In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A driver moving at 90 km/h sees an obstacle. Her reaction time is 1.4 s, after which the car brakes with a constant deceleration of 7.5 m/s². Find the total stopping distance d from the moment she sees the obstacle.
v₀ = 90 km/htr = 1.4 sa = −7.5 m/s²
d = m
2.KinematicsHard
A ball is thrown straight up at 5 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 5 m/sh₀ = 15 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 5 kg sled is pulled across level snow by a rope at 30° above the horizontal with a force of 40 N. The coefficient of kinetic friction is 0.4. Use g = 9.81 m/s². Find the acceleration a of the sled.
m = 5 kgF = 40 Nθ = 30°μ = 0.4g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 145 N pulls the front 5 kg block; the 4 kg block is towed behind. The coefficient of kinetic friction is 0.1 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.
m1 = 4 kgm2 = 5 kgF = 145 Nμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 45° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.
v0 = 30 m/sθ = 45°g = 9.81 m/s²
H = m
6.Projectile motionHard
A ball is launched at 15 m/s and 55° above the horizontal from the top of a 40 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.
v₀ = 15 m/sθ = 55°h = 40 mg = 9.81 m/s²
H = m
7.Circular motionMedium
A small ball on a string of length 0.5 m moves in a horizontal circle so that the string makes a constant angle of 35° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the time T for one revolution.
L = 0.5 mθ = 35°g = 9.81 m/s²
T = s
8.Circular motionHard
A curve of radius 200 m is banked at 8°, and the coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.
r = 200 mθ = 8°μs = 0.4g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
A 0.2 kg ball hangs on a light string of length 3 m. It is pulled aside until the string makes 50° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.
m = 0.2 kgL = 3 mθ = 50°g = 9.81 m/s²
T = N
10.Work & energyHard
A 0.5 kg cart is released from rest at a height of 6.5 m on a smooth track that leads into a vertical circular loop of radius 2.5 m. Find the speed v of the cart at the top of the loop.
m = 0.5 kgh = 6.5 mR = 2.5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
A 10 g bullet is fired horizontally into a 3 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 17 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 10 gM = 3 kgh = 17 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
A 0.3 kg ball hits a wall at 21 m/s and bounces straight back at 14 m/s. The contact lasts 5 ms. Find the average force Favg of the wall on the ball.
m = 0.3 kgvin = 21 m/svout = 14 m/sΔt = 5 ms
Favg = N
13.Rigid-body rotationMedium
A uniform slender rod of mass 18 kg and length 1.8 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find its angular acceleration α just after release.
m = 18 kgL = 1.8 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
A hollow sphere starts from rest and rolls without slipping down a slope inclined at 40° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 6.5 m along the slope.
θ = 40°s = 6.5 mI = (2/3)·m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
A worm with 1 start(s) turns at 960 rpm and drives a worm wheel with 50 teeth. Find the speed nw of the wheel.
z = 1Nw = 50n = 960 rpm
nw = rpm
16.Gears & gear trainsHard
A 15 kW motor at 2900 rpm drives gear A (30 teeth), which meshes with gear B (36 teeth). Gear C (32 teeth) on the same shaft as B drives gear D (48 teeth) on the output shaft. Each gear mesh has an efficiency of 97%. Find the output torque Tout.
An astronaut on another planet finds that a simple pendulum 1.4 m long has a period of 3.85 s for small swings. Find the gravitational acceleration g on that planet.
L = 1.4 mT = 3.85 s
g = m/s²
18.Springs & pendulumsHard
A 2.6 kg mass on a spring with k = 370 N/m is pulled 8 cm from equilibrium and released. Find the total energy E of the oscillation.
m = 2.6 kgk = 370 N/mA = 8 cm
E = J
19.Mechanical vibrationsMedium
A 5 kg mass on a spring with a stiffness of 50 kN/m has a viscous damper giving a damping ratio of 0.45. Find the damped natural frequency fd of its free vibration in Hz.
m = 5 kgk = 50 kN/mζ = 0.45
fd = Hz
20.Mechanical vibrationsHard
A 5 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 80 kN/m and k₂ = 50 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 5 kgk1 = 80 kN/mk2 = 50 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: d = 76.67 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 90/3.6 = 25 m/s
Reaction distance
d1 = v₀·tr = 25·1.4 = 35 m
Braking distance
d2 = v₀²/(2a) = 25²/(2·7.5) = 41.67 m
Total
d = 35 + 41.67 = 76.67 m
Answer
d = 76.67 m
2.Kinematics
Answer: t = 2.331 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−15 = 5·t − ½·9.81·t²
4.905·t² − 5·t − 15 = 0
Solve the quadratic
Only the positive root is physical.
t = (5 + √(5² + 2·9.81·15))/9.81 = 2.331 s
Answer
t = 2.331 s
3.Newton’s laws
Answer: a = 4.604 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Normal force
N = m·g − F·sin θ = 49.05 − 40·sin 30° = 29.05 N
Horizontal forces
m·a = F·cos θ − μ·N = 34.64 − 11.62
a = 23.02/5 = 4.604 m/s²
Answer
a = 4.604 m/s²
4.Newton’s laws
Answer: T = 64.44 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).
5.Projectile motion
Answer: H = 22.94 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 30·cos 45° = 21.21 m/s
vy = v0·sin θ = 30·sin 45° = 21.21 m/s
Highest point
At the top the vertical velocity is zero: vy² = 2gH.
H = vy²/(2g) = 21.21²/(2·9.81) = 22.94 m
Answer
H = 22.94 m
6.Projectile motion
Answer: H = 47.7 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Vertical launch speed
vy = 15·sin 55° = 12.29 m/s
Rise above the cliff
Δh = vy²/(2g) = 12.29²/(2·9.81) = 7.695 m
Height above the ground
H = 40 + 7.695 = 47.7 m
Answer
H = 47.7 m
7.Circular motion
Answer: T = 1.284 s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Radius of the circle
r = L·sin θ = 0.5·sin 35° = 0.2868 m
Speed
Tension and gravity together give the inward force: tan θ = v²/(r·g).
v = √(r·g·tan θ) = √(0.2868·9.81·tan 35°) = 1.404 m/s
Period
T = 2π·r/v = 2π·0.2868/1.404 = 1.284 s
Answer
T = 1.284 s
8.Circular motion
Answer: vmax = 33.52 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Force balances
Friction points down the slope.
N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g
Speed
v = √(200·9.81·0.5353/0.9346) = 33.52 m/s
Answer
vmax = 33.52 m/s
(120.7 km/h)
9.Work & energy
Answer: T = 3.364 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the bottom
v² = 2gL(1 − cos θ) = 2·9.81·3·(1 − cos 50°) = 21.03 m²/s²
Forces at the bottom
m·g = 0.2·9.81 = 1.962 N
T = mg + mv²/L = 1.962 + 0.2·21.03/3 = 3.364 N
Answer
T = 3.364 N
Check: T = mg(3 − 2cos θ) = 3.364 N.
10.Work & energy
Answer: v = 5.425 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(6.5 − 5) = 29.43 m²/s²
v = 5.425 m/s
Answer
v = 5.425 m/s
The cart just makes it round when h = 2.5R; then N = 0 at the top.
11.Momentum & collisions
Answer: v = 549.7 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Swing after impact
V = √(2·g·h) = √(2·9.81·0.17) = 1.826 m/s
Collision
m·v = (m + M)·V → v = (0.01 + 3)·1.826/0.01 = 549.7 m/s
Answer
v = 549.7 m/s
12.Momentum & collisions
Answer: Favg = 2100 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.3·(14 + 21) = 10.5 N·s
Average force
Favg = J/Δt = 10.5/0.005 = 2100 N
Answer
Favg = 2100 N
13.Rigid-body rotation
Answer: α = 8.175 rad/s²
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Moments about the pin
At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Height dropped
h = s·sin θ = 6.5·sin 40° = 4.178 m
Energy balance with rolling
Rolling without slipping: ω = v/r, and friction does no work at the contact point.
m·g·h = ½·m·v²·(1 + 0.6667)
v = √(2·9.81·4.178/1.667) = 7.013 m/s
Answer
v = 7.013 m/s
15.Gears & gear trains
Answer: nw = 19.2 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Wheel speed
nw = n·z/Nw = 960·1/50 = 19.2 rpm
Answer
nw = 19.2 rpm
16.Gears & gear trains
Answer: Tout = 83.65 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Output speed
nout = 2900·(30/36)·(32/48) = 1611 rpm
ωout = 2π·1611/60 = 168.7 rad/s
Output power and torque
Pout = 15000·0.97² = 14114 W
Tout = Pout/ωout = 14114/168.7 = 83.65 N·m
Answer
Tout = 83.65 N·m
17.Springs & pendulums
Answer: g = 3.729 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for g
g = 4π²·L/T² = 4π²·1.4/3.85² = 3.729 m/s²
Answer
g = 3.729 m/s²
18.Springs & pendulums
Answer: E = 1.184 J
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(370/2.6) = 11.93 rad/s
Energy
E = ½·k·A² = ½·370·0.08² = 1.184 J
Answer
E = 1.184 J
19.Mechanical vibrations
Answer: fd = 14.21 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(50000/5) = 100 rad/s
fn = 100/(2π) = 15.92 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 15.92·√(1 − 0.45²) = 14.21 Hz
Answer
fd = 14.21 Hz
20.Mechanical vibrations
Answer: fn = 25.66 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.