a 10 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?
v₀ = 10 m/sθ = 30°h = 10 mg = 9.81 m/s²
α = °
7.Circular motionMedium
A car takes a flat curve of radius 100 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 100 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 1.6 kg ball on a light string 0.8 m long is swung in a vertical circle. At the lowest point its speed is 11.5 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.
An 800 kg car drives up a 5° slope at a constant 90 km/h. Air resistance and rolling resistance together amount to 550 N. Find the power P the wheels must deliver, in kW.
A spring of stiffness 800 N/m at the bottom of a 25° slope is compressed by 5 cm against a 0.5 kg block and released. The coefficient of kinetic friction between block and slope is 0.15. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)
A 5 g bullet is fired horizontally into a 4.5 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 16 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 5 gM = 4.5 kgh = 16 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
A 0.15 kg ball hits a wall at 11 m/s and bounces straight back at 15 m/s. The contact lasts 50 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.15 kgvin = 11 m/svout = 15 m/sΔt = 50 ms
J = N·s
13.Rigid-body rotationMedium
A uniform slender rod of mass 2.5 kg and length 2.1 m is pinned at one end and released from rest in a horizontal position. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.
m = 2.5 kgL = 2.1 mg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
A hollow sphere rolls without slipping down a slope inclined at 10° to the horizontal. Use g = 9.81 m/s². Find the smallest coefficient of static friction μs that prevents it from slipping.
θ = 10°I = (2/3)·m·r²g = 9.81 m/s²
μs =
15.Gears & gear trainsMedium
A 4 kW motor running at 2900 rpm drives a pinion with 12 teeth, which meshes with a gear with 24 teeth. The gear pair has an efficiency of 98%. Find the output torque T2 on the gear shaft.
P = 4 kWn1 = 2900 rpmN1 = 12N2 = 24η = 98%
T2 = N·m
16.Gears & gear trainsHard
An open belt connects an 80 mm driving pulley at 720 rpm to a 315 mm pulley; the centres are 1200 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 2000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).
A simple pendulum has a length of 2 m. Use g = 9.81 m/s². Find its period T for small swings.
L = 2 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
A body oscillates in simple harmonic motion with period 1.4 s and amplitude 10 cm. What is the shortest time t it needs to move from equilibrium to a displacement of 5 cm?
T = 1.4 sA = 10 cmx = 5 cm
t = s
19.Mechanical vibrationsMedium
A 40 kg mass is supported by a spring with a stiffness of 20 kN/m and a viscous damper with a damping coefficient of 540 N·s/m. Find the damping ratio ζ.
m = 40 kgk = 20 kN/mc = 540 N·s/m
ζ =
20.Mechanical vibrationsHard
A 20 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 15 kN/m and the lower one k₂ = 80 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 20 kgk1 = 15 kN/mk2 = 80 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: s = 14.2 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 45/3.6 = 12.5 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·5.5) = 14.2 m
Answer
s = 14.2 m
2.Kinematics
Answer: t = 16.5 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Top speed
v = a1·t1 = 1.5·5 = 7.5 m/s
Braking time
t3 = v/a3 = 7.5/5 = 1.5 s
Total time
t = 5 + 10 + 1.5 = 16.5 s
Answer
t = 16.5 s
3.Newton’s laws
Answer: a = 2.49 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Normal force
N = m·g − F·sin θ = 294.3 − 160·sin 40° = 191.5 N
Horizontal forces
m·a = F·cos θ − μ·N = 122.6 − 47.86
a = 74.7/30 = 2.49 m/s²
Answer
a = 2.49 m/s²
4.Newton’s laws
Answer: T = 12.95 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Range formula
R = v₀²·sin 2θ/g → sin 2θ = 9.81·35/24² = 0.5961
Angle
2θ = 36.59° → θ = 18.3°
Answer
θ = 18.3°
The other solution is 90° − θ = 71.7°.
6.Projectile motion
Answer: α = 59.79 °
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 10·cos 30° = 8.66 m/s
vy0 = 10·sin 30° = 5 m/s
Vertical speed at impact
Energy or v² = v₀² + 2as in the vertical direction.
vy = √(5² + 2·9.81·10) = 14.87 m/s
Impact angle
tan α = vy/vx = 14.87/8.66 → α = 59.79°
Answer
α = 59.79°
7.Circular motion
Answer: vmax = 24.26 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·100) = 24.26 m/s
Answer
vmax = 24.26 m/s (87.34 km/h)
8.Circular motion
Answer: Ttop = 186 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Speed at the top
Kinetic energy is traded for potential energy over a height 2r.
vtop² = 11.5² − 4·9.81·0.8 = 100.9 m²/s²
Forces at the top
Tension and gravity both point down, towards the centre.
T + m·g = m·vtop²/r
T = 1.6·100.9/0.8 − 1.6·9.81 = 186 N
Answer
Ttop = 186 N
9.Work & energy
Answer: P = 30.85 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 800·9.81 = 7848 N
mg·sin θ = 7848·sin 5° = 684 N
F = 684 + 550 = 1234 N
Power
v = 90/3.6 = 25 m/s
P = F·v = 1234·25 = 30850 W = 30.85 kW
Answer
P = 30.85 kW
10.Work & energy
Answer: d = 0.365 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Spring energy
x = 5 cm = 0.05 m
½kx² = ½·800·0.05² = 1 J
Energy balance along the slope
m·g = 0.5·9.81 = 4.905 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 1/(4.905·(0.4226 + 0.15·0.9063)) = 0.365 m
Answer
d = 0.365 m
11.Momentum & collisions
Answer: v = 1596 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Swing after impact
V = √(2·g·h) = √(2·9.81·0.16) = 1.772 m/s
Collision
m·v = (m + M)·V → v = (0.005 + 4.5)·1.772/0.005 = 1596 m/s
Answer
v = 1596 m/s
12.Momentum & collisions
Answer: J = 3.9 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.15·(15 + 11) = 3.9 N·s
Answer
J = 3.9 N·s
13.Rigid-body rotation
Answer: ω = 3.744 rad/s
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Equations of motion
m·g·sin θ − f = m·a
f·r = I·α = 0.6667·m·r²·(a/r) → f = 0.6667·m·a
Acceleration
a = g·sin θ/(1 + c) = 9.81·sin 10°/1.667 = 1.022 m/s²
Friction needed
f = c·m·a ≤ μ·m·g·cos θ → μ ≥ c·tan θ/(1 + c)
μs = 0.6667·tan 10°/1.667 = 0.07053
Answer
μs = 0.07053
15.Gears & gear trains
Answer: T2 = 25.82 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Motor torque
ω₁ = 2π·2900/60 = 303.7 rad/s
T1 = P/ω₁ = 4000/303.7 = 13.17 N·m
Output torque
T2 = 13.17·24/12·0.98 = 25.82 N·m
Answer
T2 = 25.82 N·m
16.Gears & gear trains
Answer: P = 3.143 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Angle of wrap
θ = 2.945 rad
Slack-side tension
eμθ = e0.7364 = 2.088, T₂ = 2000/2.088 = 957.7 N
Power
P = (2000 − 957.7)·3.016 = 3.143 kW
Answer
P = 3.143 kW
17.Springs & pendulums
Answer: T = 2.837 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Pendulum period
T = 2π·√(2/9.81) = 2.837 s
Answer
T = 2.837 s
18.Springs & pendulums
Answer: t = 0.1167 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = 2π/T = 2π/1.4 = 4.488 rad/s
Solve for the time
0.5 = sin(ω·t) → ω·t = arcsin(0.5) = 0.5236 rad
t = 0.5236/4.488 = 0.1167 s
Answer
t = 0.1167 s
19.Mechanical vibrations
Answer: ζ = 0.3019
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(20000·40) = 1789 N·s/m
Damping ratio
ζ = c/cc = 540/1789 = 0.3019
Answer
ζ = 0.3019
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 4 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.