Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = ?s = 1700 m

A plane needs a speed of 280 km/h to take off and the usable runway is 1700 m long. Starting from rest, what constant acceleration a does it need?

v₀ = 0v = 280 km/hs = 1700 m
a = m/s²
2.KinematicsHard
t (s)v (m/s)12 s

A tram starts from rest and accelerates at 2 m/s² for 12 s, then runs at constant speed for 21 s, and finally brakes at 5 m/s² until it stops. Find the total distance s between the two stops.

a1 = 2 m/s²t1 = 12 st2 = 21 sa3 = −5 m/s²
s = m
3.Newton’s lawsMedium
1.5 kg0.5 kg

Masses of 1.5 kg and 0.5 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the acceleration a of the masses.

m1 = 1.5 kgm2 = 0.5 kgg = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 35°blockv₀ = 10 m/s

A block is given a push so that it starts sliding up a ramp at 35° with a speed of 10 m/s. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 10 m/sθ = 35°μ = 0.1g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 30 m/s55°x = ?

A ball is launched at 55° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 30 m/sθ = 55°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 15 mv0​ = 30 m/s60°H = ?

A ball is launched at 30 m/s and 60° above the horizontal from the top of a 15 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 30 m/sθ = 60°h = 15 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 60 mvmax​ = ?

A car takes a flat curve of radius 60 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 60 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.2 mv = 5 m/s

A 2 kg ball on a string 1.2 m long is swung in a vertical circle. At the lowest point it moves at 5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 2 kgr = 1.2 mv = 5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
30°d = 16 mμ = 0.25

A block slides from rest down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.25. Find its speed v after it has slid 16 m along the slope.

θ = 30°μ = 0.25d = 16 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 3 mL = 3 mμ = 0.2k = 800 N/m

A 0.5 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3 m long (μ = 0.2) and then runs onto a spring (k = 800 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 0.5 kgh = 3 mL = 3 mμ = 0.2k = 800 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
4.5 kgv = ?8 gh = 13 cm

An 8 g bullet is fired horizontally into a 4.5 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 13 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 8 gM = 4.5 kgh = 13 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
1500 kgv1​ = ?2000 kg

A 1500 kg car runs into a parked 2000 kg car. The wrecks lock together and skid 19.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.8. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 1500 kgm2 = 2000 kgd = 19.5 mμ = 0.8g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
n = 1300 rpmTb​ = 145 N·mI = 27.5 kg·m²

A flywheel with a moment of inertia of 27.5 kg·m² spins at 1300 rpm. A brake applies a constant friction torque of 145 N·m. How long t does it take to stop?

I = 27.5 kg·m²n = 1300 rpmTb = 145 N·m
t = s
14.Rigid-body rotationHard
θ = 15°vs = 4.5 m

A hollow sphere starts from rest and rolls without slipping down a slope inclined at 15° to the horizontal. Use g = 9.81 m/s². Its radius is 0.15 m. Find its angular velocity ω after it has rolled 4.5 m along the slope.

θ = 15°s = 4.5 mI = (2/3)·m·r²g = 9.81 m/s²r = 0.15 m
ω = rad/s
15.Gears & gear trainsMedium
N1​ = 24N2​ = 50

A 4 kW motor running at 960 rpm drives a pinion with 24 teeth, which meshes with a gear with 50 teeth. The gear pair has an efficiency of 97%. Find the output torque T2 on the gear shaft.

P = 4 kWn1 = 960 rpmN1 = 24N2 = 50η = 97%
T2 = N·m
16.Gears & gear trainsHard
d1​ = 100 mmd2​ = 300 mm960 rpmC = 600 mmθ = ?

An open belt connects a 100 mm pulley and a 300 mm pulley whose centres are 600 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 100 mmd2 = 300 mmC = 600 mm
θ = °
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 2.4 s? Use g = 9.81 m/s². Find L.

T = 2.4 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
mk = 470 N/mA = 18 cmx = 12 cm

A mass on a spring with k = 470 N/m oscillates on a frictionless surface with an amplitude of 18 cm. Find the energy U stored in the spring when the mass is 12 cm from equilibrium.

k = 470 N/mA = 18 cmx = 12 cm
U = J
19.Mechanical vibrationsMedium
tx40 mm1 cycle27.4 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 40 mm is followed one cycle later by a peak of 27.4 mm. Find the damping ratio ζ.

x0 = 40 mmx1 = 27.4 mmn = 1
ζ =
20.Mechanical vibrationsHard
k1​ = 20k2​ = 20m = 100 kg

A 100 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 20 kN/m and the lower one k₂ = 20 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 20 kN/mk2 = 20 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: a = 1.779 m/s²

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v = 280/3.6 = 77.78 m/s

Acceleration

a = v²/(2s) = 77.78²/(2·1700) = 1.779 m/s²

Answer

a = 1.779 m/s²
2.Kinematics

Answer: s = 705.6 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Top speed

v = a1·t1 = 2·12 = 24 m/s

Distance of each phase

s1 = ½·2·12² = 144 m
s2 = 24·21 = 504 m
s3 = 24²/(2·5) = 57.6 m

Total distance

s = 144 + 504 + 57.6 = 705.6 m

Answer

s = 705.6 m
3.Newton’s laws

Answer: a = 4.905 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration

The net driving force is the difference of the weights; it moves the total mass.

a = (1.5 − 0.5)·9.81/(1.5 + 0.5) = 4.905 m/s²

Answer

a = 4.905 m/s²
4.Newton’s laws

Answer: d = 7.776 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 35° + 0.1·cos 35°) = 6.43 m/s²

Distance

d = v₀²/(2a) = 10²/(2·6.43) = 7.776 m

Answer

d = 7.776 m
5.Projectile motion

Answer: x = 86.21 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 30·cos 55° = 17.21 m/s
vy = v0·sin θ = 30·sin 55° = 24.57 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·24.57/9.81 = 5.01 s

Horizontal distance

x = vx·t = 17.21·5.01 = 86.21 m

Answer

x = 86.21 m
6.Projectile motion

Answer: H = 49.4 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 30·sin 60° = 25.98 m/s

Rise above the cliff

Δh = vy²/(2g) = 25.98²/(2·9.81) = 34.4 m

Height above the ground

H = 15 + 34.4 = 49.4 m

Answer

H = 49.4 m
7.Circular motion

Answer: vmax = 18.79 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·60) = 18.79 m/s

Answer

vmax = 18.79 m/s (67.65 km/h)
8.Circular motion

Answer: T = 61.29 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 2·9.81 + 2·5²/1.2 = 19.62 + 41.67 = 61.29 N

Answer

T = 61.29 N
9.Work & energy

Answer: v = 9.434 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·16·(0.5 − 0.25·0.866)) = 9.434 m/s

Answer

v = 9.434 m/s
10.Work & energy

Answer: x = 17.16 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 4.905·(3 − 0.2·3) = 11.77 J

Maximum compression

½kx² = 11.77 → x = √(2·11.77/800) = 0.1716 m = 17.16 cm

Answer

x = 17.16 cm
11.Momentum & collisions

Answer: v = 899.9 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.13) = 1.597 m/s

Collision

m·v = (m + M)·V → v = (0.008 + 4.5)·1.597/0.008 = 899.9 m/s

Answer

v = 899.9 m/s
12.Momentum & collisions

Answer: v1 = 40.82 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.8·9.81·19.5) = 17.49 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 3500·17.49/1500 = 40.82 m/s

Answer

v1 = 40.82 m/s
(147 km/h)
13.Rigid-body rotation

Answer: t = 25.82 s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1300/60 = 136.1 rad/s

Deceleration and time

α = Tb/I = 145/27.5 = 5.273 rad/s²
t = ω/α = 136.1/5.273 = 25.82 s

Answer

t = 25.82 s
14.Rigid-body rotation

Answer: ω = 24.69 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 4.5·sin 15° = 1.165 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.6667)
v = √(2·9.81·1.165/1.667) = 3.703 m/s
ω = v/r = 3.703/0.15 = 24.69 rad/s

Answer

ω = 24.69 rad/s
15.Gears & gear trains

Answer: T2 = 80.41 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 4000/100.5 = 39.79 N·m

Output torque

T2 = 39.79·50/24·0.97 = 80.41 N·m

Answer

T2 = 80.41 N·m
16.Gears & gear trains

Answer: θ = 160.8 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.1667) = 9.594°

Angle of wrap

θ = 180 − 2·9.594 = 160.8°

Answer

θ = 160.8°
17.Springs & pendulums

Answer: L = 1.431 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(2.4/2π)² = 1.431 m

Answer

L = 1.431 m
18.Springs & pendulums

Answer: U = 3.384 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Total energy

E = ½·k·A² = ½·470·0.18² = 7.614 J

Spring energy at x

U = ½·k·x² = ½·470·0.12² = 3.384 J

Answer

U = 3.384 J
19.Mechanical vibrations

Answer: ζ = 0.06011

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/1)·ln(40/27.4) = 0.3783

Damping ratio

ζ = δ/√(4π² + δ²) = 0.3783/√(39.48 + 0.1431) = 0.06011

Answer

ζ = 0.06011
20.Mechanical vibrations

Answer: fn = 1.592 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/20 + 1/20 → keq = 20·20/(20 + 20) = 10 kN/m

Natural frequency

ωn = √(10000/100) = 10 rad/s
fn = 10/(2π) = 1.592 Hz

Answer

fn = 1.592 Hz

ExamProblems · examproblems.com/courses/dynamics