Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = 2 m/s²s = 700 m

A plane starts from rest and accelerates uniformly at 2 m/s² along a runway. Find its speed v after 700 m.

v₀ = 0a = 2 m/s²s = 700 m
v = m/s
2.KinematicsHard
v₀ = 13 m/s40 m

A ball is thrown straight up at 13 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 13 m/sh₀ = 40 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 20°20 kgF = ?

A 20 kg box is pushed up a ramp at 20° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the pushing force F.

m = 20 kgθ = 20°μ = 0.1g = 9.81 m/s²
F = N
4.Newton’s lawsHard
m1​ = 1 kg5.5 kgμ = 0.25

A 1 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5.5 kg mass. The coefficient of kinetic friction between block and table is 0.25. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 1 kgm2 = 5.5 kgμ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
47 my = ?v0​ = 34 m/s45°

A ball is kicked from level ground at 34 m/s and 45° above the horizontal towards a wall 47 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 34 m/sθ = 45°x = 47 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 25 mv0​ = 26 m/s55°range

A ball is launched at 55° above horizontal from the top of a 25 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 26 m/sθ = 55°h = 25 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 45 mvmax​ = ?

A car takes a flat curve of radius 45 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 45 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.9 mv = ?

A ball on a string 0.9 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 0.9 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
35°d = 16 mμ = 0.3

A 10 kg block slides 16 m down a slope at 35° to the horizontal, with a coefficient of kinetic friction of 0.3. Find the work Wf done against friction.

m = 10 kgθ = 35°μ = 0.3d = 16 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 3 mL = 1.5 mμ = 0.2k = 2000 N/m

A 10 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.2) and then runs onto a spring (k = 2000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 10 kgh = 3 mL = 1.5 mμ = 0.2k = 2000 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
2 kg63 m/s17 kgv′2​ = ?

A 19 kg projectile moving horizontally at 19 m/s explodes into two fragments that move along the same line. The 2 kg fragment continues forwards at 63 m/s. Find the velocity v′2 of the 17 kg fragment (positive in the original direction).

M = 19 kgu = 19 m/sm1 = 2 kgv′1 = 63 m/sm2 = 17 kg
v′2 = m/s
12.Momentum & collisionsHard
2 kgv = ?5 g20°L = 2 m

A 5 g bullet is fired horizontally into a 2 kg block hanging from light strings 2 m long, and stays in it. The strings swing out to a largest angle of 20° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 5 gM = 2 kgL = 2 mθ = 20°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
n = 1000 rpmTb​ = 95 N·mI = 35.5 kg·m²

A flywheel with a moment of inertia of 35.5 kg·m² spins at 1000 rpm. A brake applies a constant friction torque of 95 N·m. How many revolutions N does the flywheel make before it stops?

I = 35.5 kg·m²n = 1000 rpmTb = 95 N·m
N = rev
14.Rigid-body rotationHard
disc: 12 kgring: 6 kgn1​ = 700 rpm

A uniform solid disc (mass 12 kg, radius 0.1 m) spins freely at 700 rpm about a vertical frictionless shaft. A thin ring of mass 6 kg and the same radius is dropped onto it from rest, centred on the shaft, and the two quickly spin together. Find their common speed n2 in rpm.

Mdisc = 12 kgMring = 6 kgR = 0.1 mn1 = 700 rpm
n2 = rpm
15.Gears & gear trainsMedium
d1​ = 80 mmd2​ = 500 mm960 rpmn2​ = ?

An 80 mm pulley at 960 rpm drives a 500 mm pulley by a belt with 1.5 % slip. Find the speed n2 of the driven pulley.

n1 = 960 rpmd1 = 80 mmd2 = 500 mms = 1.5 %
n2 = rpm
16.Gears & gear trainsHard
d1​ = 160 mmd2​ = 400 mm1450 rpmC = 500 mmT1​ = 800 NT2​P = ?

An open belt connects a 160 mm driving pulley at 1450 rpm to a 400 mm pulley; the centres are 500 mm apart. The coefficient of friction is 0.35 and the tight-side tension may not exceed 800 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 160 mmn1 = 1450 rpmd2 = 400 mmC = 500 mmμ = 0.35T1 = 800 N
P = kW
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 1 s? Use g = 9.81 m/s². Find L.

T = 1 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
3.3 kgk = 150 N/mA = 5 cm

A 3.3 kg mass on a spring with k = 150 N/m is pulled 5 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 3.3 kgk = 150 N/mA = 5 cm
E = J
19.Mechanical vibrationsMedium
k = 5 kN/mc = 110 N·s/mm = 25 kg

A 25 kg mass is supported by a spring with a stiffness of 5 kN/m and a viscous damper with a damping coefficient of 110 N·s/m. Find the damping ratio ζ.

m = 25 kgk = 5 kN/mc = 110 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 30k2​ = 5m = 20 kg

A 20 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 30 kN/m and the lower one k₂ = 5 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 20 kgk1 = 30 kN/mk2 = 5 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: v = 52.92 m/s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Speed after the distance

v = √(2·a·s) = √(2·2·700) = 52.92 m/s

Answer

v = 52.92 m/s
(190.5 km/h)
2.Kinematics

Answer: t = 4.473 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−40 = 13·t − ½·9.81·t²
4.905·t² − 13·t − 40 = 0

Solve the quadratic

Only the positive root is physical.

t = (13 + √(13² + 2·9.81·40))/9.81 = 4.473 s

Answer

t = 4.473 s
3.Newton’s laws

Answer: F = 85.54 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Constant speed: the forces balance.

F = m·g·sin θ + μ·m·g·cos θ

Pushing force

F = 67.1 + 18.44 = 85.54 N

Answer

F = 85.54 N
4.Newton’s laws

Answer: T = 10.38 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (53.96 − 2.453)/6.5 = 7.923 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 1·7.923 + 2.453 = 10.38 N

Answer

T = 10.38 N
5.Projectile motion

Answer: y = 28.25 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 34·cos 45° = 24.04 m/s
t = x/vx = 47/24.04 = 1.955 s

Height at that time

y = 24.04·1.955 − ½·9.81·1.955² = 28.25 m

Answer

y = 28.25 m

The ball is still rising at the wall.

6.Projectile motion

Answer: t = 5.303 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 26·cos 55° = 14.91 m/s
vy = v0·sin θ = 26·sin 55° = 21.3 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 25 + 21.3·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (21.3 + √(453.6 + 490.5))/9.81 = 5.303 s

Answer

t = 5.303 s
7.Circular motion

Answer: vmax = 14.86 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·45) = 14.86 m/s

Answer

vmax = 14.86 m/s (53.48 km/h)
8.Circular motion

Answer: vmin = 2.971 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·0.9) = 2.971 m/s

Answer

vmin = 2.971 m/s
9.Work & energy

Answer: Wf = 385.7 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 98.1·0.8192 = 80.36 N
F = μN = 0.3·80.36 = 24.11 N

Work against friction

Wf = F·d = 24.11·16 = 385.7 J

Answer

Wf = 385.7 J
10.Work & energy

Answer: v = 7.278 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 98.1·(3 − 0.2·1.5) = 264.9 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·2.7) = 7.278 m/s

Answer

v = 7.278 m/s
11.Momentum & collisions

Answer: v′2 = 13.82 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 19·19 = 361 kg·m/s

Momentum after

361 = 2·63 + 17·v′2
v′2 = (361 − 126)/17 = 13.82 m/s

Answer

v′2 = 13.82 m/s
12.Momentum & collisions

Answer: v = 616.9 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 2·(1 − cos 20°) = 0.1206 m

Speed after impact

V = √(2·9.81·0.1206) = 1.538 m/s

Collision

v = (m + M)·V/m = 2.005·1.538/0.005 = 616.9 m/s

Answer

v = 616.9 m/s
13.Rigid-body rotation

Answer: N = 326.1 rev

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1000/60 = 104.7 rad/s

Work of the brake equals the kinetic energy

½·I·ω² = ½·35.5·104.7² = 194651 J
θ = 194651/95 = 2049 rad

Revolutions

N = θ/2π = 326.1 rev

Answer

N = 326.1 rev
14.Rigid-body rotation

Answer: n2 = 350 rpm

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = ½·12·0.1² = 0.06 kg·m²
I2 = 6·0.1² = 0.06 kg·m²

Conservation of angular momentum

n2 = n1·I1/(I1 + I2) = 700·0.06/0.12 = 350 rpm

Answer

n2 = 350 rpm
15.Gears & gear trains

Answer: n2 = 151.3 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

960·80/500 = 153.6 rpm

With slip

n2 = 153.6·0.985 = 151.3 rpm

Answer

n2 = 151.3 rpm
16.Gears & gear trains

Answer: P = 5.883 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.657 rad

Slack-side tension

eμθ = e0.9299 = 2.534, T₂ = 800/2.534 = 315.7 N

Power

P = (800 − 315.7)·12.15 = 5.883 kW

Answer

P = 5.883 kW
17.Springs & pendulums

Answer: L = 0.2485 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(1/2π)² = 0.2485 m

Answer

L = 0.2485 m
18.Springs & pendulums

Answer: E = 0.1875 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(150/3.3) = 6.742 rad/s

Energy

E = ½·k·A² = ½·150·0.05² = 0.1875 J

Answer

E = 0.1875 J
19.Mechanical vibrations

Answer: ζ = 0.1556

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(5000·25) = 707.1 N·s/m

Damping ratio

ζ = c/cc = 110/707.1 = 0.1556

Answer

ζ = 0.1556

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: keq = 4.286 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/30 + 1/5 → keq = 30·5/(30 + 5) = 4.286 kN/m

Answer

keq = 4.286 kN/m

ExamProblems · examproblems.com/courses/dynamics