In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 108 km/h brakes with a constant deceleration of 5.5 m/s² until it stops. Find the braking distance s.
v₀ = 108 km/ha = −5.5 m/s²v = 0
s = m
2.KinematicsHard
A stone is dropped from rest into a well. The splash is heard 4 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.
ttotal = 4 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
A box slides across a level floor with an initial speed of 9.5 m/s and comes to rest after 92 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.
v₀ = 9.5 m/sd = 92 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
A 10 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 4.5 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 10 kgm2 = 4.5 kgμ = 0.3g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 25° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.
v0 = 28 m/sθ = 25°g = 9.81 m/s²
H = m
6.Projectile motionHard
A ball is launched at 20° above horizontal from the top of a 40 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 31 m/sθ = 20°h = 40 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A car drives over the top of a hump in the road, which is a circular arc of radius 90 m. Use g = 9.81 m/s². Above what speed vmax do the wheels leave the road at the top?
r = 90 mg = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 1.3 kg ball on a light string 1.4 m long is swung in a vertical circle. At the lowest point its speed is 9.5 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.
m = 1.3 kgr = 1.4 mvbottom = 9.5 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
A car travelling at 30 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.6. Find the stopping distance d.
v = 30 km/hμ = 0.6g = 9.81 m/s²
d = m
10.Work & energyHard
A 0.5 kg cart is released from rest at a height of 11.2 m on a smooth track that leads into a vertical circular loop of radius 4 m. Find the normal force N the track exerts on the cart at the top of the loop.
m = 0.5 kgh = 11.2 mR = 4 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
A 1 kg glider moving at 12 m/s makes a perfectly elastic head-on collision with a 1.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 1 kgm2 = 1.5 kgv1 = 12 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
At a crossing a 1600 kg car travelling east at 23 m/s collides with a 1700 kg car travelling north at 19 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.
m1 = 1600 kgv1 = 23 m/s (E)m2 = 1700 kgv2 = 19 m/s (N)
θ = °
13.Rigid-body rotationMedium
A motor delivers a torque of 1260 N·m at 2800 rpm. Find its power output P in kW.
T = 1260 N·mn = 2800 rpm
P = kW
14.Rigid-body rotationHard
A solid sphere rolls without slipping down a slope inclined at 35° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of its centre.
θ = 35°I = (2/5)·m·r²g = 9.81 m/s²
a = m/s²
15.Gears & gear trainsMedium
Two parallel shafts are 131.3 mm apart. They must be connected by a pair of spur gears with a module of 2.5 mm and a speed reduction of 2.5 : 1. How many teeth N2 must the gear have?
a = 131.3 mmm = 2.5 mmi = 2.5
N2 =
16.Gears & gear trainsHard
An open belt connects an 80 mm driving pulley at 1440 rpm to a 250 mm pulley; the centres are 500 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 1500 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).
An astronaut on another planet finds that a simple pendulum 0.5 m long has a period of 1.49 s for small swings. Find the gravitational acceleration g on that planet.
L = 0.5 mT = 1.49 s
g = m/s²
18.Springs & pendulumsHard
A 0.6 kg mass on a spring with k = 480 N/m is pulled 3 cm from equilibrium and released. Find its maximum speed vmax.
m = 0.6 kgk = 480 N/mA = 3 cm
vmax = m/s
19.Mechanical vibrationsMedium
An 8 kg mass is supported by a spring with a stiffness of 5 kN/m and a viscous damper with a damping coefficient of 60 N·s/m. Find the damping ratio ζ.
m = 8 kgk = 5 kN/mc = 60 N·s/m
ζ =
20.Mechanical vibrationsHard
A 10 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 80 kN/m and the lower one k₂ = 15 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.
m = 10 kgk1 = 80 kN/mk2 = 15 kN/m
keq = kN/m
3Solutions
1.Kinematics
Answer: s = 81.82 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 108/3.6 = 30 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 30²/(2·5.5) = 81.82 m
Answer
s = 81.82 m
2.Kinematics
Answer: d = 70.61 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Two parts of the time
½·9.81·t₁² = 343·(4 − t₁)
4.905·t₁² + 343·t₁ − 1372 = 0
Fall time
Only the positive root is physical.
t₁ = (−343 + √(343² + 4·4.905·1372))/(2·4.905) = 3.794 s
Depth
d = ½·9.81·3.794² = 70.61 m
Answer
d = 70.61 m
3.Newton’s laws
Answer: μ = 0.05
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
a = v₀²/(2d) = 9.5²/(2·92) = 0.4905 m/s²
Friction coefficient
μ·m·g = m·a → μ = a/g = 0.4905/9.81 = 0.05
Answer
μ = 0.05
4.Newton’s laws
Answer: a = 1.015 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 28·cos 25° = 25.38 m/s
vy = v0·sin θ = 28·sin 25° = 11.83 m/s
Highest point
At the top the vertical velocity is zero: vy² = 2gH.
H = vy²/(2g) = 11.83²/(2·9.81) = 7.137 m
Answer
H = 7.137 m
6.Projectile motion
Answer: x = 120.4 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 31·cos 20° = 29.13 m/s
vy = v0·sin θ = 31·sin 20° = 10.6 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 40 + 10.6·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (10.6 + √(112.4 + 784.8))/9.81 = 4.134 s
Horizontal distance
x = vx·t = 29.13·4.134 = 120.4 m
Answer
x = 120.4 m
7.Circular motion
Answer: vmax = 29.71 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Normal force zero
m·g = m·v²/r → v = √(g·r) = √(9.81·90) = 29.71 m/s
Answer
vmax = 29.71 m/s
(107 km/h)
8.Circular motion
Answer: Ttop = 20.04 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Speed at the top
Kinetic energy is traded for potential energy over a height 2r.
vtop² = 9.5² − 4·9.81·1.4 = 35.31 m²/s²
Forces at the top
Tension and gravity both point down, towards the centre.
T + m·g = m·vtop²/r
T = 1.3·35.31/1.4 − 1.3·9.81 = 20.04 N
Answer
Ttop = 20.04 N
9.Work & energy
Answer: d = 5.899 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Speed in base units
v = 30/3.6 = 8.333 m/s
Energy balance
½mv² = μmg·d → d = v²/(2μg) = 8.333²/(2·0.6·9.81) = 5.899 m
Answer
d = 5.899 m
Doubling the speed makes the stopping distance four times longer.
10.Work & energy
Answer: N = 2.943 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(11.2 − 8) = 62.78 m²/s²
Forces at the top
m·g = 0.5·9.81 = 4.905 N
N = mv²/R − mg = 0.5·62.78/4 − 4.905 = 2.943 N
Answer
N = 2.943 N
The cart just makes it round when h = 2.5R; then N = 0 at the top.
11.Momentum & collisions
Answer: v′1 = −2.4 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (1 − 1.5)/(1 + 1.5)·12 = −2.4 m/s
v′2 = 2·1/(1 + 1.5)·12 = 9.6 m/s
Answer
v′1 = −2.4 m/s
The minus sign means the first glider bounces back.
12.Momentum & collisions
Answer: θ = 41.27 °
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum components
px = 1600·23 = 36800 kg·m/s
py = 1700·19 = 32300 kg·m/s
Direction
tan θ = py/px = 0.8777 → θ = 41.27°
Answer
θ = 41.27°
13.Rigid-body rotation
Answer: P = 369.5 kW
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·2800/60 = 293.2 rad/s
Power
P = T·ω = 1260·293.2 = 369451 W = 369.5 kW
Answer
P = 369.5 kW
14.Rigid-body rotation
Answer: a = 4.019 m/s²
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Equations of motion
m·g·sin θ − f = m·a
f·r = I·α = 0.4·m·r²·(a/r) → f = 0.4·m·a
Acceleration
a = g·sin θ/(1 + c) = 9.81·sin 35°/1.4 = 4.019 m/s²
Answer
a = 4.019 m/s²
15.Gears & gear trains
Answer: N2 = 75
Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.
Total number of teeth
N1 + N2 = 2a/m = 2·131.3/2.5 = 105
Split by the ratio
N1 = 105/(1 + 2.5) = 30
N2 = 2.5·30 = 75
Answer
N2 = 75
16.Gears & gear trains
Answer: P = 4.555 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Angle of wrap
θ = 2.8 rad
Slack-side tension
eμθ = e0.7 = 2.014, T₂ = 1500/2.014 = 744.9 N
Power
P = (1500 − 744.9)·6.032 = 4.555 kW
Answer
P = 4.555 kW
17.Springs & pendulums
Answer: g = 8.891 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for g
g = 4π²·L/T² = 4π²·0.5/1.49² = 8.891 m/s²
Answer
g = 8.891 m/s²
18.Springs & pendulums
Answer: vmax = 0.8485 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(480/0.6) = 28.28 rad/s
Maximum speed
vmax = A·ω = 0.03·28.28 = 0.8485 m/s
Answer
vmax = 0.8485 m/s
19.Mechanical vibrations
Answer: ζ = 0.15
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(5000·8) = 400 N·s/m
Damping ratio
ζ = c/cc = 60/400 = 0.15
Answer
ζ = 0.15
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: keq = 12.63 kN/m
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.