Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)6.667 s33.33

A car driving at 120 km/h brakes with a constant deceleration of 5 m/s² until it stops. Find the braking distance s.

v₀ = 120 km/ha = −5 m/s²v = 0
s = m
2.KinematicsHard
a = 34 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 34 m/s² for 2 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 34 m/s²t1 = 2 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 45°a = ?m = 16 kg

A 16 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 16 kgθ = 45°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 2 kg6 kgμ = 0.1

A 2 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 6 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 2 kgm2 = 6 kgμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 32 m/sθ = ?R = 55 m

A ball is launched from level ground at 32 m/s and must land 55 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 32 m/sR = 55 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 60 mv0​ = 32 m/s15°v = ?

A ball is launched at 32 m/s and 15° above the horizontal from the top of a 60 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the speed v with which it hits the ground.

v₀ = 32 m/sθ = 15°h = 60 mg = 9.81 m/s²
v = m/s
7.Circular motionMedium
r = 45 mvmax​ = ?

A car takes a flat curve of radius 45 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 45 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 9.5 mh = ?

A small cart is released from rest on a frictionless track and runs into a vertical loop of radius 9.5 m. From what minimum height hmin above the bottom of the loop must it start to stay on the track at the top of the loop?

R = 9.5 mv₀ = 0
hmin = m
9.Work & energyMedium
15°d = 11 mμ = 0.15

A 4 kg block slides 11 m down a slope at 15° to the horizontal, with a coefficient of kinetic friction of 0.15. Find the work Wf done against friction.

m = 4 kgθ = 15°μ = 0.15d = 11 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 3 mL = 5 mμ = 0.15k = 2500 N/m

A 4 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 5 m long (μ = 0.15) and then runs onto a spring (k = 2500 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 4 kgh = 3 mL = 5 mμ = 0.15k = 2500 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
2 kg10 m/s4.5 kg

A 2 kg glider moving at 10 m/s makes a perfectly elastic head-on collision with a 4.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 2 kgm2 = 4.5 kgv1 = 10 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
22 m/s13 m/s

A 0.25 kg ball hits a wall at 22 m/s and bounces straight back at 13 m/s. The contact lasts 40 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.25 kgvin = 22 m/svout = 13 m/sΔt = 40 ms
J = N·s
13.Rigid-body rotationMedium
L = 2.1 mm = 7.5 kgα

A uniform slender rod of mass 7.5 kg and length 2.1 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 7.5 kgL = 2.1 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
θ = 35°as = 5.5 m

A solid sphere rolls without slipping down a slope inclined at 35° to the horizontal. Use g = 9.81 m/s². It starts from rest. How long t does it take to roll 5.5 m down the slope?

θ = 35°I = (2/5)·m·r²g = 9.81 m/s²s = 5.5 m
t = s
15.Gears & gear trainsMedium
N1​ = 25N2​ = 36

A 15 kW motor running at 2900 rpm drives a pinion with 25 teeth, which meshes with a gear with 36 teeth. The gear pair has an efficiency of 97%. Find the output torque T2 on the gear shaft.

P = 15 kWn1 = 2900 rpmN1 = 25N2 = 36η = 97%
T2 = N·m
16.Gears & gear trainsHard
Ns​ = 24nr​ = ?Np​ = 30carrier fixed

In a planetary gear set the sun gear has 24 teeth and each planet gear has 30 teeth. The planet carrier is held fixed and the sun is driven at 3000 rpm. Find the speed nr of the ring gear (magnitude).

Ns = 24Np = 30ns = 3000 rpm
nr = rpm
17.Springs & pendulumsMedium
L = 1.1 mT = 3.42 s

An astronaut on another planet finds that a simple pendulum 1.1 m long has a period of 3.42 s for small swings. Find the gravitational acceleration g on that planet.

L = 1.1 mT = 3.42 s
g = m/s²
18.Springs & pendulumsHard
2 kgk = 490 N/mA = 3 cm

A 2 kg mass on a spring with k = 490 N/m is pulled 3 cm from equilibrium and released. Find its maximum speed vmax.

m = 2 kgk = 490 N/mA = 3 cm
vmax = m/s
19.Mechanical vibrationsMedium
k = 80 kN/mζ = 0.5m = 40 kg

A 40 kg mass on a spring with a stiffness of 80 kN/m has a viscous damper giving a damping ratio of 0.5. Find the damped natural frequency fd of its free vibration in Hz.

m = 40 kgk = 80 kN/mζ = 0.5
fd = Hz
20.Mechanical vibrationsHard
k1​ = 40k2​ = 40m = 100 kg

A 100 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 40 kN/m and k₂ = 40 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 40 kN/mk2 = 40 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 111.1 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 120/3.6 = 33.33 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 33.33²/(2·5) = 111.1 m

Answer

s = 111.1 m
2.Kinematics

Answer: hmax = 303.7 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 34·2 = 68 m/s
h₁ = ½·34·2² = 68 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 68²/(2·9.81) = 235.7 m
hmax = 68 + 235.7 = 303.7 m

Answer

hmax = 303.7 m
3.Newton’s laws

Answer: a = 6.243 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 45° − 0.1·cos 45°) = 9.81·(0.7071 − 0.07071) = 6.243 m/s²

Answer

a = 6.243 m/s²
4.Newton’s laws

Answer: T = 16.19 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (58.86 − 1.962)/8 = 7.112 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 2·7.112 + 1.962 = 16.19 N

Answer

T = 16.19 N
5.Projectile motion

Answer: θ = 15.9 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·55/32² = 0.5269

Angle

2θ = 31.8° → θ = 15.9°

Answer

θ = 15.9°

The other solution is 90° − θ = 74.1°.

6.Projectile motion

Answer: v = 46.92 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 32·cos 15° = 30.91 m/s
vy0 = 32·sin 15° = 8.282 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(8.282² + 2·9.81·60) = 35.3 m/s

Impact speed

v = √(30.91² + 35.3²) = 46.92 m/s

Answer

v = 46.92 m/s

Check with energy: v² = v₀² + 2gh.

7.Circular motion

Answer: vmax = 16.27 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·45) = 16.27 m/s

Answer

vmax = 16.27 m/s (58.59 km/h)
8.Circular motion

Answer: hmin = 23.75 m

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Condition at the top

m·g = m·v²/R → v² = g·R

Energy conservation

g·h = g·2R + ½·g·R → h = 2.5·R = 2.5·9.5 = 23.75 m

Answer

hmin = 23.75 m
9.Work & energy

Answer: Wf = 62.54 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 39.24·0.9659 = 37.9 N
F = μN = 0.15·37.9 = 5.685 N

Work against friction

Wf = F·d = 5.685·11 = 62.54 J

Answer

Wf = 62.54 J
10.Work & energy

Answer: v = 6.644 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 39.24·(3 − 0.15·5) = 88.29 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·2.25) = 6.644 m/s

Answer

v = 6.644 m/s
11.Momentum & collisions

Answer: v′2 = 6.154 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (2 − 4.5)/(2 + 4.5)·10 = −3.846 m/s
v′2 = 2·2/(2 + 4.5)·10 = 6.154 m/s

Answer

v′2 = 6.154 m/s
12.Momentum & collisions

Answer: J = 8.75 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.25·(13 + 22) = 8.75 N·s

Answer

J = 8.75 N·s
13.Rigid-body rotation

Answer: R = 18.39 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.1) = 7.007 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 7.5·(9.81 − 7.357) = 18.39 N

Answer

R = 18.39 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: t = 1.654 s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.4·m·r²·(a/r) → f = 0.4·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 35°/1.4 = 4.019 m/s²

Time

s = ½·a·t² → t = √(2·5.5/4.019) = 1.654 s

Answer

t = 1.654 s
15.Gears & gear trains

Answer: T2 = 68.99 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·2900/60 = 303.7 rad/s
T1 = P/ω₁ = 15000/303.7 = 49.39 N·m

Output torque

T2 = 49.39·36/25·0.97 = 68.99 N·m

Answer

T2 = 68.99 N·m
16.Gears & gear trains

Answer: nr = 857.1 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 24 + 2·30 = 84

Willis equation with the carrier fixed

With nc = 0 the sun drives the ring through the planets, which act as idlers.

nr = −ns·Ns/Nr = −3000·24/84 = −857.1 rpm
|nr| = 857.1 rpm

Answer

nr = 857.1 rpm

The ring turns opposite to the sun.

17.Springs & pendulums

Answer: g = 3.713 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for g

g = 4π²·L/T² = 4π²·1.1/3.42² = 3.713 m/s²

Answer

g = 3.713 m/s²
18.Springs & pendulums

Answer: vmax = 0.4696 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(490/2) = 15.65 rad/s

Maximum speed

vmax = A·ω = 0.03·15.65 = 0.4696 m/s

Answer

vmax = 0.4696 m/s
19.Mechanical vibrations

Answer: fd = 6.164 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(80000/40) = 44.72 rad/s
fn = 44.72/(2π) = 7.118 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 7.118·√(1 − 0.5²) = 6.164 Hz

Answer

fd = 6.164 Hz
20.Mechanical vibrations

Answer: fn = 4.502 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 40 + 40 = 80 kN/m

Natural frequency

ωn = √(80000/100) = 28.28 rad/s
fn = 28.28/(2π) = 4.502 Hz

Answer

fn = 4.502 Hz

ExamProblems · examproblems.com/courses/dynamics