In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A driver moving at 60 km/h sees an obstacle. Her reaction time is 0.8 s, after which the car brakes with a constant deceleration of 6.5 m/s². Find the total stopping distance d from the moment she sees the obstacle.
v₀ = 60 km/htr = 0.8 sa = −6.5 m/s²
d = m
2.KinematicsHard
A ball is thrown straight up at 19 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 19 m/sh₀ = 5 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 20 kg box is pushed up a ramp at 15° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the pushing force F.
m = 20 kgθ = 15°μ = 0.2g = 9.81 m/s²
F = N
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 85 N pulls the front 1 kg block; the 3 kg block is towed behind. The coefficient of kinetic friction is 0.1 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.
m1 = 3 kgm2 = 1 kgF = 85 Nμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched from level ground at 50° above the horizontal and lands 10 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.
θ = 50°R = 10 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
A ball is launched at 40° above horizontal from the top of a 45 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 28 m/sθ = 40°h = 45 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A car takes a flat curve of radius 50 m. The coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 50 mμs = 0.4g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 0.3 kg ball on a string 1.3 m long is swung in a vertical circle. At the lowest point it moves at 3.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 0.3 kgr = 1.3 mv = 3.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
A 0.5 kg ball hangs on a light string of length 2 m. It is pulled aside until the string makes 45° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.
m = 0.5 kgL = 2 mθ = 45°g = 9.81 m/s²
T = N
10.Work & energyHard
A 1 kg block is released from rest at height 2 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4.5 m long (μ = 0.25) and then runs onto a spring (k = 2000 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 1 kgh = 2 mL = 4.5 mμ = 0.25k = 2000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
A 3.5 kg glider moving at 9 m/s makes a perfectly elastic head-on collision with a 4.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 3.5 kgm2 = 4.5 kgv1 = 9 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
A 0.25 kg ball hits a wall at 19 m/s and bounces straight back at 9 m/s. The contact lasts 40 ms. Find the average force Favg of the wall on the ball.
m = 0.25 kgvin = 19 m/svout = 9 m/sΔt = 40 ms
Favg = N
13.Rigid-body rotationMedium
A flywheel with a moment of inertia of 9 kg·m² spins at 2800 rpm. A brake applies a constant friction torque of 155 N·m. How long t does it take to stop?
I = 9 kg·m²n = 2800 rpmTb = 155 N·m
t = s
14.Rigid-body rotationHard
A person stands on a frictionless turntable and holds a 3 kg dumbbell in each hand, 0.8 m from the axis. The person and turntable alone have a moment of inertia of 1.5 kg·m² about the axis. They turn at 50 rpm, then pull the dumbbells in to 0.25 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.
A 0.75 kW motor running at 1450 rpm drives a pinion with 45 teeth, which meshes with a gear with 48 teeth. The gear pair has an efficiency of 96%. Find the output torque T2 on the gear shaft.
P = 0.75 kWn1 = 1450 rpmN1 = 45N2 = 48η = 96%
T2 = N·m
16.Gears & gear trainsHard
An open belt connects an 80 mm pulley and a 400 mm pulley whose centres are 800 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.
d1 = 80 mmd2 = 400 mmC = 800 mm
θ = °
17.Springs & pendulumsMedium
A 1.3 kg mass on a spring with k = 170 N/m oscillates on a frictionless surface with an amplitude of 19 cm. Find its speed v when it is 2 cm from equilibrium.
m = 1.3 kgk = 170 N/mA = 19 cmx = 2 cm
v = m/s
18.Springs & pendulumsHard
A body oscillates in simple harmonic motion with period 1.8 s and amplitude 15 cm. What is the shortest time t it needs to move from equilibrium to a displacement of 6 cm?
T = 1.8 sA = 15 cmx = 6 cm
t = s
19.Mechanical vibrationsMedium
A 2 kg mass on a spring with a stiffness of 5 kN/m has a viscous damper giving a damping ratio of 0.5. Find the damped natural frequency fd of its free vibration in Hz.
m = 2 kgk = 5 kN/mζ = 0.5
fd = Hz
20.Mechanical vibrationsHard
A 20 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 80 kN/m and k₂ = 30 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.
m = 20 kgk1 = 80 kN/mk2 = 30 kN/m
keq = kN/m
3Solutions
1.Kinematics
Answer: d = 34.7 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 60/3.6 = 16.67 m/s
Reaction distance
d1 = v₀·tr = 16.67·0.8 = 13.33 m
Braking distance
d2 = v₀²/(2a) = 16.67²/(2·6.5) = 21.37 m
Total
d = 13.33 + 21.37 = 34.7 m
Answer
d = 34.7 m
2.Kinematics
Answer: t = 4.121 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−5 = 19·t − ½·9.81·t²
4.905·t² − 19·t − 5 = 0
Solve the quadratic
Only the positive root is physical.
t = (19 + √(19² + 2·9.81·5))/9.81 = 4.121 s
Answer
t = 4.121 s
3.Newton’s laws
Answer: F = 88.68 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the slope
Constant speed: the forces balance.
F = m·g·sin θ + μ·m·g·cos θ
Pushing force
F = 50.78 + 37.9 = 88.68 N
Answer
F = 88.68 N
4.Newton’s laws
Answer: T = 63.75 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).
5.Projectile motion
Answer: v0 = 9.981 m/s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Solve the range formula for v₀
v₀ = √(g·R/sin 2θ) = √(9.81·10/sin 100°) = 9.981 m/s
Answer
v0 = 9.981 m/s
6.Projectile motion
Answer: x = 115.3 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 28·cos 40° = 21.45 m/s
vy = v0·sin θ = 28·sin 40° = 18 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 45 + 18·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (18 + √(323.9 + 882.9))/9.81 = 5.376 s
Horizontal distance
x = vx·t = 21.45·5.376 = 115.3 m
Answer
x = 115.3 m
7.Circular motion
Answer: vmax = 14.01 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.4·9.81·50) = 14.01 m/s
Answer
vmax = 14.01 m/s (50.43 km/h)
8.Circular motion
Answer: T = 5.77 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 0.3·9.81 + 0.3·3.5²/1.3 = 2.943 + 2.827 = 5.77 N
Answer
T = 5.77 N
9.Work & energy
Answer: T = 7.778 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the bottom
v² = 2gL(1 − cos θ) = 2·9.81·2·(1 − cos 45°) = 11.49 m²/s²
Forces at the bottom
m·g = 0.5·9.81 = 4.905 N
T = mg + mv²/L = 4.905 + 0.5·11.49/2 = 7.778 N
Answer
T = 7.778 N
Check: T = mg(3 − 2cos θ) = 7.778 N.
10.Work & energy
Answer: x = 9.265 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 9.81·(2 − 0.25·4.5) = 8.584 J
Maximum compression
½kx² = 8.584 → x = √(2·8.584/2000) = 0.09265 m = 9.265 cm
Answer
x = 9.265 cm
11.Momentum & collisions
Answer: v′2 = 7.875 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (3.5 − 4.5)/(3.5 + 4.5)·9 = −1.125 m/s
v′2 = 2·3.5/(3.5 + 4.5)·9 = 7.875 m/s
Answer
v′2 = 7.875 m/s
12.Momentum & collisions
Answer: Favg = 175 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.25·(9 + 19) = 7 N·s
Average force
Favg = J/Δt = 7/0.04 = 175 N
Answer
Favg = 175 N
13.Rigid-body rotation
Answer: t = 17.03 s
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·2800/60 = 293.2 rad/s
Deceleration and time
α = Tb/I = 155/9 = 17.22 rad/s²
t = ω/α = 293.2/17.22 = 17.03 s
Answer
t = 17.03 s
14.Rigid-body rotation
Answer: n2 = 142.4 rpm
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Moments of inertia
I1 = 1.5 + 2·3·0.8² = 5.34 kg·m²
I2 = 1.5 + 2·3·0.25² = 1.875 kg·m²
Conservation of angular momentum
n2 = n1·I1/I2 = 50·5.34/1.875 = 142.4 rpm
Answer
n2 = 142.4 rpm
The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.
15.Gears & gear trains
Answer: T2 = 5.058 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Motor torque
ω₁ = 2π·1450/60 = 151.8 rad/s
T1 = P/ω₁ = 750/151.8 = 4.939 N·m
Output torque
T2 = 4.939·48/45·0.96 = 5.058 N·m
Answer
T2 = 5.058 N·m
16.Gears & gear trains
Answer: θ = 156.9 °
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt angle
asin(0.2) = 11.54°
Angle of wrap
θ = 180 − 2·11.54 = 156.9°
Answer
θ = 156.9°
17.Springs & pendulums
Answer: v = 2.161 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(170/1.3) = 11.44 rad/s
Speed at x
v = ω·√(A² − x²) = 11.44·√(0.19² − 0.02²) = 2.161 m/s
Answer
v = 2.161 m/s
18.Springs & pendulums
Answer: t = 0.1179 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = 2π/T = 2π/1.8 = 3.491 rad/s
Solve for the time
0.4 = sin(ω·t) → ω·t = arcsin(0.4) = 0.4115 rad
t = 0.4115/3.491 = 0.1179 s
Answer
t = 0.1179 s
19.Mechanical vibrations
Answer: fd = 6.892 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(5000/2) = 50 rad/s
fn = 50/(2π) = 7.958 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 7.958·√(1 − 0.5²) = 6.892 Hz
Answer
fd = 6.892 Hz
20.Mechanical vibrations
Answer: keq = 110 kN/m
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.