Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?27.78

A car driving at 100 km/h brakes with a constant deceleration of 4 m/s² until it stops. How long does braking take? Find t.

v₀ = 100 km/ha = −4 m/s²v = 0
t = s
2.KinematicsHard
t (s)v (m/s)7 s

A tram starts from rest and accelerates at 1.5 m/s² for 7 s, then runs at constant speed for 27 s, and finally brakes at 2.5 m/s² until it stops. Find the total distance s between the two stops.

a1 = 1.5 m/s²t1 = 7 st2 = 27 sa3 = −2.5 m/s²
s = m
3.Newton’s lawsMedium
θ = 35°a = ?m = 17 kg

A 17 kg block slides down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 17 kgθ = 35°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 30°blockv₀ = 3 m/s

A block is given a push so that it starts sliding up a ramp at 30° with a speed of 3 m/s. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 3 m/sθ = 30°μ = 0.3g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 20 m/s70°x = ?

A ball is launched at 70° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 20 m/sθ = 70°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 30 mv0​ = 27 m/s45°H = ?

A ball is launched at 27 m/s and 45° above the horizontal from the top of a 30 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 27 m/sθ = 45°h = 30 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 80 mvmax​ = ?

A car takes a flat curve of radius 80 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 80 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
θ = 20°to centrevmax​ = ?

A curve of radius 110 m is banked at 20°, and the coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.

r = 110 mθ = 20°μs = 0.4g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
45°d = 13 mμ = 0.1

A block slides from rest down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.1. Find its speed v after it has slid 13 m along the slope.

θ = 45°μ = 0.1d = 13 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
8 kg2 kgμ = 0.1d = 2.5 m

An 8 kg block rests on a rough horizontal table (μ = 0.1). A light string runs from it over a smooth pulley at the edge of the table to a hanging 2 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 2.5 m.

m1 = 8 kgm2 = 2 kgμ = 0.1d = 2.5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
6 kg41 m/s3 kgv′2​ = ?

A 9 kg projectile moving horizontally at 16 m/s explodes into two fragments that move along the same line. The 6 kg fragment continues forwards at 41 m/s. Find the velocity v′2 of the 3 kg fragment (positive in the original direction).

M = 9 kgu = 16 m/sm1 = 6 kgv′1 = 41 m/sm2 = 3 kg
v′2 = m/s
12.Momentum & collisionsHard
1900 kg23 m/s1700 kg8 m/sv′ = ?

At a crossing a 1900 kg car travelling east at 23 m/s collides with a 1700 kg car travelling north at 8 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.

m1 = 1900 kgv1 = 23 m/s (E)m2 = 1700 kgv2 = 8 m/s (N)
v′ = m/s
13.Rigid-body rotationMedium
n = 1000 rpmT = 360 N·m

A motor delivers a torque of 360 N·m at 1000 rpm. Find its power output P in kW.

T = 360 N·mn = 1000 rpm
P = kW
14.Rigid-body rotationHard
θ = 30°as = 7 m

A hollow sphere rolls without slipping down a slope inclined at 30° to the horizontal. Use g = 9.81 m/s². It starts from rest. How long t does it take to roll 7 m down the slope?

θ = 30°I = (2/3)·m·r²g = 9.81 m/s²s = 7 m
t = s
15.Gears & gear trainsMedium
N1​ = 25, m = 5 mm

A 3 kW motor running at 960 rpm drives a pinion with 25 teeth and a module of 5 mm. Find the tangential force Ft on the pinion teeth.

P = 3 kWn = 960 rpmN1 = 25m = 5 mm
Ft = N
16.Gears & gear trainsHard
d1​ = 150 mmd2​ = 300 mm1500 rpmC = 800 mmT1​ = 1500 NT2​P = ?

An open belt connects a 150 mm driving pulley at 1500 rpm to a 300 mm pulley; the centres are 800 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 1500 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 150 mmn1 = 1500 rpmd2 = 300 mmC = 800 mmμ = 0.25T1 = 1500 N
P = kW
17.Springs & pendulumsMedium
L = 0.6 m

A simple pendulum has a length of 0.6 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 0.6 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
3.9 kgk = 60 N/mA = 18 cm

A 3.9 kg mass on a spring with k = 60 N/m is pulled 18 cm from equilibrium and released. Find its maximum speed vmax.

m = 3.9 kgk = 60 N/mA = 18 cm
vmax = m/s
19.Mechanical vibrationsMedium
tx30 mm2 cycles6.6 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 30 mm is followed 2 cycles later by a peak of 6.6 mm. Find the damping ratio ζ.

x0 = 30 mmx2 = 6.6 mmn = 2
ζ =
20.Mechanical vibrationsHard
k1​ = 10k2​ = 100m = 5 kg

A 5 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 10 kN/m and k₂ = 100 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 5 kgk1 = 10 kN/mk2 = 100 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: t = 6.944 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 100/3.6 = 27.78 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 27.78/4 = 6.944 s

Answer

t = 6.944 s
2.Kinematics

Answer: s = 342.3 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Top speed

v = a1·t1 = 1.5·7 = 10.5 m/s

Distance of each phase

s1 = ½·1.5·7² = 36.75 m
s2 = 10.5·27 = 283.5 m
s3 = 10.5²/(2·2.5) = 22.05 m

Total distance

s = 36.75 + 283.5 + 22.05 = 342.3 m

Answer

s = 342.3 m
3.Newton’s laws

Answer: a = 3.216 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 35° − 0.3·cos 35°) = 9.81·(0.5736 − 0.2457) = 3.216 m/s²

Answer

a = 3.216 m/s²
4.Newton’s laws

Answer: d = 0.6037 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 30° + 0.3·cos 30°) = 7.454 m/s²

Distance

d = v₀²/(2a) = 3²/(2·7.454) = 0.6037 m

Answer

d = 0.6037 m
5.Projectile motion

Answer: x = 26.21 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 20·cos 70° = 6.84 m/s
vy = v0·sin θ = 20·sin 70° = 18.79 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·18.79/9.81 = 3.832 s

Horizontal distance

x = vx·t = 6.84·3.832 = 26.21 m

Answer

x = 26.21 m
6.Projectile motion

Answer: H = 48.58 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 27·sin 45° = 19.09 m/s

Rise above the cliff

Δh = vy²/(2g) = 19.09²/(2·9.81) = 18.58 m

Height above the ground

H = 30 + 18.58 = 48.58 m

Answer

H = 48.58 m
7.Circular motion

Answer: vmax = 21.7 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·80) = 21.7 m/s

Answer

vmax = 21.7 m/s (78.12 km/h)
8.Circular motion

Answer: vmax = 31.06 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points down the slope.

N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g

Speed

v = √(110·9.81·0.7179/0.8029) = 31.06 m/s

Answer

vmax = 31.06 m/s
(111.8 km/h)
9.Work & energy

Answer: v = 12.74 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·13·(0.7071 − 0.1·0.7071)) = 12.74 m/s

Answer

v = 12.74 m/s
10.Work & energy

Answer: v = 2.426 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 19.62·2.5 = 49.05 J
μ·m₁g·d = 0.1·78.48·2.5 = 19.62 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 29.43 → v = √(2·29.43/10) = 2.426 m/s

Answer

v = 2.426 m/s
11.Momentum & collisions

Answer: v′2 = −34 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 9·16 = 144 kg·m/s

Momentum after

144 = 6·41 + 3·v′2
v′2 = (144 − 246)/3 = −34 m/s

Answer

v′2 = −34 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: v′ = 12.71 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1900·23 = 43700 kg·m/s
py = 1700·8 = 13600 kg·m/s

Speed of the wreck

v′ = √(px² + py²)/(m1 + m2) = 45767/3600 = 12.71 m/s

Answer

v′ = 12.71 m/s
13.Rigid-body rotation

Answer: P = 37.7 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1000/60 = 104.7 rad/s

Power

P = T·ω = 360·104.7 = 37699 W = 37.7 kW

Answer

P = 37.7 kW
14.Rigid-body rotation

Answer: t = 2.181 s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.6667·m·r²·(a/r) → f = 0.6667·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 30°/1.667 = 2.943 m/s²

Time

s = ½·a·t² → t = √(2·7/2.943) = 2.181 s

Answer

t = 2.181 s
15.Gears & gear trains

Answer: Ft = 477.5 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·960/60 = 100.5 rad/s
T = P/ω = 3000/100.5 = 29.84 N·m

Pitch diameter

d = m·N = 5·25 = 125 mm

Tangential force

Ft = 2T/d = 2·29.84/0.125 = 477.5 N

Answer

Ft = 477.5 N
16.Gears & gear trains

Answer: P = 9.227 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.954 rad

Slack-side tension

eμθ = e0.7385 = 2.093, T₂ = 1500/2.093 = 716.8 N

Power

P = (1500 − 716.8)·11.78 = 9.227 kW

Answer

P = 9.227 kW
17.Springs & pendulums

Answer: T = 1.554 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(0.6/9.81) = 1.554 s

Answer

T = 1.554 s
18.Springs & pendulums

Answer: vmax = 0.706 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(60/3.9) = 3.922 rad/s

Maximum speed

vmax = A·ω = 0.18·3.922 = 0.706 m/s

Answer

vmax = 0.706 m/s
19.Mechanical vibrations

Answer: ζ = 0.1196

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/2)·ln(30/6.6) = 0.7571

Damping ratio

ζ = δ/√(4π² + δ²) = 0.7571/√(39.48 + 0.5731) = 0.1196

Answer

ζ = 0.1196
20.Mechanical vibrations

Answer: keq = 110 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 10 + 100 = 110 kN/m

Answer

keq = 110 kN/m

ExamProblems · examproblems.com/courses/dynamics