In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A plane starts from rest and accelerates uniformly at 3.25 m/s² along a runway. Find its speed v after 900 m.
v₀ = 0a = 3.25 m/s²s = 900 m
v = m/s
2.KinematicsHard
A ball is thrown straight up at 20 m/s from the edge of a roof 10 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 20 m/sh₀ = 10 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 12 kg block slides down a frictionless slope at 30° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 12 kgθ = 30°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 4.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 4.5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 4.5 kgm2 = 4.5 kgμ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is kicked from level ground at 10 m/s and 40° above the horizontal towards a wall 8 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 10 m/sθ = 40°x = 8 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is launched at 35° above horizontal from the top of a 50 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 27 m/sθ = 35°h = 50 mg = 9.81 m/s²
x = m
7.Circular motionMedium
An 800 kg car drives over the top of a hump in the road at 12 m/s. The top of the hump is a circular arc of radius 45 m. Use g = 9.81 m/s². Find the normal force N of the road on the car at the top.
m = 800 kgv = 12 m/sr = 45 mg = 9.81 m/s²
N = N
8.Circular motionHard
A 0.2 kg ball on a string 0.9 m long is swung in a vertical circle. At the lowest point it moves at 9 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 0.2 kgr = 0.9 mv = 9 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
A toy launcher has a vertical spring of stiffness 1500 N/m. A 0.2 kg ball is placed on it and the spring is compressed by 8 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.
m = 0.2 kgk = 1500 N/mx = 8 cmg = 9.81 m/s²
h = m
10.Work & energyHard
A 5 kg cart is released from rest at a height of 8.4 m on a smooth track that leads into a vertical circular loop of radius 3 m. Find the speed v of the cart at the top of the loop.
m = 5 kgh = 8.4 mR = 3 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
A 2 kg glider moving at 9 m/s makes a perfectly elastic head-on collision with a 0.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 2 kgm2 = 0.5 kgv1 = 9 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
At a crossing a 1300 kg car travelling east at 15 m/s collides with a 1800 kg car travelling north at 8 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.
m1 = 1300 kgv1 = 15 m/s (E)m2 = 1800 kgv2 = 8 m/s (N)
θ = °
13.Rigid-body rotationMedium
A flywheel with a moment of inertia of 39 kg·m² spins at 2100 rpm. A brake applies a constant friction torque of 170 N·m. How long t does it take to stop?
I = 39 kg·m²n = 2100 rpmTb = 170 N·m
t = s
14.Rigid-body rotationHard
A person stands on a frictionless turntable and holds a 3 kg dumbbell in each hand, 0.8 m from the axis. The person and turntable alone have a moment of inertia of 4 kg·m² about the axis. They turn at 50 rpm, then pull the dumbbells in to 0.15 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.
A 4 kW motor running at 2900 rpm drives a pinion with 16 teeth and a module of 2.5 mm. Find the tangential force Ft on the pinion teeth.
P = 4 kWn = 2900 rpmN1 = 16m = 2.5 mm
Ft = N
16.Gears & gear trainsHard
An open belt connects a 125 mm pulley and a 450 mm pulley whose centres are 1200 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.
d1 = 125 mmd2 = 450 mmC = 1200 mm
θ = °
17.Springs & pendulumsMedium
A 3 kg mass on a spring with k = 120 N/m oscillates on a frictionless surface with an amplitude of 10 cm. Find its speed v when it is 5 cm from equilibrium.
m = 3 kgk = 120 N/mA = 10 cmx = 5 cm
v = m/s
18.Springs & pendulumsHard
A 3.3 kg mass on a spring with k = 420 N/m is pulled 7 cm from equilibrium and released. Find its maximum acceleration amax.
m = 3.3 kgk = 420 N/mA = 7 cm
amax = m/s²
19.Mechanical vibrationsMedium
In a free-vibration test of a damped mass–spring system, a displacement peak of 10 mm is followed 2 cycles later by a peak of 6 mm. Find the damping ratio ζ.
x0 = 10 mmx2 = 6 mmn = 2
ζ =
20.Mechanical vibrationsHard
A 40 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 30 kN/m and the lower one k₂ = 40 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 40 kgk1 = 30 kN/mk2 = 40 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: v = 76.49 m/s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Speed after the distance
v = √(2·a·s) = √(2·3.25·900) = 76.49 m/s
Answer
v = 76.49 m/s
(275.3 km/h)
2.Kinematics
Answer: t = 4.528 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−10 = 20·t − ½·9.81·t²
4.905·t² − 20·t − 10 = 0
Solve the quadratic
Only the positive root is physical.
t = (20 + √(20² + 2·9.81·10))/9.81 = 4.528 s
Answer
t = 4.528 s
3.Newton’s laws
Answer: a = 4.905 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 10·cos 40° = 7.66 m/s
t = x/vx = 8/7.66 = 1.044 s
Height at that time
y = 6.428·1.044 − ½·9.81·1.044² = 1.363 m
Answer
y = 1.363 m
The ball is already on its way down at the wall.
6.Projectile motion
Answer: x = 113.7 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 27·cos 35° = 22.12 m/s
vy = v0·sin θ = 27·sin 35° = 15.49 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 50 + 15.49·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (15.49 + √(239.8 + 981))/9.81 = 5.14 s
Horizontal distance
x = vx·t = 22.12·5.14 = 113.7 m
Answer
x = 113.7 m
7.Circular motion
Answer: N = 5288 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the top
Towards the centre (down) is positive.
m·g − N = m·v²/r
N = 800·9.81 − 800·12²/45 = 7848 − 2560 = 5288 N
Answer
N = 5288 N
The car feels lighter: the road pushes up less than its weight.
8.Circular motion
Answer: T = 19.96 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 0.2·9.81 + 0.2·9²/0.9 = 1.962 + 18 = 19.96 N
Answer
T = 19.96 N
9.Work & energy
Answer: h = 2.446 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Spring energy
x = 8 cm = 0.08 m
½kx² = ½·1500·0.08² = 4.8 J
Height
m·g = 0.2·9.81 = 1.962 N
h = ½kx²/(mg) = 4.8/1.962 = 2.446 m
Answer
h = 2.446 m
10.Work & energy
Answer: v = 6.862 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(8.4 − 6) = 47.09 m²/s²
v = 6.862 m/s
Answer
v = 6.862 m/s
The cart just makes it round when h = 2.5R; then N = 0 at the top.
11.Momentum & collisions
Answer: v′2 = 14.4 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (2 − 0.5)/(2 + 0.5)·9 = 5.4 m/s
v′2 = 2·2/(2 + 0.5)·9 = 14.4 m/s
Answer
v′2 = 14.4 m/s
12.Momentum & collisions
Answer: θ = 36.44 °
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum components
px = 1300·15 = 19500 kg·m/s
py = 1800·8 = 14400 kg·m/s
Direction
tan θ = py/px = 0.7385 → θ = 36.44°
Answer
θ = 36.44°
13.Rigid-body rotation
Answer: t = 50.45 s
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·2100/60 = 219.9 rad/s
Deceleration and time
α = Tb/I = 170/39 = 4.359 rad/s²
t = ω/α = 219.9/4.359 = 50.45 s
Answer
t = 50.45 s
14.Rigid-body rotation
Answer: n2 = 94.8 rpm
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Moments of inertia
I1 = 4 + 2·3·0.8² = 7.84 kg·m²
I2 = 4 + 2·3·0.15² = 4.135 kg·m²
Conservation of angular momentum
n2 = n1·I1/I2 = 50·7.84/4.135 = 94.8 rpm
Answer
n2 = 94.8 rpm
The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.
15.Gears & gear trains
Answer: Ft = 658.6 N
Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.
Torque on the pinion
ω = 2π·2900/60 = 303.7 rad/s
T = P/ω = 4000/303.7 = 13.17 N·m
Pitch diameter
d = m·N = 2.5·16 = 40 mm
Tangential force
Ft = 2T/d = 2·13.17/0.04 = 658.6 N
Answer
Ft = 658.6 N
16.Gears & gear trains
Answer: θ = 164.4 °
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt angle
asin(0.1354) = 7.783°
Angle of wrap
θ = 180 − 2·7.783 = 164.4°
Answer
θ = 164.4°
17.Springs & pendulums
Answer: v = 0.5477 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(120/3) = 6.325 rad/s
Speed at x
v = ω·√(A² − x²) = 6.325·√(0.1² − 0.05²) = 0.5477 m/s
Answer
v = 0.5477 m/s
18.Springs & pendulums
Answer: amax = 8.909 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(420/3.3) = 11.28 rad/s
Maximum acceleration
amax = A·ω² = 0.07·11.28² = 8.909 m/s²
Answer
amax = 8.909 m/s²
19.Mechanical vibrations
Answer: ζ = 0.04062
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.