Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = 3.75 m/s²s = 600 m

A plane starts from rest and accelerates uniformly at 3.75 m/s² along a runway. Find its speed v after 600 m.

v₀ = 0a = 3.75 m/s²s = 600 m
v = m/s
2.KinematicsHard
v₀ = 9 m/s5 m

A ball is thrown straight up at 9 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 9 m/sh₀ = 5 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 35°25 kgF = ?

A 25 kg box is pushed up a ramp at 35° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the pushing force F.

m = 25 kgθ = 35°μ = 0.15g = 9.81 m/s²
F = N
4.Newton’s lawsHard
m1​ = 5 kg3.5 kgμ = 0.3

A 5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3.5 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 5 kgm2 = 3.5 kgμ = 0.3g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 18 m/s40°rangeH = ?

A ball is launched at 40° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 18 m/sθ = 40°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 5 mv0​ = 14 m/s45°H = ?

A ball is launched at 14 m/s and 45° above the horizontal from the top of a 5 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 14 m/sθ = 45°h = 5 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 60 mvmax​ = ?

A car takes a flat curve of radius 60 m. The coefficient of static friction between tyres and road is 0.8. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 60 mμs = 0.8g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.7 m9 m/svtop​ = ?

A 1 kg ball on a light string 0.7 m long is swung in a vertical circle. At the lowest point its speed is 9 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 1 kgr = 0.7 mvbottom = 9 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
30°L = 1 m1 kg

A 1 kg ball hangs on a light string of length 1 m. It is pulled aside until the string makes 30° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.

m = 1 kgL = 1 mθ = 30°g = 9.81 m/s²
T = N
10.Work & energyHard
h = 5 mL = 2.5 mμ = 0.1k = 2000 N/m

A 0.5 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.1) and then runs onto a spring (k = 2000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 0.5 kgh = 5 mL = 2.5 mμ = 0.1k = 2000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
1400 kg22 m/s1200 kg

A 1400 kg car moving at 22 m/s runs into a stationary 1200 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 1400 kgv1 = 22 m/sm2 = 1200 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
1100 kgv1​ = ?1200 kg

A 1100 kg car runs into a parked 1200 kg car. The wrecks lock together and skid 12.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 1100 kgm2 = 1200 kgd = 12.5 mμ = 0.7g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
n = 2300 rpmTb​ = 125 N·mI = 31 kg·m²

A flywheel with a moment of inertia of 31 kg·m² spins at 2300 rpm. A brake applies a constant friction torque of 125 N·m. How many revolutions N does the flywheel make before it stops?

I = 31 kg·m²n = 2300 rpmTb = 125 N·m
N = rev
14.Rigid-body rotationHard
0.65 m0.2 mn1​ = 30 rpm

A person stands on a frictionless turntable and holds a 4.5 kg dumbbell in each hand, 0.65 m from the axis. The person and turntable alone have a moment of inertia of 4.5 kg·m² about the axis. They turn at 30 rpm, then pull the dumbbells in to 0.2 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.

I0 = 4.5 kg·m²m = 2 × 4.5 kgr1 = 0.65 mr2 = 0.2 mn1 = 30 rpm
n2 = rpm
15.Gears & gear trainsMedium
d1​ = 125 mmd2​ = 300 mm1440 rpmn2​ = ?

A 125 mm pulley at 1440 rpm drives a 300 mm pulley by a belt with 3 % slip. Find the speed n2 of the driven pulley.

n1 = 1440 rpmd1 = 125 mmd2 = 300 mms = 3 %
n2 = rpm
16.Gears & gear trainsHard
d1​ = 125 mmd2​ = 315 mm720 rpmC = 1200 mmT1​ = 2000 NT2​P = ?

An open belt connects a 125 mm driving pulley at 720 rpm to a 315 mm pulley; the centres are 1200 mm apart. The coefficient of friction is 0.3 and the tight-side tension may not exceed 2000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 125 mmn1 = 720 rpmd2 = 315 mmC = 1200 mmμ = 0.3T1 = 2000 N
P = kW
17.Springs & pendulumsMedium
t (s)x (cm)0.45 s

A 3.9 kg mass on a spring with k = 400 N/m is pulled 4 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 0.45 s (with sign).

m = 3.9 kgk = 400 N/mA = 4 cmt = 0.45 s
x = cm
18.Springs & pendulumsHard
2 kgk = 210 N/m

A 2 kg mass is attached to the lower end of an unstretched vertical spring with k = 210 N/m and released from rest. Use g = 9.81 m/s². Find the greatest extension xmax of the spring in cm.

m = 2 kgk = 210 N/mg = 9.81 m/s²
xmax = cm
19.Mechanical vibrationsMedium
tx20 mm4 cycles5.7 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 20 mm is followed 4 cycles later by a peak of 5.7 mm. Find the damping ratio ζ.

x0 = 20 mmx4 = 5.7 mmn = 4
ζ =
20.Mechanical vibrationsHard
k1​ = 100k2​ = 10k3​ = 30m = 50 kg

A 50 kg mass hangs from spring k₃ = 30 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 100 kN/m and k₂ = 10 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 100 kN/mk2 = 10 kN/mk3 = 30 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: v = 67.08 m/s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Speed after the distance

v = √(2·a·s) = √(2·3.75·600) = 67.08 m/s

Answer

v = 67.08 m/s
(241.5 km/h)
2.Kinematics

Answer: t = 2.282 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−5 = 9·t − ½·9.81·t²
4.905·t² − 9·t − 5 = 0

Solve the quadratic

Only the positive root is physical.

t = (9 + √(9² + 2·9.81·5))/9.81 = 2.282 s

Answer

t = 2.282 s
3.Newton’s laws

Answer: F = 170.8 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Constant speed: the forces balance.

F = m·g·sin θ + μ·m·g·cos θ

Pushing force

F = 140.7 + 30.13 = 170.8 N

Answer

F = 170.8 N
4.Newton’s laws

Answer: a = 2.308 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (34.34 − 14.71)/8.5 = 2.308 m/s²

Answer

a = 2.308 m/s²
5.Projectile motion

Answer: H = 6.823 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 18·cos 40° = 13.79 m/s
vy = v0·sin θ = 18·sin 40° = 11.57 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 11.57²/(2·9.81) = 6.823 m

Answer

H = 6.823 m
6.Projectile motion

Answer: H = 9.995 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 14·sin 45° = 9.899 m/s

Rise above the cliff

Δh = vy²/(2g) = 9.899²/(2·9.81) = 4.995 m

Height above the ground

H = 5 + 4.995 = 9.995 m

Answer

H = 9.995 m
7.Circular motion

Answer: vmax = 21.7 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.8·9.81·60) = 21.7 m/s

Answer

vmax = 21.7 m/s (78.12 km/h)
8.Circular motion

Answer: Ttop = 66.66 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 9² − 4·9.81·0.7 = 53.53 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 1·53.53/0.7 − 1·9.81 = 66.66 N

Answer

Ttop = 66.66 N
9.Work & energy

Answer: T = 12.44 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the bottom

v² = 2gL(1 − cos θ) = 2·9.81·1·(1 − cos 30°) = 2.629 m²/s²

Forces at the bottom

m·g = 1·9.81 = 9.81 N
T = mg + mv²/L = 9.81 + 1·2.629/1 = 12.44 N

Answer

T = 12.44 N

Check: T = mg(3 − 2cos θ) = 12.44 N.

10.Work & energy

Answer: x = 15.26 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 4.905·(5 − 0.1·2.5) = 23.3 J

Maximum compression

½kx² = 23.3 → x = √(2·23.3/2000) = 0.1526 m = 15.26 cm

Answer

x = 15.26 cm
11.Momentum & collisions

Answer: ΔK = 156369 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1400·22/2600 = 11.85 m/s

Kinetic energy before and after

Kbefore = ½·1400·22² = 338800 J
Kafter = ½·2600·11.85² = 182431 J

Energy lost

ΔK = 338800 − 182431 = 156369 J

Answer

ΔK = 156369 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: v1 = 27.4 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.7·9.81·12.5) = 13.1 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 2300·13.1/1100 = 27.4 m/s

Answer

v1 = 27.4 m/s
(98.63 km/h)
13.Rigid-body rotation

Answer: N = 1145 rev

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·2300/60 = 240.9 rad/s

Work of the brake equals the kinetic energy

½·I·ω² = ½·31·240.9² = 899176 J
θ = 899176/125 = 7193 rad

Revolutions

N = θ/2π = 1145 rev

Answer

N = 1145 rev
14.Rigid-body rotation

Answer: n2 = 51.25 rpm

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = 4.5 + 2·4.5·0.65² = 8.303 kg·m²
I2 = 4.5 + 2·4.5·0.2² = 4.86 kg·m²

Conservation of angular momentum

n2 = n1·I1/I2 = 30·8.303/4.86 = 51.25 rpm

Answer

n2 = 51.25 rpm

The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.

15.Gears & gear trains

Answer: n2 = 582 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1440·125/300 = 600 rpm

With slip

n2 = 600·0.97 = 582 rpm

Answer

n2 = 582 rpm
16.Gears & gear trains

Answer: P = 5.573 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.983 rad

Slack-side tension

eμθ = e0.8949 = 2.447, T₂ = 2000/2.447 = 817.3 N

Power

P = (2000 − 817.3)·4.712 = 5.573 kW

Answer

P = 5.573 kW
17.Springs & pendulums

Answer: x = −0.6178 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(400/3.9) = 10.13 rad/s
ω·t = 10.13·0.45 = 4.557 rad

Displacement

x = A·cos(ω·t) = 4·cos(4.557) = −0.6178 cm

Answer

x = −0.6178 cm
18.Springs & pendulums

Answer: xmax = 18.69 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 2·9.81/210 = 0.09343 m = A

Lowest point

xmax = 2A = 0.1869 m = 18.69 cm

Answer

xmax = 18.69 cm
19.Mechanical vibrations

Answer: ζ = 0.04988

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/4)·ln(20/5.7) = 0.3138

Damping ratio

ζ = δ/√(4π² + δ²) = 0.3138/√(39.48 + 0.09848) = 0.04988

Answer

ζ = 0.04988
20.Mechanical vibrations

Answer: fn = 3.456 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 100 + 10 = 110 kN/m
keq = 110·30/(110 + 30) = 23.57 kN/m

Natural frequency

ωn = √(23571/50) = 21.71 rad/s
fn = 21.71/(2π) = 3.456 Hz

Answer

fn = 3.456 Hz

ExamProblems · examproblems.com/courses/dynamics