In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 120 km/h brakes with a constant deceleration of 6 m/s² until it stops. Find the braking distance s.
v₀ = 120 km/ha = −6 m/s²v = 0
s = m
2.KinematicsHard
A ball is thrown straight up at 9 m/s from the edge of a roof 30 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.
v₀ = 9 m/sh₀ = 30 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A box slides across a level floor with an initial speed of 2 m/s and comes to rest after 4.1 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.
v₀ = 2 m/sd = 4.1 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
A 1 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 4 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 1 kgm2 = 4 kgμ = 0g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 20° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 20 m/sθ = 20°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is launched at 25° above horizontal from the top of a 50 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 24 m/sθ = 25°h = 50 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A road engineer wants cars to take a curve of radius 320 m at 120 km/h without relying on friction. Use g = 9.81 m/s². Find the banking angle θ.
r = 320 mv = 120 km/hg = 9.81 m/s²
θ = °
8.Circular motionHard
A 0.6 kg ball on a light string 0.9 m long is swung in a vertical circle. At the lowest point its speed is 10.5 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.
A 0.5 kg ball hangs on a light string of length 1 m. It is pulled aside until the string makes 45° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.
m = 0.5 kgL = 1 mθ = 45°g = 9.81 m/s²
T = N
10.Work & energyHard
A 2 kg block rests on a rough horizontal table (μ = 0.3). A light string runs from it over a smooth pulley at the edge of the table to a hanging 4 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 2 m.
m1 = 2 kgm2 = 4 kgμ = 0.3d = 2 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
A 15 g bullet is fired horizontally into a 1 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 18 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 15 gM = 1 kgh = 18 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
A 0.2 kg ball hits a wall at 20 m/s and bounces straight back at 14 m/s. The contact lasts 5 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.2 kgvin = 20 m/svout = 14 m/sΔt = 5 ms
J = N·s
13.Rigid-body rotationMedium
A flywheel with a moment of inertia of 34.5 kg·m² spins at 1700 rpm. A brake applies a constant friction torque of 140 N·m. How long t does it take to stop?
I = 34.5 kg·m²n = 1700 rpmTb = 140 N·m
t = s
14.Rigid-body rotationHard
A hollow sphere of mass 11 kg rolls without slipping at 10 m/s. Find its total kinetic energy Ek.
m = 11 kgv = 10 m/sI = (2/3)·m·r²
Ek = J
15.Gears & gear trainsMedium
A worm with 1 start(s) turns at 1440 rpm and drives a worm wheel with 45 teeth. Find the speed nw of the wheel.
z = 1Nw = 45n = 1440 rpm
nw = rpm
16.Gears & gear trainsHard
In a compound gear train, gear A (18 teeth) on the input shaft turning at 2900 rpm drives gear B (24 teeth). Gear C (18 teeth) is fixed to the same shaft as B and drives gear D (60 teeth) on the output shaft. Find the output speed nout.
nin = 2900 rpmA = 18B = 24C = 18D = 60
nout = rpm
17.Springs & pendulumsMedium
How long must a simple pendulum be to have a period of 2.9 s? Use g = 9.81 m/s². Find L.
T = 2.9 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
A 2.9 kg mass on a spring with k = 170 N/m is pulled 18 cm from equilibrium and released. Find the total energy E of the oscillation.
m = 2.9 kgk = 170 N/mA = 18 cm
E = J
19.Mechanical vibrationsMedium
A 25 kg mass on a spring with a stiffness of 150 kN/m has a viscous damper giving a damping ratio of 0.4. Find the damped natural frequency fd of its free vibration in Hz.
m = 25 kgk = 150 kN/mζ = 0.4
fd = Hz
20.Mechanical vibrationsHard
A 10 kg mass hangs from spring k₃ = 25 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 40 kN/m and k₂ = 20 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.
m = 10 kgk1 = 40 kN/mk2 = 20 kN/mk3 = 25 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: s = 92.59 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 120/3.6 = 33.33 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 33.33²/(2·6) = 92.59 m
Answer
s = 92.59 m
2.Kinematics
Answer: hmax = 34.13 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Rise above the roof
0 = v₀² − 2·g·Δh → Δh = 9²/(2·9.81) = 4.128 m
Height above the ground
hmax = 30 + 4.128 = 34.13 m
Answer
hmax = 34.13 m
3.Newton’s laws
Answer: μ = 0.04973
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
a = v₀²/(2d) = 2²/(2·4.1) = 0.4878 m/s²
Friction coefficient
μ·m·g = m·a → μ = a/g = 0.4878/9.81 = 0.04973
Answer
μ = 0.04973
4.Newton’s laws
Answer: T = 7.848 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 20·cos 20° = 18.79 m/s
vy = v0·sin θ = 20·sin 20° = 6.84 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·6.84/9.81 = 1.395 s
Horizontal distance
x = vx·t = 18.79·1.395 = 26.21 m
Answer
x = 26.21 m
6.Projectile motion
Answer: x = 95.49 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 24·cos 25° = 21.75 m/s
vy = v0·sin θ = 24·sin 25° = 10.14 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 50 + 10.14·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (10.14 + √(102.9 + 981))/9.81 = 4.39 s
Horizontal distance
x = vx·t = 21.75·4.39 = 95.49 m
Answer
x = 95.49 m
7.Circular motion
Answer: θ = 19.49 °
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Units
v = 120/3.6 = 33.33 m/s
Banking angle
tan θ = v²/(r·g) = 33.33²/(320·9.81) = 0.3539
θ = 19.49°
Answer
θ = 19.49°
8.Circular motion
Answer: Ttop = 44.07 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Speed at the top
Kinetic energy is traded for potential energy over a height 2r.
vtop² = 10.5² − 4·9.81·0.9 = 74.93 m²/s²
Forces at the top
Tension and gravity both point down, towards the centre.
T + m·g = m·vtop²/r
T = 0.6·74.93/0.9 − 0.6·9.81 = 44.07 N
Answer
Ttop = 44.07 N
9.Work & energy
Answer: T = 7.778 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the bottom
v² = 2gL(1 − cos θ) = 2·9.81·1·(1 − cos 45°) = 5.747 m²/s²
Forces at the bottom
m·g = 0.5·9.81 = 4.905 N
T = mg + mv²/L = 4.905 + 0.5·5.747/1 = 7.778 N
Answer
T = 7.778 N
Check: T = mg(3 − 2cos θ) = 7.778 N.
10.Work & energy
Answer: v = 4.716 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy released and lost
m₂g·d = 39.24·2 = 78.48 J
μ·m₁g·d = 0.3·19.62·2 = 11.77 J
Kinetic energy of both blocks
½(m₁ + m₂)v² = 66.71 → v = √(2·66.71/6) = 4.716 m/s
Answer
v = 4.716 m/s
11.Momentum & collisions
Answer: v = 127.2 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Swing after impact
V = √(2·g·h) = √(2·9.81·0.18) = 1.879 m/s
Collision
m·v = (m + M)·V → v = (0.015 + 1)·1.879/0.015 = 127.2 m/s
Answer
v = 127.2 m/s
12.Momentum & collisions
Answer: J = 6.8 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.2·(14 + 20) = 6.8 N·s
Answer
J = 6.8 N·s
13.Rigid-body rotation
Answer: t = 43.87 s
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·1700/60 = 178 rad/s
Deceleration and time
α = Tb/I = 140/34.5 = 4.058 rad/s²
t = ω/α = 178/4.058 = 43.87 s
Answer
t = 43.87 s
14.Rigid-body rotation
Answer: Ek = 916.7 J
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Wheel speed
nw = n·z/Nw = 1440·1/45 = 32 rpm
Answer
nw = 32 rpm
16.Gears & gear trains
Answer: nout = 652.5 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
First stage
nB = 2900·18/24 = 2175 rpm = nC
Second stage
nout = 2175·18/60 = 652.5 rpm
Answer
nout = 652.5 rpm
total ratio = 4.444 : 1
17.Springs & pendulums
Answer: L = 2.09 m
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for the length
L = g·(T/2π)² = 9.81·(2.9/2π)² = 2.09 m
Answer
L = 2.09 m
18.Springs & pendulums
Answer: E = 2.754 J
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(170/2.9) = 7.656 rad/s
Energy
E = ½·k·A² = ½·170·0.18² = 2.754 J
Answer
E = 2.754 J
19.Mechanical vibrations
Answer: fd = 11.3 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(150000/25) = 77.46 rad/s
fn = 77.46/(2π) = 12.33 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 12.33·√(1 − 0.4²) = 11.3 Hz
Answer
fd = 11.3 Hz
20.Mechanical vibrations
Answer: fn = 6.686 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.