In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car speeding at a constant 24 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 2 m/s². How far from its starting point does the police car catch up? Find d.
vcar = 24 m/sapolice = 2 m/s²v0,police = 0
d = m
2.KinematicsHard
A ball is thrown straight up at 6 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.
v₀ = 6 m/sh₀ = 5 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 3 kg block slides down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 3 kgθ = 35°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 3 kg block on a ramp at 25° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 1.5 kg mass. The hanging mass moves down. The ramp is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 3 kgm2 = 1.5 kgθ = 25°μ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is kicked from level ground at 30 m/s and 55° above the horizontal towards a wall 26 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 30 m/sθ = 55°x = 26 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is launched at 55° above horizontal from the top of a 40 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 18 m/sθ = 55°h = 40 mg = 9.81 m/s²
t = s
7.Circular motionMedium
In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 1.5 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.6. Use g = 9.81 m/s². Find the smallest angular speed ω in rad/s.
r = 1.5 mμs = 0.6g = 9.81 m/s²
ω = rad/s
8.Circular motionHard
A ball on a string 0.8 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?
r = 0.8 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
A 1000 kg car drives up a 4° slope at a constant 54 km/h. Air resistance and rolling resistance together amount to 350 N. Find the power P the wheels must deliver, in kW.
A 5 kg block rests on a rough horizontal table (μ = 0.25). A light string runs from it over a smooth pulley at the edge of the table to a hanging 5 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 1.5 m.
m1 = 5 kgm2 = 5 kgμ = 0.25d = 1.5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
A 2 kg glider moving at 6 m/s makes a perfectly elastic head-on collision with a 0.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 2 kgm2 = 0.5 kgv1 = 6 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
A 10 g bullet is fired horizontally into a 2.5 kg block hanging from light strings 0.9 m long, and stays in it. The strings swing out to a largest angle of 30° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 10 gM = 2.5 kgL = 0.9 mθ = 30°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
A motor brings a flywheel with a moment of inertia of 12 kg·m² from rest up to 1400 rpm in 26 s. Ignoring losses, find the average power Pavg it delivers, in kW.
I = 12 kg·m²n = 1400 rpmt = 26 s
Pavg = kW
14.Rigid-body rotationHard
A thin hoop starts from rest and rolls without slipping down a slope inclined at 25° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 4 m along the slope.
θ = 25°s = 4 mI = m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
An 80 mm pulley at 960 rpm drives a 450 mm pulley by a belt with 2.5 % slip. Find the speed n2 of the driven pulley.
n1 = 960 rpmd1 = 80 mmd2 = 450 mms = 2.5 %
n2 = rpm
16.Gears & gear trainsHard
In a compound gear train, gear A (25 teeth) on the input shaft turning at 3000 rpm drives gear B (50 teeth). Gear C (20 teeth) is fixed to the same shaft as B and drives gear D (60 teeth) on the output shaft. Find the output speed nout.
nin = 3000 rpmA = 25B = 50C = 20D = 60
nout = rpm
17.Springs & pendulumsMedium
A simple pendulum has a length of 0.3 m. Use g = 9.81 m/s². Find its period T for small swings.
L = 0.3 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
A mass on a spring with k = 380 N/m oscillates on a frictionless surface with an amplitude of 11 cm. Find its kinetic energy K when it is 10 cm from equilibrium.
k = 380 N/mA = 11 cmx = 10 cm
K = J
19.Mechanical vibrationsMedium
A 40 kg mass on a spring with a stiffness of 25 kN/m has a viscous damper giving a damping ratio of 0.7. Find the damped natural frequency fd of its free vibration in Hz.
m = 40 kgk = 25 kN/mζ = 0.7
fd = Hz
20.Mechanical vibrationsHard
A 50 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 20 kN/m and the lower one k₂ = 10 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 50 kgk1 = 20 kN/mk2 = 10 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: d = 576 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·24/2 = 24 s
Distance
d = v·t = 24·24 = 576 m
Answer
d = 576 m
At that moment the police car moves at 2v = 48 m/s.
2.Kinematics
Answer: hmax = 6.835 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Rise above the roof
0 = v₀² − 2·g·Δh → Δh = 6²/(2·9.81) = 1.835 m
Height above the ground
hmax = 5 + 1.835 = 6.835 m
Answer
hmax = 6.835 m
3.Newton’s laws
Answer: a = 3.216 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 14.71 N
m₁·g·sin θ = 12.44 N
μ·m₁·g·cos θ = 0 N
Acceleration of the system
a = (14.71 − 12.44 − 0)/4.5 = 0.5061 m/s²
Answer
a = 0.5061 m/s²
5.Projectile motion
Answer: y = 25.93 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 30·cos 55° = 17.21 m/s
t = x/vx = 26/17.21 = 1.511 s
Height at that time
y = 24.57·1.511 − ½·9.81·1.511² = 25.93 m
Answer
y = 25.93 m
The ball is still rising at the wall.
6.Projectile motion
Answer: t = 4.73 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 18·cos 55° = 10.32 m/s
vy = v0·sin θ = 18·sin 55° = 14.74 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 40 + 14.74·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (14.74 + √(217.4 + 784.8))/9.81 = 4.73 s
Answer
t = 4.73 s
7.Circular motion
Answer: ω = 3.302 rad/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces on a rider
N = m·ω²·r
μ·N = m·g → μ·ω²·r = g
Angular speed
ω = √(g/(μ·r)) = √(9.81/(0.6·1.5)) = 3.302 rad/s
Answer
ω = 3.302 rad/s
8.Circular motion
Answer: vmin = 2.801 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Tension zero at the top
m·g = m·v²/r → v = √(g·r) = √(9.81·0.8) = 2.801 m/s
Answer
vmin = 2.801 m/s
9.Work & energy
Answer: P = 15.51 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 1000·9.81 = 9810 N
mg·sin θ = 9810·sin 4° = 684.3 N
F = 684.3 + 350 = 1034 N
Power
v = 54/3.6 = 15 m/s
P = F·v = 1034·15 = 15515 W = 15.51 kW
Answer
P = 15.51 kW
10.Work & energy
Answer: v = 3.322 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy released and lost
m₂g·d = 49.05·1.5 = 73.58 J
μ·m₁g·d = 0.25·49.05·1.5 = 18.39 J
Kinetic energy of both blocks
½(m₁ + m₂)v² = 55.18 → v = √(2·55.18/10) = 3.322 m/s
Answer
v = 3.322 m/s
11.Momentum & collisions
Answer: v′1 = 3.6 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (2 − 0.5)/(2 + 0.5)·6 = 3.6 m/s
v′2 = 2·2/(2 + 0.5)·6 = 9.6 m/s
Answer
v′1 = 3.6 m/s
12.Momentum & collisions
Answer: v = 386.1 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 0.9·(1 − cos 30°) = 0.1206 m
Speed after impact
V = √(2·9.81·0.1206) = 1.538 m/s
Collision
v = (m + M)·V/m = 2.51·1.538/0.01 = 386.1 m/s
Answer
v = 386.1 m/s
13.Rigid-body rotation
Answer: Pavg = 4.96 kW
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·1400/60 = 146.6 rad/s
Energy
E = ½·I·ω² = ½·12·146.6² = 128963 J
Average power
Pavg = E/t = 128963/26 = 4960 W = 4.96 kW
Answer
Pavg = 4.96 kW
14.Rigid-body rotation
Answer: v = 4.072 m/s
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Height dropped
h = s·sin θ = 4·sin 25° = 1.69 m
Energy balance with rolling
Rolling without slipping: ω = v/r, and friction does no work at the contact point.
m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·1.69/2) = 4.072 m/s
Answer
v = 4.072 m/s
15.Gears & gear trains
Answer: n2 = 166.4 rpm
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Speed without slip
960·80/450 = 170.7 rpm
With slip
n2 = 170.7·0.975 = 166.4 rpm
Answer
n2 = 166.4 rpm
16.Gears & gear trains
Answer: nout = 500 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
First stage
nB = 3000·25/50 = 1500 rpm = nC
Second stage
nout = 1500·20/60 = 500 rpm
Answer
nout = 500 rpm
total ratio = 6 : 1
17.Springs & pendulums
Answer: T = 1.099 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Pendulum period
T = 2π·√(0.3/9.81) = 1.099 s
Answer
T = 1.099 s
18.Springs & pendulums
Answer: K = 0.399 J
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Total energy
E = ½·k·A² = ½·380·0.11² = 2.299 J
Spring energy at x
U = ½·k·x² = ½·380·0.1² = 1.9 J
Kinetic energy
K = 2.299 − 1.9 = 0.399 J
Answer
K = 0.399 J
19.Mechanical vibrations
Answer: fd = 2.841 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(25000/40) = 25 rad/s
fn = 25/(2π) = 3.979 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 3.979·√(1 − 0.7²) = 2.841 Hz
Answer
fd = 2.841 Hz
20.Mechanical vibrations
Answer: fn = 1.838 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.