In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 45 km/h brakes with a constant deceleration of 7.5 m/s² until it stops. Find the braking distance s.
v₀ = 45 km/ha = −7.5 m/s²v = 0
s = m
2.KinematicsHard
A ball is thrown straight up at 15 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 15 m/sh₀ = 20 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 30 kg sled is pulled across level snow by a rope at 35° above the horizontal with a force of 170 N. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the sled.
m = 30 kgF = 170 Nθ = 35°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 9.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 9.5 kgm2 = 5 kgμ = 0.3g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 20° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 32 m/sθ = 20°g = 9.81 m/s²
t = s
6.Projectile motionHard
A ball is launched at 30 m/s and 15° above the horizontal from the top of a 55 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the speed v with which it hits the ground.
v₀ = 30 m/sθ = 15°h = 55 mg = 9.81 m/s²
v = m/s
7.Circular motionMedium
A car takes a flat curve of radius 125 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 125 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 0.4 kg ball on a light string 1.5 m long is swung in a vertical circle. At the lowest point its speed is 11 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.
m = 0.4 kgr = 1.5 mvbottom = 11 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
A 1800 kg car drives up a 4° slope at a constant 54 km/h. Air resistance and rolling resistance together amount to 200 N. Find the power P the wheels must deliver, in kW.
A 3 kg block rests on a rough horizontal table (μ = 0.2). A light string runs from it over a smooth pulley at the edge of the table to a hanging 6 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 1.5 m.
m1 = 3 kgm2 = 6 kgμ = 0.2d = 1.5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
A 2.5 kg glider moving at 3 m/s makes a perfectly elastic head-on collision with a 4.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 2.5 kgm2 = 4.5 kgv1 = 3 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
At a crossing a 1000 kg car travelling east at 13 m/s collides with an 800 kg car travelling north at 9 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.
m1 = 1000 kgv1 = 13 m/s (E)m2 = 800 kgv2 = 9 m/s (N)
θ = °
13.Rigid-body rotationMedium
A flywheel with a moment of inertia of 28.5 kg·m² spins at 800 rpm. A brake applies a constant friction torque of 95 N·m. How long t does it take to stop?
I = 28.5 kg·m²n = 800 rpmTb = 95 N·m
t = s
14.Rigid-body rotationHard
A person stands on a frictionless turntable and holds a 4.5 kg dumbbell in each hand, 0.65 m from the axis. The person and turntable alone have a moment of inertia of 3 kg·m² about the axis. They turn at 20 rpm, then pull the dumbbells in to 0.3 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.
Two parallel shafts are 150 mm apart. They must be connected by a pair of spur gears with a module of 5 mm and a speed reduction of 1.5 : 1. How many teeth N1 must the pinion have?
a = 150 mmm = 5 mmi = 1.5
N1 =
16.Gears & gear trainsHard
In a planetary gear set the sun gear has 30 teeth and each planet gear has 30 teeth. The ring gear is held fixed and the sun is driven at 1500 rpm. Find the speed nc of the planet carrier.
Ns = 30Np = 30ns = 1500 rpm
nc = rpm
17.Springs & pendulumsMedium
How long must a simple pendulum be to have a period of 3 s? Use g = 9.81 m/s². Find L.
T = 3 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
A 2.5 kg mass on a spring with k = 160 N/m is pulled 9 cm from equilibrium and released. Find its maximum acceleration amax.
m = 2.5 kgk = 160 N/mA = 9 cm
amax = m/s²
19.Mechanical vibrationsMedium
In a free-vibration test of a damped mass–spring system, a displacement peak of 15 mm is followed one cycle later by a peak of 8 mm. Find the damping ratio ζ.
x0 = 15 mmx1 = 8 mmn = 1
ζ =
20.Mechanical vibrationsHard
A 10 kg mass hangs from spring k₃ = 80 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 80 kN/m and k₂ = 10 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.
m = 10 kgk1 = 80 kN/mk2 = 10 kN/mk3 = 80 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: s = 10.42 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 45/3.6 = 12.5 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·7.5) = 10.42 m
Answer
s = 10.42 m
2.Kinematics
Answer: t = 4.062 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−20 = 15·t − ½·9.81·t²
4.905·t² − 15·t − 20 = 0
Solve the quadratic
Only the positive root is physical.
t = (15 + √(15² + 2·9.81·20))/9.81 = 4.062 s
Answer
t = 4.062 s
3.Newton’s laws
Answer: a = 3.986 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Normal force
N = m·g − F·sin θ = 294.3 − 170·sin 35° = 196.8 N
Horizontal forces
m·a = F·cos θ − μ·N = 139.3 − 19.68
a = 119.6/30 = 3.986 m/s²
Answer
a = 3.986 m/s²
4.Newton’s laws
Answer: a = 1.455 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 32·cos 20° = 30.07 m/s
vy = v0·sin θ = 32·sin 20° = 10.94 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·10.94/9.81 = 2.231 s
Answer
t = 2.231 s
6.Projectile motion
Answer: v = 44.49 m/s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 30·cos 15° = 28.98 m/s
vy0 = 30·sin 15° = 7.765 m/s
Vertical speed at impact
Energy or v² = v₀² + 2as in the vertical direction.
vy = √(7.765² + 2·9.81·55) = 33.75 m/s
Impact speed
v = √(28.98² + 33.75²) = 44.49 m/s
Answer
v = 44.49 m/s
Check with energy: v² = v₀² + 2gh.
7.Circular motion
Answer: vmax = 29.3 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·125) = 29.3 m/s
Answer
vmax = 29.3 m/s (105.5 km/h)
8.Circular motion
Answer: Ttop = 12.65 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Speed at the top
Kinetic energy is traded for potential energy over a height 2r.
vtop² = 11² − 4·9.81·1.5 = 62.14 m²/s²
Forces at the top
Tension and gravity both point down, towards the centre.
T + m·g = m·vtop²/r
T = 0.4·62.14/1.5 − 0.4·9.81 = 12.65 N
Answer
Ttop = 12.65 N
9.Work & energy
Answer: P = 21.48 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 1800·9.81 = 17658 N
mg·sin θ = 17658·sin 4° = 1232 N
F = 1232 + 200 = 1432 N
Power
v = 54/3.6 = 15 m/s
P = F·v = 1432·15 = 21476 W = 21.48 kW
Answer
P = 21.48 kW
10.Work & energy
Answer: v = 4.202 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy released and lost
m₂g·d = 58.86·1.5 = 88.29 J
μ·m₁g·d = 0.2·29.43·1.5 = 8.829 J
Kinetic energy of both blocks
½(m₁ + m₂)v² = 79.46 → v = √(2·79.46/9) = 4.202 m/s
Answer
v = 4.202 m/s
11.Momentum & collisions
Answer: v′1 = −0.8571 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (2.5 − 4.5)/(2.5 + 4.5)·3 = −0.8571 m/s
v′2 = 2·2.5/(2.5 + 4.5)·3 = 2.143 m/s
Answer
v′1 = −0.8571 m/s
The minus sign means the first glider bounces back.
12.Momentum & collisions
Answer: θ = 28.98 °
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum components
px = 1000·13 = 13000 kg·m/s
py = 800·9 = 7200 kg·m/s
Direction
tan θ = py/px = 0.5538 → θ = 28.98°
Answer
θ = 28.98°
13.Rigid-body rotation
Answer: t = 25.13 s
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·800/60 = 83.78 rad/s
Deceleration and time
α = Tb/I = 95/28.5 = 3.333 rad/s²
t = ω/α = 83.78/3.333 = 25.13 s
Answer
t = 25.13 s
14.Rigid-body rotation
Answer: n2 = 35.71 rpm
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Moments of inertia
I1 = 3 + 2·4.5·0.65² = 6.803 kg·m²
I2 = 3 + 2·4.5·0.3² = 3.81 kg·m²
Conservation of angular momentum
n2 = n1·I1/I2 = 20·6.803/3.81 = 35.71 rpm
Answer
n2 = 35.71 rpm
The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.
15.Gears & gear trains
Answer: N1 = 24
Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.
Total number of teeth
N1 + N2 = 2a/m = 2·150/5 = 60
Split by the ratio
N1 = 60/(1 + 1.5) = 24
Answer
N1 = 24
16.Gears & gear trains
Answer: nc = 375 rpm
Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.
Ring gear teeth
Nr = Ns + 2·Np = 30 + 2·30 = 90
Willis equation with the ring fixed
Set nr = 0 and solve for the carrier speed.
(1500 − nc)/(0 − nc) = −90/30
nc = ns·Ns/(Ns + Nr) = 1500·30/120 = 375 rpm
Answer
nc = 375 rpm
The carrier turns in the same direction as the sun.
17.Springs & pendulums
Answer: L = 2.236 m
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for the length
L = g·(T/2π)² = 9.81·(3/2π)² = 2.236 m
Answer
L = 2.236 m
18.Springs & pendulums
Answer: amax = 5.76 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(160/2.5) = 8 rad/s
Maximum acceleration
amax = A·ω² = 0.09·8² = 5.76 m/s²
Answer
amax = 5.76 m/s²
19.Mechanical vibrations
Answer: ζ = 0.09955
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.