Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)5.051 s27.78

A car driving at 100 km/h brakes with a constant deceleration of 5.5 m/s² until it stops. Find the braking distance s.

v₀ = 100 km/ha = −5.5 m/s²v = 0
s = m
2.KinematicsHard
a = 32 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 32 m/s² for 2 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 32 m/s²t1 = 2 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 20°a = ?m = 20 kg

A 20 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 20 kgθ = 20°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 15°blockv₀ = 5 m/s

A block is given a push so that it starts sliding up a ramp at 15° with a speed of 5 m/s. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 5 m/sθ = 15°μ = 0.3g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 26 m/sθ = ?R = 60 m

A ball is launched from level ground at 26 m/s and must land 60 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 26 m/sR = 60 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 15 mv0​ = 16 m/s40°range

A ball is launched at 40° above horizontal from the top of a 15 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 16 m/sθ = 40°h = 15 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 110 mvmax​ = ?

A car takes a flat curve of radius 110 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 110 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.8 mv = 3 m/s

A 1.9 kg ball on a string 0.8 m long is swung in a vertical circle. At the lowest point it moves at 3 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.9 kgr = 0.8 mv = 3 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
35°d = 15 mμ = 0.15

A block slides from rest down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 15 m along the slope.

θ = 35°μ = 0.15d = 15 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 1.5 mL = 2.5 mμ = 0.3k = 1000 N/m

A 2.5 kg block is released from rest at height 1.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.3) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 2.5 kgh = 1.5 mL = 2.5 mμ = 0.3k = 1000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
1100 kg8 m/s700 kg

A 1100 kg car moving at 8 m/s runs into a stationary 700 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 1100 kgv1 = 8 m/sm2 = 700 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
1.5 kgv = ?15 g40°L = 1.5 m

A 15 g bullet is fired horizontally into a 1.5 kg block hanging from light strings 1.5 m long, and stays in it. The strings swing out to a largest angle of 40° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 15 gM = 1.5 kgL = 1.5 mθ = 40°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
ω = ?L = 0.6 mm = 5 kg

A uniform slender rod of mass 5 kg and length 0.6 m is pinned at one end and released from rest in a horizontal position. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.

m = 5 kgL = 0.6 mg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
θ = 20°a

A solid cylinder rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of its centre.

θ = 20°I = ½·m·r²g = 9.81 m/s²
a = m/s²
15.Gears & gear trainsMedium
N1​N2​ = ?

Two parallel shafts are 150 mm apart. They must be connected by a pair of spur gears with a module of 2.5 mm and a speed reduction of 4 : 1. How many teeth N2 must the gear have?

a = 150 mmm = 2.5 mmi = 4
N2 =
16.Gears & gear trainsHard
A = 20B = 25C = 18D = ?

In a compound gear train, gear A (20 teeth) on the input shaft turns at 1440 rpm and drives gear B (25 teeth). Gear C (18 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 460.8 rpm. How many teeth ND must gear D have?

nin = 1440 rpmA = 20B = 25C = 18nout = 460.8 rpm
ND =
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 2.8 s? Use g = 9.81 m/s². Find L.

T = 2.8 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
2 kgk = 600 N/m200 m/s

A 10 g bullet moving at 200 m/s hits and stays in a 2 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 600 N/m. Find the amplitude A of the resulting oscillation in cm.

m = 10 gv = 200 m/sM = 2 kgk = 600 N/m
A = cm
19.Mechanical vibrationsMedium
k = 40 kN/mc = 570 N·s/mm = 50 kg

A 50 kg mass is supported by a spring with a stiffness of 40 kN/m and a viscous damper with a damping coefficient of 570 N·s/m. Find the damping ratio ζ.

m = 50 kgk = 40 kN/mc = 570 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 40k2​ = 80k3​ = 60m = 10 kg

A 10 kg mass hangs from spring k₃ = 60 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 40 kN/m and k₂ = 80 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 10 kgk1 = 40 kN/mk2 = 80 kN/mk3 = 60 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 70.15 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 100/3.6 = 27.78 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 27.78²/(2·5.5) = 70.15 m

Answer

s = 70.15 m
2.Kinematics

Answer: hmax = 272.8 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 32·2 = 64 m/s
h₁ = ½·32·2² = 64 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 64²/(2·9.81) = 208.8 m
hmax = 64 + 208.8 = 272.8 m

Answer

hmax = 272.8 m
3.Newton’s laws

Answer: a = 1.972 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 20° − 0.15·cos 20°) = 9.81·(0.342 − 0.141) = 1.972 m/s²

Answer

a = 1.972 m/s²
4.Newton’s laws

Answer: d = 2.323 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 15° + 0.3·cos 15°) = 5.382 m/s²

Distance

d = v₀²/(2a) = 5²/(2·5.382) = 2.323 m

Answer

d = 2.323 m
5.Projectile motion

Answer: θ = 30.27 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·60/26² = 0.8707

Angle

2θ = 60.54° → θ = 30.27°

Answer

θ = 30.27°

The other solution is 90° − θ = 59.73°.

6.Projectile motion

Answer: t = 3.087 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 16·cos 40° = 12.26 m/s
vy = v0·sin θ = 16·sin 40° = 10.28 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 15 + 10.28·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (10.28 + √(105.8 + 294.3))/9.81 = 3.087 s

Answer

t = 3.087 s
7.Circular motion

Answer: vmax = 23.23 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·110) = 23.23 m/s

Answer

vmax = 23.23 m/s (83.62 km/h)
8.Circular motion

Answer: T = 40.01 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.9·9.81 + 1.9·3²/0.8 = 18.64 + 21.37 = 40.01 N

Answer

T = 40.01 N
9.Work & energy

Answer: v = 11.52 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·15·(0.5736 − 0.15·0.8192)) = 11.52 m/s

Answer

v = 11.52 m/s
10.Work & energy

Answer: x = 19.18 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 24.53·(1.5 − 0.3·2.5) = 18.39 J

Maximum compression

½kx² = 18.39 → x = √(2·18.39/1000) = 0.1918 m = 19.18 cm

Answer

x = 19.18 cm
11.Momentum & collisions

Answer: ΔK = 13689 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1100·8/1800 = 4.889 m/s

Kinetic energy before and after

Kbefore = ½·1100·8² = 35200 J
Kafter = ½·1800·4.889² = 21511 J

Energy lost

ΔK = 35200 − 21511 = 13689 J

Answer

ΔK = 13689 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: v = 265 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.5·(1 − cos 40°) = 0.3509 m

Speed after impact

V = √(2·9.81·0.3509) = 2.624 m/s

Collision

v = (m + M)·V/m = 1.515·2.624/0.015 = 265 m/s

Answer

v = 265 m/s
13.Rigid-body rotation

Answer: ω = 7.004 rad/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 = 5·9.81·0.3 = 14.71 J

Moment of inertia about the pin

IO = m·L²/3 = 5·0.6²/3 = 0.6 kg·m²

Energy balance

½·IO·ω² = 14.71 → ω = √(2·14.71/0.6) = 7.004 rad/s

Answer

ω = 7.004 rad/s
14.Rigid-body rotation

Answer: a = 2.237 m/s²

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.5·m·r²·(a/r) → f = 0.5·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 20°/1.5 = 2.237 m/s²

Answer

a = 2.237 m/s²
15.Gears & gear trains

Answer: N2 = 96

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·150/2.5 = 120

Split by the ratio

N1 = 120/(1 + 4) = 24
N2 = 4·24 = 96

Answer

N2 = 96
16.Gears & gear trains

Answer: ND = 45

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 1440·20/25 = 1152 rpm

Teeth on gear D

ND = C·nC/nout = 18·1152/460.8 = 45

Answer

ND = 45
17.Springs & pendulums

Answer: L = 1.948 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(2.8/2π)² = 1.948 m

Answer

L = 1.948 m
18.Springs & pendulums

Answer: A = 5.759 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Speed after impact

V = m·v/(m + M) = 0.01·200/2.01 = 0.995 m/s

Angular frequency

ω = √(k/(m + M)) = √(600/2.01) = 17.28 rad/s

Amplitude

A = V/ω = 0.995/17.28 = 0.05759 m = 5.759 cm

Answer

A = 5.759 cm
19.Mechanical vibrations

Answer: ζ = 0.2015

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(40000·50) = 2828 N·s/m

Damping ratio

ζ = c/cc = 570/2828 = 0.2015

Answer

ζ = 0.2015

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 10.07 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 40 + 80 = 120 kN/m
keq = 120·60/(120 + 60) = 40 kN/m

Natural frequency

ωn = √(40000/10) = 63.25 rad/s
fn = 63.25/(2π) = 10.07 Hz

Answer

fn = 10.07 Hz

ExamProblems · examproblems.com/courses/dynamics