Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 3.5 m/s²car21 m/s

A car speeding at a constant 21 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3.5 m/s². How long does it take the police car to catch up? Find t.

vcar = 21 m/sapolice = 3.5 m/s²v0,police = 0
t = s
2.KinematicsHard
d = ?

A stone is dropped from rest into a well. The splash is heard 4.9 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.

ttotal = 4.9 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
θ = 35°a = ?m = 17 kg

A 17 kg block slides down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 17 kgθ = 35°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 8 kg3 kgμ = 0.3

An 8 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 8 kgm2 = 3 kgμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 38 m/s50°x = ?

A ball is launched at 50° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 38 m/sθ = 50°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 20 mv0​ = 14 m/s25°range

A ball is launched at 25° above horizontal from the top of a 20 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 14 m/sθ = 25°h = 20 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 35 mvmax​ = ?

A car takes a flat curve of radius 35 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 35 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 10 mh = 28 m

A 4.5 kg cart is released from rest at a height of 28 m on a frictionless track and runs through a vertical loop of radius 10 m. Use g = 9.81 m/s². Find the normal force Ntop of the track on the cart at the top of the loop.

m = 4.5 kgh = 28 mR = 10 mg = 9.81 m/s²
Ntop = N
9.Work & energyMedium
25°d = 2 mμ = 0.35

A 0.5 kg block slides 2 m down a slope at 25° to the horizontal, with a coefficient of kinetic friction of 0.35. Find the work Wf done against friction.

m = 0.5 kgθ = 25°μ = 0.35d = 2 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
F = 75 N15°μ = 0.28 kg

An 8 kg block starts from rest at the bottom of a 15° slope and is pulled up the slope by a constant force of 75 N parallel to the slope. The coefficient of kinetic friction is 0.2. Find the speed v of the block after it has moved 3 m up the slope.

m = 8 kgF = 75 Nθ = 15°μ = 0.2d = 3 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
5 kg66 m/s15 kgv′2​ = ?

A 20 kg projectile moving horizontally at 35 m/s explodes into two fragments that move along the same line. The 5 kg fragment continues forwards at 66 m/s. Find the velocity v′2 of the 15 kg fragment (positive in the original direction).

M = 20 kgu = 35 m/sm1 = 5 kgv′1 = 66 m/sm2 = 15 kg
v′2 = m/s
12.Momentum & collisionsHard
1900 kg22 m/s1300 kg10 m/sv′ = ?

At a crossing a 1900 kg car travelling east at 22 m/s collides with a 1300 kg car travelling north at 10 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.

m1 = 1900 kgv1 = 22 m/s (E)m2 = 1300 kgv2 = 10 m/s (N)
v′ = m/s
13.Rigid-body rotationMedium
n = 2000 rpmT = 1620 N·m

A motor delivers a torque of 1620 N·m at 2000 rpm. Find its power output P in kW.

T = 1620 N·mn = 2000 rpm
P = kW
14.Rigid-body rotationHard
2 m/sω

A hollow sphere of mass 9 kg rolls without slipping at 2 m/s. What percentage p of its total kinetic energy is rotational?

m = 9 kgv = 2 m/sI = (2/3)·m·r²
p = %
15.Gears & gear trainsMedium
N1​ = 12N2​ = 50

A 4 kW motor running at 1440 rpm drives a pinion with 12 teeth, which meshes with a gear with 50 teeth. The gear pair has an efficiency of 98%. Find the output torque T2 on the gear shaft.

P = 4 kWn1 = 1440 rpmN1 = 12N2 = 50η = 98%
T2 = N·m
16.Gears & gear trainsHard
A = 40B = 72C = 25D = 40

In a compound gear train, gear A (40 teeth) on the input shaft turning at 2900 rpm drives gear B (72 teeth). Gear C (25 teeth) is fixed to the same shaft as B and drives gear D (40 teeth) on the output shaft. Find the output speed nout.

nin = 2900 rpmA = 40B = 72C = 25D = 40
nout = rpm
17.Springs & pendulumsMedium
L = 2.7 m

A simple pendulum has a length of 2.7 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.7 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
2 kgk = 700 N/m350 m/s

An 8 g bullet moving at 350 m/s hits and stays in a 2 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 700 N/m. Find the amplitude A of the resulting oscillation in cm.

m = 8 gv = 350 m/sM = 2 kgk = 700 N/m
A = cm
19.Mechanical vibrationsMedium
k = 200 kN/mζ = 0.4m = 10 kg

A 10 kg mass on a spring with a stiffness of 200 kN/m has a viscous damper giving a damping ratio of 0.4. Find the damped natural frequency fd of its free vibration in Hz.

m = 10 kgk = 200 kN/mζ = 0.4
fd = Hz
20.Mechanical vibrationsHard
k1​ = 60k2​ = 30k3​ = 15m = 100 kg

A 100 kg mass hangs from spring k₃ = 15 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 60 kN/m and k₂ = 30 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 60 kN/mk2 = 30 kN/mk3 = 15 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 12 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·21/3.5 = 12 s

Answer

t = 12 s

At that moment the police car moves at 2v = 42 m/s.

2.Kinematics

Answer: d = 103.7 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Two parts of the time

½·9.81·t₁² = 343·(4.9 − t₁)
4.905·t₁² + 343·t₁ − 1681 = 0

Fall time

Only the positive root is physical.

t₁ = (−343 + √(343² + 4·4.905·1681))/(2·4.905) = 4.598 s

Depth

d = ½·9.81·4.598² = 103.7 m

Answer

d = 103.7 m
3.Newton’s laws

Answer: a = 3.216 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 35° − 0.3·cos 35°) = 9.81·(0.5736 − 0.2457) = 3.216 m/s²

Answer

a = 3.216 m/s²
4.Newton’s laws

Answer: T = 27.82 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (29.43 − 23.54)/11 = 0.5351 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 8·0.5351 + 23.54 = 27.82 N

Answer

T = 27.82 N
5.Projectile motion

Answer: x = 145 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 38·cos 50° = 24.43 m/s
vy = v0·sin θ = 38·sin 50° = 29.11 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·29.11/9.81 = 5.935 s

Horizontal distance

x = vx·t = 24.43·5.935 = 145 m

Answer

x = 145 m
6.Projectile motion

Answer: t = 2.711 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 14·cos 25° = 12.69 m/s
vy = v0·sin θ = 14·sin 25° = 5.917 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 20 + 5.917·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (5.917 + √(35.01 + 392.4))/9.81 = 2.711 s

Answer

t = 2.711 s
7.Circular motion

Answer: vmax = 14.35 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·35) = 14.35 m/s

Answer

vmax = 14.35 m/s (51.67 km/h)
8.Circular motion

Answer: Ntop = 26.49 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·(28 − 2·10) = 157 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R − m·g = 4.5·157/10 − 44.15 = 26.49 N

Answer

Ntop = 26.49 N
9.Work & energy

Answer: Wf = 3.112 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 4.905·0.9063 = 4.445 N
F = μN = 0.35·4.445 = 1.556 N

Work against friction

Wf = F·d = 1.556·2 = 3.112 J

Answer

Wf = 3.112 J
10.Work & energy

Answer: v = 5.445 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 8·9.81 = 78.48 N
mg·sin θ = 20.31 N
μ·mg·cos θ = 15.16 N

Work–energy

½mv² = (75 − 35.47)·3 = 118.6 J
v = √(2·118.6/8) = 5.445 m/s

Answer

v = 5.445 m/s
11.Momentum & collisions

Answer: v′2 = 24.67 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 20·35 = 700 kg·m/s

Momentum after

700 = 5·66 + 15·v′2
v′2 = (700 − 330)/15 = 24.67 m/s

Answer

v′2 = 24.67 m/s
12.Momentum & collisions

Answer: v′ = 13.68 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1900·22 = 41800 kg·m/s
py = 1300·10 = 13000 kg·m/s

Speed of the wreck

v′ = √(px² + py²)/(m1 + m2) = 43775/3200 = 13.68 m/s

Answer

v′ = 13.68 m/s
13.Rigid-body rotation

Answer: P = 339.3 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·2000/60 = 209.4 rad/s

Power

P = T·ω = 1620·209.4 = 339292 W = 339.3 kW

Answer

P = 339.3 kW
14.Rigid-body rotation

Answer: p = 40 %

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·9·2² = 18 J
Erot = ½·I·ω² = ½·0.6667·m·r²·(v/r)² = 0.6667·18 = 12 J

Rotational share

p = 12/30·100% = c/(1 + c)·100% = 40%

Answer

p = 40 %

The share depends only on the shape, not on the mass or the speed.

15.Gears & gear trains

Answer: T2 = 108.3 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 4000/150.8 = 26.53 N·m

Output torque

T2 = 26.53·50/12·0.98 = 108.3 N·m

Answer

T2 = 108.3 N·m
16.Gears & gear trains

Answer: nout = 1007 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 2900·40/72 = 1611 rpm = nC

Second stage

nout = 1611·25/40 = 1007 rpm

Answer

nout = 1007 rpm

total ratio = 2.88 : 1

17.Springs & pendulums

Answer: T = 3.296 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.7/9.81) = 3.296 s

Answer

T = 3.296 s
18.Springs & pendulums

Answer: A = 7.468 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Speed after impact

V = m·v/(m + M) = 0.008·350/2.008 = 1.394 m/s

Angular frequency

ω = √(k/(m + M)) = √(700/2.008) = 18.67 rad/s

Amplitude

A = V/ω = 1.394/18.67 = 0.07468 m = 7.468 cm

Answer

A = 7.468 cm
19.Mechanical vibrations

Answer: fd = 20.63 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(200000/10) = 141.4 rad/s
fn = 141.4/(2π) = 22.51 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 22.51·√(1 − 0.4²) = 20.63 Hz

Answer

fd = 20.63 Hz
20.Mechanical vibrations

Answer: fn = 1.805 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 60 + 30 = 90 kN/m
keq = 90·15/(90 + 15) = 12.86 kN/m

Natural frequency

ωn = √(12857/100) = 11.34 rad/s
fn = 11.34/(2π) = 1.805 Hz

Answer

fn = 1.805 Hz

ExamProblems · examproblems.com/courses/dynamics