In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 100 km/h brakes with a constant deceleration of 7.5 m/s² until it stops. How long does braking take? Find t.
v₀ = 100 km/ha = −7.5 m/s²v = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 18 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 18 m/sh₀ = 15 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
Masses of 5.5 kg and 4 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the acceleration a of the masses.
m1 = 5.5 kgm2 = 4 kgg = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 1.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3.5 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 1.5 kgm2 = 3.5 kgμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is kicked from level ground at 26 m/s and 45° above the horizontal towards a wall 14 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 26 m/sθ = 45°x = 14 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is launched at 20° above horizontal from the top of a 60 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 30 m/sθ = 20°h = 60 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A car takes a flat curve of radius 145 m. The coefficient of static friction between tyres and road is 0.3. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 145 mμs = 0.3g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 3 kg cart is released from rest at a height of 3.4 m on a frictionless track and runs through a vertical loop of radius 1 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.
m = 3 kgh = 3.4 mR = 1 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
A 5 kg block slides 8 m down a slope at 30° to the horizontal, with a coefficient of kinetic friction of 0.35. Find the work Wf done against friction.
m = 5 kgθ = 30°μ = 0.35d = 8 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
A 2 kg block is released from rest at height 2.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1 m long (μ = 0.25) and then runs onto a spring (k = 500 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 2 kgh = 2.5 mL = 1 mμ = 0.25k = 500 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
A 12 g bullet is fired horizontally into a 3 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 10 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 12 gM = 3 kgh = 10 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
A 5 g bullet is fired horizontally into a 4.5 kg block hanging from light strings 2 m long, and stays in it. The strings swing out to a largest angle of 40° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 5 gM = 4.5 kgL = 2 mθ = 40°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
A flywheel with a moment of inertia of 20 kg·m² spins at 800 rpm. A brake applies a constant friction torque of 130 N·m. How long t does it take to stop?
I = 20 kg·m²n = 800 rpmTb = 130 N·m
t = s
14.Rigid-body rotationHard
A solid cylinder of mass 2 kg rolls without slipping at 4 m/s. Find its rotational kinetic energy Erot.
m = 2 kgv = 4 m/sI = ½·m·r²
Erot = J
15.Gears & gear trainsMedium
A belt runs on a 120 mm driving pulley at 1440 rpm. The tension is 500 N on the tight side and 250 N on the slack side. Find the power P transmitted, in kW.
d1 = 120 mmn1 = 1440 rpmT1 = 500 NT2 = 250 N
P = kW
16.Gears & gear trainsHard
An open belt connects a 160 mm pulley and a 250 mm pulley whose centres are 500 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.
d1 = 160 mmd2 = 250 mmC = 500 mm
θ = °
17.Springs & pendulumsMedium
How long must a simple pendulum be to have a period of 2 s? Use g = 9.81 m/s². Find L.
T = 2 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
A 0.5 kg mass on a spring with k = 180 N/m is pulled 14 cm from equilibrium and released. Find the total energy E of the oscillation.
m = 0.5 kgk = 180 N/mA = 14 cm
E = J
19.Mechanical vibrationsMedium
A 40 kg mass is supported by a spring with a stiffness of 80 kN/m and a viscous damper with a damping coefficient of 720 N·s/m. Find the damping ratio ζ.
m = 40 kgk = 80 kN/mc = 720 N·s/m
ζ =
20.Mechanical vibrationsHard
A 10 kg mass hangs from spring k₃ = 5 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 80 kN/m and k₂ = 50 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.
m = 10 kgk1 = 80 kN/mk2 = 50 kN/mk3 = 5 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: t = 3.704 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 100/3.6 = 27.78 m/s
Braking time
0 = v₀ − a·t → t = v₀/a = 27.78/7.5 = 3.704 s
Answer
t = 3.704 s
2.Kinematics
Answer: t = 4.37 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−15 = 18·t − ½·9.81·t²
4.905·t² − 18·t − 15 = 0
Solve the quadratic
Only the positive root is physical.
t = (18 + √(18² + 2·9.81·15))/9.81 = 4.37 s
Answer
t = 4.37 s
3.Newton’s laws
Answer: a = 1.549 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Acceleration
The net driving force is the difference of the weights; it moves the total mass.
a = (5.5 − 4)·9.81/(5.5 + 4) = 1.549 m/s²
Answer
a = 1.549 m/s²
4.Newton’s laws
Answer: T = 13.39 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 26·cos 45° = 18.38 m/s
t = x/vx = 14/18.38 = 0.7615 s
Height at that time
y = 18.38·0.7615 − ½·9.81·0.7615² = 11.16 m
Answer
y = 11.16 m
The ball is still rising at the wall.
6.Projectile motion
Answer: t = 4.696 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 30·cos 20° = 28.19 m/s
vy = v0·sin θ = 30·sin 20° = 10.26 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 60 + 10.26·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (10.26 + √(105.3 + 1177))/9.81 = 4.696 s
Answer
t = 4.696 s
7.Circular motion
Answer: vmax = 20.66 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.3·9.81·145) = 20.66 m/s
Answer
vmax = 20.66 m/s (74.37 km/h)
8.Circular motion
Answer: Nbottom = 229.6 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Speed from energy conservation
v² = 2·9.81·3.4 = 66.71 m²/s²
Forces
Towards the centre is positive.
N = m·v²/R + m·g = 3·66.71/1 + 29.43 = 229.6 N
Answer
Nbottom = 229.6 N
9.Work & energy
Answer: Wf = 118.9 J
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Friction force
N = mg·cos θ = 49.05·0.866 = 42.48 N
F = μN = 0.35·42.48 = 14.87 N
Work against friction
Wf = F·d = 14.87·8 = 118.9 J
Answer
Wf = 118.9 J
10.Work & energy
Answer: x = 42.02 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 19.62·(2.5 − 0.25·1) = 44.15 J
Maximum compression
½kx² = 44.15 → x = √(2·44.15/500) = 0.4202 m = 42.02 cm
Answer
x = 42.02 cm
11.Momentum & collisions
Answer: v = 351.6 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Swing after impact
V = √(2·g·h) = √(2·9.81·0.1) = 1.401 m/s
Collision
m·v = (m + M)·V → v = (0.012 + 3)·1.401/0.012 = 351.6 m/s
Answer
v = 351.6 m/s
12.Momentum & collisions
Answer: v = 2730 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 2·(1 − cos 40°) = 0.4679 m
Speed after impact
V = √(2·9.81·0.4679) = 3.03 m/s
Collision
v = (m + M)·V/m = 4.505·3.03/0.005 = 2730 m/s
Answer
v = 2730 m/s
13.Rigid-body rotation
Answer: t = 12.89 s
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·800/60 = 83.78 rad/s
Deceleration and time
α = Tb/I = 130/20 = 6.5 rad/s²
t = ω/α = 83.78/6.5 = 12.89 s
Answer
t = 12.89 s
14.Rigid-body rotation
Answer: Erot = 8 J
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Translational and rotational parts
Etrans = ½·m·v² = ½·2·4² = 16 J
Erot = ½·I·ω² = ½·0.5·m·r²·(v/r)² = 0.5·16 = 8 J
Answer
Erot = 8 J
15.Gears & gear trains
Answer: P = 2.262 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt speed
v = 9.048 m/s
Power
P = (500 − 250)·9.048 = 2262 W = 2.262 kW
Answer
P = 2.262 kW
16.Gears & gear trains
Answer: θ = 169.7 °
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt angle
asin(0.09) = 5.164°
Angle of wrap
θ = 180 − 2·5.164 = 169.7°
Answer
θ = 169.7°
17.Springs & pendulums
Answer: L = 0.994 m
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for the length
L = g·(T/2π)² = 9.81·(2/2π)² = 0.994 m
Answer
L = 0.994 m
18.Springs & pendulums
Answer: E = 1.764 J
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(180/0.5) = 18.97 rad/s
Energy
E = ½·k·A² = ½·180·0.14² = 1.764 J
Answer
E = 1.764 J
19.Mechanical vibrations
Answer: ζ = 0.2012
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(80000·40) = 3578 N·s/m
Damping ratio
ζ = c/cc = 720/3578 = 0.2012
Answer
ζ = 0.2012
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 3.492 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.