Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)1.5 s30

A driver moving at 108 km/h sees an obstacle. Her reaction time is 1.5 s, after which the car brakes with a constant deceleration of 7 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 108 km/htr = 1.5 sa = −7 m/s²
d = m
2.KinematicsHard
v₀ = 10 m/s35 m

A ball is thrown straight up at 10 m/s from the edge of a roof 35 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 10 m/sh₀ = 35 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 20°20 kgF = ?

A 20 kg box is pushed up a ramp at 20° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the pushing force F.

m = 20 kgθ = 20°μ = 0.1g = 9.81 m/s²
F = N
4.Newton’s lawsHard
m1​ = 4.5 kg4 kgμ = 0.2

A 4.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 4 kg mass. The coefficient of kinetic friction between block and table is 0.2. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 4.5 kgm2 = 4 kgμ = 0.2g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 20 m/s55°rangeH = ?

A ball is launched at 55° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 20 m/sθ = 55°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 25 mv0​ = 26 m/s55°α = ?

A ball is launched at 26 m/s and 55° above the horizontal from the top of a 25 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 26 m/sθ = 55°h = 25 mg = 9.81 m/s²
α = °
7.Circular motionMedium
r = 75 m6 m/s

A 1700 kg car drives over the top of a hump in the road at 6 m/s. The top of the hump is a circular arc of radius 75 m. Use g = 9.81 m/s². Find the normal force N of the road on the car at the top.

m = 1700 kgv = 6 m/sr = 75 mg = 9.81 m/s²
N = N
8.Circular motionHard
r = 1.2 mv = 7.5 m/s

A 1.6 kg ball on a string 1.2 m long is swung in a vertical circle. At the lowest point it moves at 7.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.6 kgr = 1.2 mv = 7.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
0.5 kgk = 200 N/mh = ?

A toy launcher has a vertical spring of stiffness 200 N/m. A 0.5 kg ball is placed on it and the spring is compressed by 10 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.

m = 0.5 kgk = 200 N/mx = 10 cmg = 9.81 m/s²
h = m
10.Work & energyHard
F = 65 N25°μ = 0.258 kg

An 8 kg block starts from rest at the bottom of a 25° slope and is pulled up the slope by a constant force of 65 N parallel to the slope. The coefficient of kinetic friction is 0.25. Find the speed v of the block after it has moved 3 m up the slope.

m = 8 kgF = 65 Nθ = 25°μ = 0.25d = 3 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
4 kg2 m/s2 kg

A 4 kg glider moving at 2 m/s makes a perfectly elastic head-on collision with a 2 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 4 kgm2 = 2 kgv1 = 2 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
1900 kg24 m/s800 kg15 m/sv′ = ?

At a crossing a 1900 kg car travelling east at 24 m/s collides with an 800 kg car travelling north at 15 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.

m1 = 1900 kgv1 = 24 m/s (E)m2 = 800 kgv2 = 15 m/s (N)
v′ = m/s
13.Rigid-body rotationMedium
n = 700 rpmTb​ = 25 N·mI = 9.5 kg·m²

A flywheel with a moment of inertia of 9.5 kg·m² spins at 700 rpm. A brake applies a constant friction torque of 25 N·m. How many revolutions N does the flywheel make before it stops?

I = 9.5 kg·m²n = 700 rpmTb = 25 N·m
N = rev
14.Rigid-body rotationHard
θ = 35°vs = 5 m

A hollow sphere starts from rest and rolls without slipping down a slope inclined at 35° to the horizontal. Use g = 9.81 m/s². Its radius is 0.2 m. Find its angular velocity ω after it has rolled 5 m along the slope.

θ = 35°s = 5 mI = (2/3)·m·r²g = 9.81 m/s²r = 0.2 m
ω = rad/s
15.Gears & gear trainsMedium
N1​ = 30N2​ = 72

An 11 kW motor running at 1500 rpm drives a pinion with 30 teeth, which meshes with a gear with 72 teeth. The gear pair has an efficiency of 97%. Find the output torque T2 on the gear shaft.

P = 11 kWn1 = 1500 rpmN1 = 30N2 = 72η = 97%
T2 = N·m
16.Gears & gear trainsHard
A = 30B = 50C = 30D = 50

In a compound gear train, gear A (30 teeth) on the input shaft turning at 2900 rpm drives gear B (50 teeth). Gear C (30 teeth) is fixed to the same shaft as B and drives gear D (50 teeth) on the output shaft. Find the output speed nout.

nin = 2900 rpmA = 30B = 50C = 30D = 50
nout = rpm
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 3 s? Use g = 9.81 m/s². Find L.

T = 3 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
0.7 kgk = 440 N/mA = 2 cm

A 0.7 kg mass on a spring with k = 440 N/m is pulled 2 cm from equilibrium and released. Find its maximum speed vmax.

m = 0.7 kgk = 440 N/mA = 2 cm
vmax = m/s
19.Mechanical vibrationsMedium
tx15 mm5 cycles0.6 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 15 mm is followed 5 cycles later by a peak of 0.6 mm. Find the damping ratio ζ.

x0 = 15 mmx5 = 0.6 mmn = 5
ζ =
20.Mechanical vibrationsHard
k1​ = 100k2​ = 30m = 25 kg

A 25 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 100 kN/m and k₂ = 30 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 100 kN/mk2 = 30 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 109.3 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 108/3.6 = 30 m/s

Reaction distance

d1 = v₀·tr = 30·1.5 = 45 m

Braking distance

d2 = v₀²/(2a) = 30²/(2·7) = 64.29 m

Total

d = 45 + 64.29 = 109.3 m

Answer

d = 109.3 m
2.Kinematics

Answer: t = 3.879 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−35 = 10·t − ½·9.81·t²
4.905·t² − 10·t − 35 = 0

Solve the quadratic

Only the positive root is physical.

t = (10 + √(10² + 2·9.81·35))/9.81 = 3.879 s

Answer

t = 3.879 s
3.Newton’s laws

Answer: F = 85.54 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Constant speed: the forces balance.

F = m·g·sin θ + μ·m·g·cos θ

Pushing force

F = 67.1 + 18.44 = 85.54 N

Answer

F = 85.54 N
4.Newton’s laws

Answer: a = 3.578 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (39.24 − 8.829)/8.5 = 3.578 m/s²

Answer

a = 3.578 m/s²
5.Projectile motion

Answer: H = 13.68 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 20·cos 55° = 11.47 m/s
vy = v0·sin θ = 20·sin 55° = 16.38 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 16.38²/(2·9.81) = 13.68 m

Answer

H = 13.68 m
6.Projectile motion

Answer: α = 64.11 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 26·cos 55° = 14.91 m/s
vy0 = 26·sin 55° = 21.3 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(21.3² + 2·9.81·25) = 30.73 m/s

Impact angle

tan α = vy/vx = 30.73/14.91 → α = 64.11°

Answer

α = 64.11°
7.Circular motion

Answer: N = 15861 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the top

Towards the centre (down) is positive.

m·g − N = m·v²/r
N = 1700·9.81 − 1700·6²/75 = 16677 − 816 = 15861 N

Answer

N = 15861 N

The car feels lighter: the road pushes up less than its weight.

8.Circular motion

Answer: T = 90.7 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.6·9.81 + 1.6·7.5²/1.2 = 15.7 + 75 = 90.7 N

Answer

T = 90.7 N
9.Work & energy

Answer: h = 0.2039 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 10 cm = 0.1 m
½kx² = ½·200·0.1² = 1 J

Height

m·g = 0.5·9.81 = 4.905 N
h = ½kx²/(mg) = 1/4.905 = 0.2039 m

Answer

h = 0.2039 m
10.Work & energy

Answer: v = 3.246 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 8·9.81 = 78.48 N
mg·sin θ = 33.17 N
μ·mg·cos θ = 17.78 N

Work–energy

½mv² = (65 − 50.95)·3 = 42.15 J
v = √(2·42.15/8) = 3.246 m/s

Answer

v = 3.246 m/s
11.Momentum & collisions

Answer: v′2 = 2.667 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (4 − 2)/(4 + 2)·2 = 0.6667 m/s
v′2 = 2·4/(4 + 2)·2 = 2.667 m/s

Answer

v′2 = 2.667 m/s
12.Momentum & collisions

Answer: v′ = 17.46 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1900·24 = 45600 kg·m/s
py = 800·15 = 12000 kg·m/s

Speed of the wreck

v′ = √(px² + py²)/(m1 + m2) = 47153/2700 = 17.46 m/s

Answer

v′ = 17.46 m/s
13.Rigid-body rotation

Answer: N = 162.5 rev

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·700/60 = 73.3 rad/s

Work of the brake equals the kinetic energy

½·I·ω² = ½·9.5·73.3² = 25524 J
θ = 25524/25 = 1021 rad

Revolutions

N = θ/2π = 162.5 rev

Answer

N = 162.5 rev
14.Rigid-body rotation

Answer: ω = 29.05 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 5·sin 35° = 2.868 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.6667)
v = √(2·9.81·2.868/1.667) = 5.81 m/s
ω = v/r = 5.81/0.2 = 29.05 rad/s

Answer

ω = 29.05 rad/s
15.Gears & gear trains

Answer: T2 = 163 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 11000/157.1 = 70.03 N·m

Output torque

T2 = 70.03·72/30·0.97 = 163 N·m

Answer

T2 = 163 N·m
16.Gears & gear trains

Answer: nout = 1044 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 2900·30/50 = 1740 rpm = nC

Second stage

nout = 1740·30/50 = 1044 rpm

Answer

nout = 1044 rpm

total ratio = 2.778 : 1

17.Springs & pendulums

Answer: L = 2.236 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(3/2π)² = 2.236 m

Answer

L = 2.236 m
18.Springs & pendulums

Answer: vmax = 0.5014 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(440/0.7) = 25.07 rad/s

Maximum speed

vmax = A·ω = 0.02·25.07 = 0.5014 m/s

Answer

vmax = 0.5014 m/s
19.Mechanical vibrations

Answer: ζ = 0.1019

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/5)·ln(15/0.6) = 0.6438

Damping ratio

ζ = δ/√(4π² + δ²) = 0.6438/√(39.48 + 0.4144) = 0.1019

Answer

ζ = 0.1019
20.Mechanical vibrations

Answer: fn = 11.48 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 100 + 30 = 130 kN/m

Natural frequency

ωn = √(130000/25) = 72.11 rad/s
fn = 72.11/(2π) = 11.48 Hz

Answer

fn = 11.48 Hz

ExamProblems · examproblems.com/courses/dynamics