Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).
Differential equations
Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m
Matrices & determinants
2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)
Vectors: dot & cross product
Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|
Method
Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.
Probability
Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Normal distribution
z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ
Method
Convert the value to a z-score: z = (x − μ)/σ.
Look up Φ(z), the area to the left of z.
For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
For a percentile, work backwards: find z for the area, then x = μ + z·σ.
2Practice problems
1.LimitsMedium
Find the limit L = limx→∞ (3x3 + 6x − 6)/(5x3 + 5x + 4).
f(x) = (3x3 + 6x − 6)/(5x3 + 5x + 4)x → ∞
L =
2.LimitsHard
Find the limit L = limx→0 (1 − cos 5x)/(x²), with x in radians.
f(x) = (1 − cos 5x)/(x²)x → 0
L =
3.DerivativesMedium
Let f(x) = ln(2x2 + 4). Find f′(1).
f(x) = ln(2x2 + 4)x = 1
f′(1) =
4.DerivativesHard
Let f(x) = x3 − 12x + 6. Find the x-coordinate x of the local minimum.
f(x) = x3 − 12x + 6
x =
5.IntegralsMedium
The region under y = √(x) from x = 0 to x = 3 is rotated about the x-axis. Find the volume V of the solid (a paraboloid).
y = √(x)0 ≤ x ≤ 3
V =
6.IntegralsHard
Find the area A of the region between the parabola y = 1 − x² and the x-axis.
y = 1 − x²
A =
7.Complex numbersMedium
Write z = −8 + j8 in exponential form r·ejθ. Give θ in radians, between −π and π.
z = −8 + j8
θ = rad
8.Complex numbersHard
Find the real part of (−2 + j3)³.
z = −2 + j3n = 3
Re(z³) =
9.Differential equationsMedium
Solve y″ + 8y′ + 15y = 0 with y(0) = 1 and y′(0) = 0. Find y(2).
y″ + 8y′ + 15y = 0y(0) = 1y′(0) = 0
y(2) =
10.Differential equationsHard
A system obeys y″ + 4y′ + 8y = 8 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find y(0.75); angles in radians.
y″ + 4y′ + 8y = 8y(0) = 0y′(0) = 0
y(0.75) =
11.Matrices & determinantsMedium
Let C = AB for the matrices shown. Find the entry c11 (row 1, column 1).
A = [−5 −6; 4 −3]B = [6 2; 6 1]
c11 =
12.Matrices & determinantsHard
Solve the system 3x − 5y = −6 and 6x + y = 0. Find x.
3x − 5y = −66x + y = 0
x =
13.Vectors: dot & cross productMedium
A constant force F = (5, −5, 10) N acts on an object while it moves in a straight line from point A(−2, −5, 3) to point B(−3, −2, 3). Coordinates are in metres. Find the work W done by the force.
F = (5, −5, 10) NA(−2, −5, 3) mB(−3, −2, 3) m
W = J
14.Vectors: dot & cross productHard
A force F = (0, 30, −60) N acts at point A(−3, 3, 4). Coordinates are in metres. Find the z-component Mz of the moment of the force about the origin O(0, 0, 0).
F = (0, 30, −60) NA(−3, 3, 4) mO(0, 0, 0) m
Mz = N·m
15.ProbabilityMedium
A fair die is rolled 6 times. What is the probability P of getting at least one six?
n = 6
P =
16.ProbabilityHard
A game costs €1 to play. You win €2 with probability 0.15 and €10 with probability 0.05; otherwise you win nothing. The stake is not returned. Find the expected net gain E(G) per game.
stake = €1€2: p = 0.15€10: p = 0.05
E(G) = €
17.Descriptive statisticsMedium
Find the sample standard deviation s of the data: 51, 50, 35, 31, 32, 19, 44.
n = 7
s =
18.Descriptive statisticsHard
A quantity is normally distributed with mean 100 and standard deviation 15. What proportion P of values is below 109?
μ = 100σ = 15x = 109
P =
19.Normal distributionMedium
The IQ scores are normally distributed with mean 100 points and standard deviation 15 points. What fraction lies between 93.25 and 123.25 points? Give P as a decimal.
μ = 100σ = 15x1 = 93.25x2 = 123.25
P =
20.Normal distributionHard
The delivery times are normally distributed with mean 32 min and standard deviation 6 min. Find the value x below which 80% of them lie (the 80th percentile).
μ = 32σ = 6P = 80%
x = min
3Solutions
1.Limits
Answer: L = 0.6
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
Divide by the highest power
(3 + 6/x2 + (−6)/x3)/(5 + 5/x2 + 4/x3)
Let x → ∞
L = 3/5 = 0.6
Answer
L = 0.6
For equal degrees the limit is the ratio of the leading coefficients.
2.Limits
Answer: L = 12.5
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
First application
5·sin 5x/(2x) → 0/0
Second application
25·cos 5x/2
Substitute x = 0
L = 25/2 = 12.5
Answer
L = 12.5
3.Derivatives
Answer: f′(1) = 0.6667
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Chain rule for the logarithm
f′(x) = 4x/(2x2 + 4)
Substitute
f′(1) = 4/6 = 0.6667
Answer
f′(1) = 0.6667
4.Derivatives
Answer: x = 2
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Derivative
f′(x) = 3x2 − 12 = 3·(x2 − 4)
Solve f′(x) = 0
x = −2 or x = 2
Which one is which
f″(x) = 6x: negative at a maximum, positive at a minimum.
f″(−2) = −12, f″(2) = 12
x = 2
Answer
x = 2
5.Integrals
Answer: V = 14.14
Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.
Disc method
V = π∫₀3 x dx
Integrate
V = π·1·3²/2 = 14.14
Answer
V = 14.14
6.Integrals
Answer: A = 1.333
Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.
Zeros
1 − x² = 0 → x = ±1
Integrate
A = [1x − x³/3]−11 = 0.6667 − (−0.6667) = 1.333
Answer
A = 1.333
7.Complex numbers
Answer: θ = 2.356 rad
Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.
Modulus
r = √(64 + 64) = 11.31
Argument in radians
θ = 135° = 135·π/180 = 2.356 rad
Exponential form
z = 11.31·ej2.356
Answer
θ = 2.356 rad
8.Complex numbers
Answer: Re(z³) = 46
De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.
Powers step by step
z² = (−2 + j3)(−2 + j3) = −5 − j12
z³ = (−5 − j12)(−2 + j3) = 46 + j9
Check with De Moivre
z = 3.606∠123.7° → z³ = 46.87∠11.07°
Re(z³) = 46
Answer
Re(z³) = 46
9.Differential equations
Answer: y(2) = 0.006129
Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.
Characteristic roots
(r + 3)(r + 5) = 0 → r = −3, −5
Constants from the initial values
A + B = 1, −3A − 5B = 0
A = 2.5, B = −1.5
Evaluate
y(2) = 2.5·e−6 + (−1.5)·e−10 = 0.006129
Answer
y(2) = 0.006129
10.Differential equations
Answer: y(0.75) = 0.7616
Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Row times column
c11 = (−5)·6 + (−6)·6 = −66
Answer
c11 = −66
12.Matrices & determinants
Answer: x = −0.1818
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Determinant of the coefficient matrix
det A = 3·1 − (−5)·6 = 33
Replace the x column
det Aₓ = (−6)·1 − (−5)·0 = −6
x = −6/33 = −0.1818
Answer
x = −0.1818
y = 1.091
13.Vectors: dot & cross product
Answer: W = −20 J
Dot product:a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.
Displacement
d = B − A = (−3, −2, 3) − (−2, −5, 3) = (−1, 3, 0) m
Work
W = F·d = 5·(−1) + (−5)·3 + 10·0 = −20 J
Answer
W = −20 J
Negative work: the force acts mostly against the motion.
14.Vectors: dot & cross product
Answer: Mz = −90 N·m
Cross product:a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.
Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.
Complement
P(no six) = (5/6)6 = 0.3349
P = 1 − 0.3349 = 0.6651
Answer
P = 0.6651
16.Probability
Answer: E(G) = −0.2 €
Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.
Net outcomes
G: 1 (p = 0.15), 9 (p = 0.05), −1 (p = 0.8)
Expected value
E(G) = 1·0.15 + 9·0.05 − 1·0.8 = −0.2 €
Answer
E(G) = −0.2 €
A negative value means you lose money on average.
17.Descriptive statistics
Answer: s = 11.56
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = 0.6
Standard normal table
Φ(0.6) = 0.7257
P = 0.7257
Answer
P = 0.7257
19.Normal distribution
Answer: P = 0.6131
Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.
z-scores
z₁ = (93.25 − 100)/15 = −0.45
z₂ = (123.25 − 100)/15 = 1.55
Area between
P = Φ(1.55) − Φ(−0.45) = 0.9394 − 0.3264 = 0.6131
Answer
P = 0.6131
20.Normal distribution
Answer: x = 37.05 min
Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.