Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 6 m/s²car21 m/s

A car speeding at a constant 21 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 6 m/s². How long does it take the police car to catch up? Find t.

vcar = 21 m/sapolice = 6 m/s²v0,police = 0
t = s
2.KinematicsHard
t (s)v (m/s)12 s

A tram starts from rest and accelerates at 2 m/s² for 12 s, then runs at constant speed for 6 s, and finally brakes at 2.5 m/s² until it stops. Find the total distance s between the two stops.

a1 = 2 m/s²t1 = 12 st2 = 6 sa3 = −2.5 m/s²
s = m
3.Newton’s lawsMedium
θ = 40°a = ?m = 14 kg

A 14 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 14 kgθ = 40°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 25°blockv₀ = 4.5 m/s

A block is given a push so that it starts sliding up a ramp at 25° with a speed of 4.5 m/s. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 4.5 m/sθ = 25°μ = 0.1g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 10 m/s40°x = ?

A ball is launched at 40° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 10 m/sθ = 40°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 60 mv0​ = 27 m/s15°x = ?

A ball is launched at 15° above horizontal from the top of a 60 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 27 m/sθ = 15°h = 60 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 115 mvmax​ = ?

A car takes a flat curve of radius 115 m. The coefficient of static friction between tyres and road is 0.3. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 115 mμs = 0.3g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.4 mv = 7.5 m/s

A 0.9 kg ball on a string 1.4 m long is swung in a vertical circle. At the lowest point it moves at 7.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 0.9 kgr = 1.4 mv = 7.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
0.1 kgk = 400 N/mh = ?

A toy launcher has a vertical spring of stiffness 400 N/m. A 0.1 kg ball is placed on it and the spring is compressed by 10 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.

m = 0.1 kgk = 400 N/mx = 10 cmg = 9.81 m/s²
h = m
10.Work & energyHard
F = 70 N25°μ = 0.35 kg

A 5 kg block starts from rest at the bottom of a 25° slope and is pulled up the slope by a constant force of 70 N parallel to the slope. The coefficient of kinetic friction is 0.3. Find the speed v of the block after it has moved 9 m up the slope.

m = 5 kgF = 70 Nθ = 25°μ = 0.3d = 9 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
1 kg70 m/s6 kgv′2​ = ?

A 7 kg projectile moving horizontally at 12 m/s explodes into two fragments that move along the same line. The 1 kg fragment continues forwards at 70 m/s. Find the velocity v′2 of the 6 kg fragment (positive in the original direction).

M = 7 kgu = 12 m/sm1 = 1 kgv′1 = 70 m/sm2 = 6 kg
v′2 = m/s
12.Momentum & collisionsHard
4 kgv = ?10 g25°L = 1.1 m

A 10 g bullet is fired horizontally into a 4 kg block hanging from light strings 1.1 m long, and stays in it. The strings swing out to a largest angle of 25° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 10 gM = 4 kgL = 1.1 mθ = 25°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
5.5 kgaαM = 9 kgR = 0.3 m

A 5.5 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 9 kg and radius 0.3 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the angular acceleration α of the pulley.

m = 5.5 kgM = 9 kgR = 0.3 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
5.5 m/sω

A hollow sphere of mass 3.5 kg rolls without slipping at 5.5 m/s. What percentage p of its total kinetic energy is rotational?

m = 3.5 kgv = 5.5 m/sI = (2/3)·m·r²
p = %
15.Gears & gear trainsMedium
d1​ = 200 mmd2​ = 250 mm960 rpmn2​ = ?

A 200 mm pulley at 960 rpm drives a 250 mm pulley by a belt with 1.5 % slip. Find the speed n2 of the driven pulley.

n1 = 960 rpmd1 = 200 mmd2 = 250 mms = 1.5 %
n2 = rpm
16.Gears & gear trainsHard
A = 36B = 60C = 30D = 80

An 11 kW motor at 1450 rpm drives gear A (36 teeth), which meshes with gear B (60 teeth). Gear C (30 teeth) on the same shaft as B drives gear D (80 teeth) on the output shaft. Each gear mesh has an efficiency of 97%. Find the output torque Tout.

P = 11 kWnin = 1450 rpmA = 36B = 60C = 30D = 80ηmesh = 97%
Tout = N·m
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 2 s? Use g = 9.81 m/s². Find L.

T = 2 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
mk = 330 N/mA = 7 cmx = 3 cm

A mass on a spring with k = 330 N/m oscillates on a frictionless surface with an amplitude of 7 cm. Find the energy U stored in the spring when the mass is 3 cm from equilibrium.

k = 330 N/mA = 7 cmx = 3 cm
U = J
19.Mechanical vibrationsMedium
tx50 mm2 cycles18.2 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 50 mm is followed 2 cycles later by a peak of 18.2 mm. Find the damping ratio ζ.

x0 = 50 mmx2 = 18.2 mmn = 2
ζ =
20.Mechanical vibrationsHard
k1​ = 80k2​ = 40m = 5 kg

A 5 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 80 kN/m and k₂ = 40 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 80 kN/mk2 = 40 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 7 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·21/6 = 7 s

Answer

t = 7 s

At that moment the police car moves at 2v = 42 m/s.

2.Kinematics

Answer: s = 403.2 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Top speed

v = a1·t1 = 2·12 = 24 m/s

Distance of each phase

s1 = ½·2·12² = 144 m
s2 = 24·6 = 144 m
s3 = 24²/(2·2.5) = 115.2 m

Total distance

s = 144 + 144 + 115.2 = 403.2 m

Answer

s = 403.2 m
3.Newton’s laws

Answer: a = 5.179 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 40° − 0.15·cos 40°) = 9.81·(0.6428 − 0.1149) = 5.179 m/s²

Answer

a = 5.179 m/s²
4.Newton’s laws

Answer: d = 2.011 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 25° + 0.1·cos 25°) = 5.035 m/s²

Distance

d = v₀²/(2a) = 4.5²/(2·5.035) = 2.011 m

Answer

d = 2.011 m
5.Projectile motion

Answer: x = 10.04 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 10·cos 40° = 7.66 m/s
vy = v0·sin θ = 10·sin 40° = 6.428 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·6.428/9.81 = 1.31 s

Horizontal distance

x = vx·t = 7.66·1.31 = 10.04 m

Answer

x = 10.04 m
6.Projectile motion

Answer: x = 111.7 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 27·cos 15° = 26.08 m/s
vy = v0·sin θ = 27·sin 15° = 6.988 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 60 + 6.988·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (6.988 + √(48.83 + 1177))/9.81 = 4.282 s

Horizontal distance

x = vx·t = 26.08·4.282 = 111.7 m

Answer

x = 111.7 m
7.Circular motion

Answer: vmax = 18.4 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.3·9.81·115) = 18.4 m/s

Answer

vmax = 18.4 m/s (66.23 km/h)
8.Circular motion

Answer: T = 44.99 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 0.9·9.81 + 0.9·7.5²/1.4 = 8.829 + 36.16 = 44.99 N

Answer

T = 44.99 N
9.Work & energy

Answer: h = 2.039 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 10 cm = 0.1 m
½kx² = ½·400·0.1² = 2 J

Height

m·g = 0.1·9.81 = 0.981 N
h = ½kx²/(mg) = 2/0.981 = 2.039 m

Answer

h = 2.039 m
10.Work & energy

Answer: v = 11.37 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 5·9.81 = 49.05 N
mg·sin θ = 20.73 N
μ·mg·cos θ = 13.34 N

Work–energy

½mv² = (70 − 34.07)·9 = 323.4 J
v = √(2·323.4/5) = 11.37 m/s

Answer

v = 11.37 m/s
11.Momentum & collisions

Answer: v′2 = 2.333 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 7·12 = 84 kg·m/s

Momentum after

84 = 1·70 + 6·v′2
v′2 = (84 − 70)/6 = 2.333 m/s

Answer

v′2 = 2.333 m/s
12.Momentum & collisions

Answer: v = 570.2 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.1·(1 − cos 25°) = 0.1031 m

Speed after impact

V = √(2·9.81·0.1031) = 1.422 m/s

Collision

v = (m + M)·V/m = 4.01·1.422/0.01 = 570.2 m/s

Answer

v = 570.2 m/s
13.Rigid-body rotation

Answer: α = 17.99 rad/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Block and pulley

block: m·g − T = m·a
pulley: T·R = I·α = ½·M·R²·(a/R) → T = ½·M·a

Acceleration

a = m·g/(m + M/2) = 5.5·9.81/(5.5 + 4.5) = 5.396 m/s²

Angular acceleration

α = a/R = 5.396/0.3 = 17.99 rad/s²

Answer

α = 17.99 rad/s²
14.Rigid-body rotation

Answer: p = 40 %

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·3.5·5.5² = 52.94 J
Erot = ½·I·ω² = ½·0.6667·m·r²·(v/r)² = 0.6667·52.94 = 35.29 J

Rotational share

p = 35.29/88.23·100% = c/(1 + c)·100% = 40%

Answer

p = 40 %

The share depends only on the shape, not on the mass or the speed.

15.Gears & gear trains

Answer: n2 = 756.5 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

960·200/250 = 768 rpm

With slip

n2 = 768·0.985 = 756.5 rpm

Answer

n2 = 756.5 rpm
16.Gears & gear trains

Answer: Tout = 302.9 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1450·(36/60)·(30/80) = 326.3 rpm
ωout = 2π·326.3/60 = 34.16 rad/s

Output power and torque

Pout = 11000·0.97² = 10350 W
Tout = Pout/ωout = 10350/34.16 = 302.9 N·m

Answer

Tout = 302.9 N·m
17.Springs & pendulums

Answer: L = 0.994 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(2/2π)² = 0.994 m

Answer

L = 0.994 m
18.Springs & pendulums

Answer: U = 0.1485 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Total energy

E = ½·k·A² = ½·330·0.07² = 0.8085 J

Spring energy at x

U = ½·k·x² = ½·330·0.03² = 0.1485 J

Answer

U = 0.1485 J
19.Mechanical vibrations

Answer: ζ = 0.08016

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/2)·ln(50/18.2) = 0.5053

Damping ratio

ζ = δ/√(4π² + δ²) = 0.5053/√(39.48 + 0.2553) = 0.08016

Answer

ζ = 0.08016
20.Mechanical vibrations

Answer: fn = 24.66 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 80 + 40 = 120 kN/m

Natural frequency

ωn = √(120000/5) = 154.9 rad/s
fn = 154.9/(2π) = 24.66 Hz

Answer

fn = 24.66 Hz

ExamProblems · examproblems.com/courses/dynamics