Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (√(4x2 − 5x) − 2x).

f(x) = √(4x2 − 5x) − 2xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 ln(1 + x)/sin(2x), with x in radians.

f(x) = ln(1 + x)/sin(2x)x → 0
L =
3.DerivativesMedium
xyx = 2

Let f(x) = x3·e2x. Find f′(2).

f(x) = x3·e2xx = 2
f′(2) =
4.DerivativesHard
xyx = 2

The tangent line to f(x) = 3x2 − x at x = 2 crosses the y-axis at y = b. Find b.

f(x) = 3x2 − xx = 2
b =
5.IntegralsMedium
xy02

Evaluate I = ∫02 ex dx.

f(x) = ex[0, 2]
I =
6.IntegralsHard
xy0.5y = x²eˣ

Evaluate I = ∫₀0.5 x²·eˣ dx.

∫₀0.5 x²eˣ dx
I =
7.Complex numbersMedium
ReIm11−1−122−2−233−3−3z₁z₂w

Given z₁ = 1.5∠30° and z₂ = 3∠−95°, find the real part of w = z₁/z₂.

z₁ = 1.5∠30°z₂ = 3∠−95°
Re(w) =
8.Complex numbersHard
ReIm11−1−122−2−233−3−3z₀z₁

The roots of zⁿ = w with n = 2 and w = 9∠120° are zk = R1/n∠((φ + 360°·k)/n), k = 0, 1. Find the imaginary part of z₁.

w = 9∠120°n = 2k = 1
Im(z₁) =
9.Differential equationsMedium
t (min)T (°C)28Ta​T = ?

A forged steel part at 300 °C is left to cool in a workshop at 26 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.03 min⁻¹, find its temperature T after 28 min.

T0 = 300 °CTa = 26 °Ck = 0.03 min⁻¹t = 28 min
T = °C
10.Differential equationsHard
xy13(1, −1)y(3) = ?

Solve the initial value problem y′ + 3y/x = 5 for x > 0, with y(1) = −1. Find y(3).

y′ + 3y/x = 5y(1) = −1
y(3) =
11.Matrices & determinantsMedium
A =−2−312−4−4−1−4−2

Find the determinant det A of the 3×3 matrix A shown.

A = [−2 −3 1; 2 −4 −4; −1 −4 −2]
det A =
12.Matrices & determinantsHard
A =36−4−2b =−26

Solve the system 3x + 6y = −2 and −4x − 2y = 6. Find x.

3x + 6y = −2−4x − 2y = 6
x =
13.Vectors: dot & cross productMedium
xyzab

Find the scalar projection compb a of a = (−6, −4, 5) onto b = (0, −5, 5), that is, the component of a in the direction of b.

a = (−6, −4, 5)b = (0, −5, 5)
compb a =
14.Vectors: dot & cross productHard
xyzab

The unit vector n̂ is perpendicular to both a = (−5, −1, 1) and b = (3, 4, −1) and has a positive z-component. Find its x-component n̂x.

a = (−5, −1, 1)b = (3, 4, −1)n̂z > 0
n̂x =
15.ProbabilityMedium
n = 9k = 4N = ?

In how many ways N can a committee of 4 people be chosen from a group of 9? The order does not matter.

n = 9k = 4
N =
16.ProbabilityHard
n = 11, p = 0.5: P(X ≤ 1) = ?k01234567891011

11 components are tested, and each one fails with probability 0.5, independently. What is the probability P that at most one fails?

n = 11p = 0.5
P =
17.Descriptive statisticsMedium
101520253035404550

Find the sample standard deviation s of the data: 44, 10, 14, 51, 22.

n = 5
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 70 and standard deviation 5. What proportion P of values is below 64?

μ = 70σ = 5x = 64
P =
19.Normal distributionMedium
5583P = ?

The exam scores are normally distributed with mean 65 points and standard deviation 10 points. What fraction lies between 55 and 83 points? Give P as a decimal.

μ = 65σ = 10x1 = 55x2 = 83
P =
20.Normal distributionHard
157164171178185192199cmtop 95%

The heights of adult men are normally distributed with mean 178 cm and standard deviation 7 cm. Drag the cut-off so the shaded top 95% is to the right of it. Find the cut-off x.

μ = 178 cmσ = 7 cm95%
x = cm

3Solutions

1.Limits

Answer: L = −1.25

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Multiply by the conjugate

f(x) = −5x/(√(4x2 − 5x) + 2x)

Divide by x

f(x) = −5/(√(4 + (−5)/x) + 2)

Let x → ∞

L = −5/(2 + 2) = −1.25

Answer

L = −1.25
2.Limits

Answer: L = 0.5

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

L'Hôpital's rule

L = limx→0 [1/(1 + x)]/[2·cos 2x]

Substitute x = 0

L = 1/2 = 0.5

Answer

L = 0.5
3.Derivatives

Answer: f′(2) = 1529

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Product rule

f′(x) = u′v + uv′ = e2x·(3x2 + 2·x3)

Substitute

f′(2) = 54.6·(12 + 16) = 1529

Answer

f′(2) = 1529
4.Derivatives

Answer: b = −12

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(2) = 10
f′(x) = 6x − 1 → f′(2) = 11

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = 10 − 11·2 = −12

Answer

b = −12
5.Integrals

Answer: I = 6.389

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = ex/1

Evaluate at the limits

I = (e2 − 1)/1 = (7.389 − 1)/1 = 6.389

Answer

I = 6.389
6.Integrals

Answer: I = 0.0609

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

First round

∫x²eˣ dx = x²eˣ − ∫2x eˣ dx

Second round

∫2x eˣ dx = 2x eˣ − 2eˣ
∫x²eˣ dx = eˣ(x² − 2x + 2)

Limits

1.649·(1.25) − 1·2 = 0.0609

Answer

I = 0.0609
7.Complex numbers

Answer: Re(w) = −0.2868

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Modulus and argument of w

|w| = 1.5 / 3 = 0.5
θ = 30° − (−95)° = 125°

Rectangular form

Re(w) = 0.5·cos(125°) = −0.2868
Im(w) = 0.5·sin(125°) = 0.4096
Re(w) = −0.2868

Answer

Re(w) = −0.2868
8.Complex numbers

Answer: Im(z₁) = −2.598

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Modulus of the roots

91/2 = 3

Argument of the root

θ₁ = (120° + 360°·1)/2 = 240° → −120°

Rectangular form

z₁ = 3·(cos −120° + j sin −120°) = −1.5 − j2.598
Im(z₁) = −2.598

Answer

Im(z₁) = −2.598

The 2 roots lie on the circle of radius 3, 180° apart.

9.Differential equations

Answer: T = 144.3 °C

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Solution of the cooling law

T(t) = 26 + 274·e−0.03t

Substitute t

T(28) = 26 + 274·0.4317 = 144.3 °C

Answer

T = 144.3 °C
10.Differential equations

Answer: y(3) = 3.667

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e∫3/x dx = x3

Integrate

(x3y)′ = 5x3 → x3y = 5x4/4 + C

Initial condition

−1 = 5/4 + C → C = −2.25

Evaluate

y(3) = (5·34/4 + (−2.25))/33 = 3.667

Answer

y(3) = 3.667
11.Matrices & determinants

Answer: det A = −20

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = −8, M₁₂ = −8, M₁₃ = −12

Cofactor expansion

det A = (−2)·(−8) − (−3)·(−8) + 1·(−12) = −20

Answer

det A = −20
12.Matrices & determinants

Answer: x = −1.778

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = 3·(−2) − 6·(−4) = 18

Replace the x column

det Aₓ = (−2)·(−2) − 6·6 = −32
x = −32/18 = −1.778

Answer

x = −1.778
y = 0.5556
13.Vectors: dot & cross product

Answer: compb a = 6.364

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Dot product

a·b = (−6)·0 + (−4)·(−5) + 5·5 = 45

Length of b

|b| = √(0² + (−5)² + 5²) = 7.071

Scalar projection

compb a = a·b/|b| = 45/7.071 = 6.364

Answer

compb a = 6.364
14.Vectors: dot & cross product

Answer: n̂x = 0.1726

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product

(a × b)x = aybz − azby = (−1)·(−1) − 1·4 = −3
(a × b)y = azbx − axbz = 1·3 − (−5)·(−1) = −2
(a × b)z = axby − aybx = (−5)·4 − (−1)·3 = −17

Normalise

The z-component of a × b is negative, so use −(a × b).

|a × b| = √((−3)² + (−2)² + (−17)²) = 17.38
n̂ = −(−3, −2, −17)/17.38 = (0.1726, 0.1151, 0.9782)
n̂x = 0.1726

Answer

n̂x = 0.1726
15.Probability

Answer: N = 126

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Combinations

C(9, 4) = (9·8·7·6)/(4·3·2·1) = 126

Answer

N = 126
16.Probability

Answer: P = 0.005859

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Zero and one failure

P(X = 0) = 0.511 = 0.0004883
P(X = 1) = 11·0.5·0.510 = 0.005371

Add them

P = 0.0004883 + 0.005371 = 0.005859

Answer

P = 0.005859
17.Descriptive statistics

Answer: s = 18.31

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 141/5 = 28.2

Squared deviations

Σ(x − x̄)² = 15.8² + (−18.2)² + (−14.2)² + 22.8² + (−6.2)² = 1341

Standard deviation

s = √(1341/4) = 18.31

Answer

s = 18.31
18.Descriptive statistics

Answer: P = 0.1151

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −1.2

Standard normal table

Φ(−1.2) = 0.1151
P = 0.1151

Answer

P = 0.1151
19.Normal distribution

Answer: P = 0.8054

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z-scores

z₁ = (55 − 65)/10 = −1
z₂ = (83 − 65)/10 = 1.8

Area between

P = Φ(1.8) − Φ(−1) = 0.9641 − 0.1587 = 0.8054

Answer

P = 0.8054
20.Normal distribution

Answer: x = 166.5 cm

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left

Φ(z) = 0.05

z from the table

z ≈ −1.64

Back to the original units

x = 178 − 1.64·7 = 166.5 cm

Answer

x = 166.5 cm

ExamProblems · examproblems.com/courses/engineering-mathematics