Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?12.5

A car driving at 45 km/h brakes with a constant deceleration of 8 m/s² until it stops. How long does braking take? Find t.

v₀ = 45 km/ha = −8 m/s²v = 0
t = s
2.KinematicsHard
v₀ = 15 m/s40 m

A ball is thrown straight up at 15 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 15 m/sh₀ = 40 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 35°a = ?m = 17 kg

A 17 kg block slides down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 17 kgθ = 35°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
9 kg1 kgTF = 100 Nμ = 0.15

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 100 N pulls the front 1 kg block; the 9 kg block is towed behind. The coefficient of kinetic friction is 0.15 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.

m1 = 9 kgm2 = 1 kgF = 100 Nμ = 0.15g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = ?70°R = 85 m

A ball is launched from level ground at 70° above the horizontal and lands 85 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 70°R = 85 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 45 mv0​ = 18 m/s60°range

A ball is launched at 60° above horizontal from the top of a 45 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 18 m/sθ = 60°h = 45 mg = 9.81 m/s²
t = s
7.Circular motionMedium
L = 1.2 m60°

A small ball on a string of length 1.2 m moves in a horizontal circle so that the string makes a constant angle of 60° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the time T for one revolution.

L = 1.2 mθ = 60°g = 9.81 m/s²
T = s
8.Circular motionHard
r = 0.7 mv = ?

A ball on a string 0.7 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 0.7 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
45°d = 11 mμ = 0.3

A block slides from rest down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.3. Find its speed v after it has slid 11 m along the slope.

θ = 45°μ = 0.3d = 11 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
F = 65 N15°μ = 0.310 kg

A 10 kg block starts from rest at the bottom of a 15° slope and is pulled up the slope by a constant force of 65 N parallel to the slope. The coefficient of kinetic friction is 0.3. Find the speed v of the block after it has moved 5 m up the slope.

m = 10 kgF = 65 Nθ = 15°μ = 0.3d = 5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
5 kg4 m/s2.5 kg

A 5 kg glider moving at 4 m/s makes a perfectly elastic head-on collision with a 2.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 5 kgm2 = 2.5 kgv1 = 4 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
4.5 kgv = ?12 g40°L = 1.4 m

A 12 g bullet is fired horizontally into a 4.5 kg block hanging from light strings 1.4 m long, and stays in it. The strings swing out to a largest angle of 40° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 12 gM = 4.5 kgL = 1.4 mθ = 40°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
ω = ?5 kgL = 0.8 mm = 1 kg

A uniform slender rod of mass 1 kg and length 0.8 m is pinned at one end and released from rest in a horizontal position. A small ball of mass 5 kg is fixed to its free end. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.

m = 1 kgL = 0.8 mmball = 5 kgg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
0.6 m0.35 mn1​ = 45 rpm

A person stands on a frictionless turntable and holds a 1.5 kg dumbbell in each hand, 0.6 m from the axis. The person and turntable alone have a moment of inertia of 2.5 kg·m² about the axis. They turn at 45 rpm, then pull the dumbbells in to 0.35 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.

I0 = 2.5 kg·m²m = 2 × 1.5 kgr1 = 0.6 mr2 = 0.35 mn1 = 45 rpm
n2 = rpm
15.Gears & gear trainsMedium
d1​ = 200 mmd2​ = 315 mm2880 rpmn2​ = ?

A 200 mm pulley at 2880 rpm drives a 315 mm pulley by a belt with 2.5 % slip. Find the speed n2 of the driven pulley.

n1 = 2880 rpmd1 = 200 mmd2 = 315 mms = 2.5 %
n2 = rpm
16.Gears & gear trainsHard
A = 24B = 60C = 20D = 32

In a compound gear train, gear A (24 teeth) on the input shaft turning at 1440 rpm drives gear B (60 teeth). Gear C (20 teeth) is fixed to the same shaft as B and drives gear D (32 teeth) on the output shaft. Find the output speed nout.

nin = 1440 rpmA = 24B = 60C = 20D = 32
nout = rpm
17.Springs & pendulumsMedium
t (s)x (cm)1.1 s

A 3.3 kg mass on a spring with k = 160 N/m is pulled 4 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 1.1 s (with sign).

m = 3.3 kgk = 160 N/mA = 4 cmt = 1.1 s
x = cm
18.Springs & pendulumsHard
1 kgk = 600 N/m150 m/s

A 10 g bullet moving at 150 m/s hits and stays in a 1 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 600 N/m. Find the amplitude A of the resulting oscillation in cm.

m = 10 gv = 150 m/sM = 1 kgk = 600 N/m
A = cm
19.Mechanical vibrationsMedium
k = 50 kN/mζ = 0.7m = 50 kg

A 50 kg mass on a spring with a stiffness of 50 kN/m has a viscous damper giving a damping ratio of 0.7. Find the damped natural frequency fd of its free vibration in Hz.

m = 50 kgk = 50 kN/mζ = 0.7
fd = Hz
20.Mechanical vibrationsHard
k1​ = 100k2​ = 60m = 20 kg

A 20 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 100 kN/m and k₂ = 60 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 20 kgk1 = 100 kN/mk2 = 60 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 1.563 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 45/3.6 = 12.5 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 12.5/8 = 1.563 s

Answer

t = 1.563 s
2.Kinematics

Answer: t = 4.768 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−40 = 15·t − ½·9.81·t²
4.905·t² − 15·t − 40 = 0

Solve the quadratic

Only the positive root is physical.

t = (15 + √(15² + 2·9.81·40))/9.81 = 4.768 s

Answer

t = 4.768 s
3.Newton’s laws

Answer: a = 4.823 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 35° − 0.1·cos 35°) = 9.81·(0.5736 − 0.08192) = 4.823 m/s²

Answer

a = 4.823 m/s²
4.Newton’s laws

Answer: a = 8.528 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (100 − 14.71)/10 = 8.528 m/s²

Answer

a = 8.528 m/s²
5.Projectile motion

Answer: v0 = 36.02 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·85/sin 140°) = 36.02 m/s

Answer

v0 = 36.02 m/s
6.Projectile motion

Answer: t = 5.009 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 18·cos 60° = 9 m/s
vy = v0·sin θ = 18·sin 60° = 15.59 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 45 + 15.59·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (15.59 + √(243 + 882.9))/9.81 = 5.009 s

Answer

t = 5.009 s
7.Circular motion

Answer: T = 1.554 s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 1.2·sin 60° = 1.039 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(1.039·9.81·tan 60°) = 4.202 m/s

Period

T = 2π·r/v = 2π·1.039/4.202 = 1.554 s

Answer

T = 1.554 s
8.Circular motion

Answer: vmin = 2.62 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·0.7) = 2.62 m/s

Answer

vmin = 2.62 m/s
9.Work & energy

Answer: v = 10.34 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·11·(0.7071 − 0.3·0.7071)) = 10.34 m/s

Answer

v = 10.34 m/s
10.Work & energy

Answer: v = 3.344 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 10·9.81 = 98.1 N
mg·sin θ = 25.39 N
μ·mg·cos θ = 28.43 N

Work–energy

½mv² = (65 − 53.82)·5 = 55.91 J
v = √(2·55.91/10) = 3.344 m/s

Answer

v = 3.344 m/s
11.Momentum & collisions

Answer: v′1 = 1.333 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (5 − 2.5)/(5 + 2.5)·4 = 1.333 m/s
v′2 = 2·5/(5 + 2.5)·4 = 5.333 m/s

Answer

v′1 = 1.333 m/s
12.Momentum & collisions

Answer: v = 953.2 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.4·(1 − cos 40°) = 0.3275 m

Speed after impact

V = √(2·9.81·0.3275) = 2.535 m/s

Collision

v = (m + M)·V/m = 4.512·2.535/0.012 = 953.2 m/s

Answer

v = 953.2 m/s
13.Rigid-body rotation

Answer: ω = 5.029 rad/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 + mball·g·L = 1·9.81·0.4 + 5·9.81·0.8 = 43.16 J

Moment of inertia about the pin

IO = m·L²/3 + mball·L² = 0.2133 + 3.2 = 3.413 kg·m²

Energy balance

½·IO·ω² = 43.16 → ω = √(2·43.16/3.413) = 5.029 rad/s

Answer

ω = 5.029 rad/s
14.Rigid-body rotation

Answer: n2 = 56.18 rpm

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = 2.5 + 2·1.5·0.6² = 3.58 kg·m²
I2 = 2.5 + 2·1.5·0.35² = 2.867 kg·m²

Conservation of angular momentum

n2 = n1·I1/I2 = 45·3.58/2.867 = 56.18 rpm

Answer

n2 = 56.18 rpm

The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.

15.Gears & gear trains

Answer: n2 = 1783 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

2880·200/315 = 1829 rpm

With slip

n2 = 1829·0.975 = 1783 rpm

Answer

n2 = 1783 rpm
16.Gears & gear trains

Answer: nout = 360 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1440·24/60 = 576 rpm = nC

Second stage

nout = 576·20/32 = 360 rpm

Answer

nout = 360 rpm

total ratio = 4 : 1

17.Springs & pendulums

Answer: x = 0.7734 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(160/3.3) = 6.963 rad/s
ω·t = 6.963·1.1 = 7.659 rad

Displacement

x = A·cos(ω·t) = 4·cos(7.659) = 0.7734 cm

Answer

x = 0.7734 cm
18.Springs & pendulums

Answer: A = 6.093 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Speed after impact

V = m·v/(m + M) = 0.01·150/1.01 = 1.485 m/s

Angular frequency

ω = √(k/(m + M)) = √(600/1.01) = 24.37 rad/s

Amplitude

A = V/ω = 1.485/24.37 = 0.06093 m = 6.093 cm

Answer

A = 6.093 cm
19.Mechanical vibrations

Answer: fd = 3.594 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(50000/50) = 31.62 rad/s
fn = 31.62/(2π) = 5.033 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 5.033·√(1 − 0.7²) = 3.594 Hz

Answer

fd = 3.594 Hz
20.Mechanical vibrations

Answer: fn = 14.24 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 100 + 60 = 160 kN/m

Natural frequency

ωn = √(160000/20) = 89.44 rad/s
fn = 89.44/(2π) = 14.24 Hz

Answer

fn = 14.24 Hz

ExamProblems · examproblems.com/courses/dynamics