Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (1 + 0.5/x)2x. Give a decimal value.

f(x) = (1 + 0.5/x)2xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (1 − cos 2x)/(2x²), with x in radians.

f(x) = (1 − cos 2x)/(2x²)x → 0
L =
3.DerivativesMedium
xyx = 1

Let f(x) = (4x − 1)3. Find f′(1).

f(x) = (4x − 1)3x = 1
f′(1) =
4.DerivativesHard
xyx = −2

The tangent line to f(x) = 0.5x2 − 5x − 1 at x = −2 crosses the y-axis at y = b. Find b.

f(x) = 0.5x2 − 5x − 1x = −2
b =
5.IntegralsMedium
xy13y = x ln x

Evaluate I = ∫₁3 x·ln x dx.

∫₁3 x ln x dx
I =
6.IntegralsHard
xyy = 0.5x2​y = x

Find the area A of the region enclosed by y = 0.5x2 and y = x.

y = 0.5x2y = x
A =
7.Complex numbersMedium
ReIm55−5−51010−10−10θz

Write z = −5 − j9 in exponential form r·ejθ. Give θ in radians, between −π and π.

z = −5 − j9
θ = rad
8.Complex numbersHard
ReIm11−1−122−2−2z₀z₁

The roots of zⁿ = w with n = 2 and w = 4∠120° are zk = R1/n∠((φ + 360°·k)/n), k = 0, 1. Find the real part of z₁.

w = 4∠120°n = 2k = 1
Re(z₁) =
9.Differential equationsMedium
t (min)T (°C)26Ta​26 °C

A can of soda at 4 °C is taken out of the fridge into a room at 29 °C. After 26 min its temperature is 26 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). Find the constant k in min⁻¹.

T0 = 4 °CTa = 29 °CT(26) = 26 °C
k = min⁻¹
10.Differential equationsHard
xy13(1, −1)y(3) = ?

Solve the initial value problem y′ + y/x = 2 for x > 0, with y(1) = −1. Find y(3).

y′ + y/x = 2y(1) = −1
y(3) =
11.Matrices & determinantsMedium
A =−41−3−3−41254

Find the determinant det A of the 3×3 matrix A shown.

A = [−4 1 −3; −3 −4 1; 2 5 4]
det A =
12.Matrices & determinantsHard
A =13−5−7

Find the larger eigenvalue λ of the matrix A shown.

A = [1 3; −5 −7]
λ =
13.Vectors: dot & cross productMedium
xyzab

Find the value of k for which the vectors a = (−1, 6, 4) and b = (2, k, 0) are perpendicular.

a = (−1, 6, 4)b = (2, k, 0)
k =
14.Vectors: dot & cross productHard
xyzab

The unit vector n̂ is perpendicular to both a = (2, −1, −1) and b = (−5, 0, −1) and has a positive z-component. Find its y-component n̂y.

a = (2, −1, −1)b = (−5, 0, −1)n̂z > 0
n̂y =
15.ProbabilityMedium
n = 13k = 5N = ?

In how many ways N can a committee of 5 people be chosen from a group of 13? The order does not matter.

n = 13k = 5
N =
16.ProbabilityHard
xp(x)100.15200.25300.35400.25μ

X has the distribution shown, and Y = 0.5X + 4. Find the standard deviation σY of Y.

x: 10, 20, 30, 40p(x): 0.15, 0.25, 0.35, 0.25Y = 0.5X + 4
σY =
17.Descriptive statisticsMedium
152025303540455055

Find the sample standard deviation s of the data: 49, 50, 23, 38, 56, 15.

n = 6
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 60 and standard deviation 10. What proportion P of values is below 75?

μ = 60σ = 10x = 75
P =
19.Normal distributionMedium
167.5186.75P = ?

The heights of adult men are normally distributed with mean 178 cm and standard deviation 7 cm. What fraction lies between 167.5 and 186.75 cm? Give P as a decimal.

μ = 178σ = 7x1 = 167.5x2 = 186.75
P =
20.Normal distributionHard
μ = 500x = ?95%

The battery lifetimes are normally distributed with mean 500 h and standard deviation 40 h. Find the value x below which 95% of them lie (the 95th percentile).

μ = 500σ = 40P = 95%
x = h

3Solutions

1.Limits

Answer: L = 2.718

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Take the logarithm

ln L = limx→∞ 2·x·ln(1 + 0.5/x)

Evaluate

ln(1 + u)/u → 1 as u → 0, so x·ln(1 + a/x) → a.

ln L = 2·0.5 = 1

Undo the logarithm

L = e1 = 2.718

Answer

L = 2.718
2.Limits

Answer: L = 1

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

2·sin 2x/(4x) → 0/0

Second application

4·cos 2x/4

Substitute x = 0

L = 4/4 = 1

Answer

L = 1
3.Derivatives

Answer: f′(1) = 108

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule

f′(x) = 3·(4x − 1)2·4

Substitute

f′(1) = 3·32·4 = 108

Answer

f′(1) = 108
4.Derivatives

Answer: b = −3

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(−2) = 11
f′(x) = x − 5 → f′(−2) = −7

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = 11 − (−7)·(−2) = −3

Answer

b = −3
5.Integrals

Answer: I = 2.944

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = ln x, du = dx/x; dv = x dx, v = x²/2

Antiderivative

∫x ln x dx = (x²/2)ln x − ∫(x/2) dx = (x²/2)ln x − x²/4

Limits

(4.5·ln 3 − 2.25) − (0 − 0.25) = 2.944

Answer

I = 2.944
6.Integrals

Answer: A = 0.6667

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

0.5x2 = x → x = 0, x = 2

Integrate upper minus lower

A = [0.5x2 − 0.1667x3]02 = 0.6667

Answer

A = 0.6667
7.Complex numbers

Answer: θ = −2.078 rad

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Modulus

r = √(25 + 81) = 10.3

Argument in radians

θ = −119.1° = −119.1·π/180 = −2.078 rad

Exponential form

z = 10.3·e−j2.078

Answer

θ = −2.078 rad
8.Complex numbers

Answer: Re(z₁) = −1

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Modulus of the roots

41/2 = 2

Argument of the root

θ₁ = (120° + 360°·1)/2 = 240° → −120°

Rectangular form

z₁ = 2·(cos −120° + j sin −120°) = −1 − j1.732
Re(z₁) = −1

Answer

Re(z₁) = −1

The 2 roots lie on the circle of radius 2, 180° apart.

9.Differential equations

Answer: k = 0.08155 min⁻¹

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Ratio of temperature differences

e−26k = -3/-25

Solve for k

k = ln(-25/-3)/26 = 0.08155 min⁻¹

Answer

k = 0.08155 min⁻¹
10.Differential equations

Answer: y(3) = 2.333

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e∫1/x dx = x1

Integrate

(x1y)′ = 2x → x1y = 2x2/2 + C

Initial condition

−1 = 2/2 + C → C = −2

Evaluate

y(3) = (2·32/2 + (−2))/31 = 2.333

Answer

y(3) = 2.333
11.Matrices & determinants

Answer: det A = 119

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = −21, M₁₂ = −14, M₁₃ = −7

Cofactor expansion

det A = (−4)·(−21) − 1·(−14) + (−3)·(−7) = 119

Answer

det A = 119
12.Matrices & determinants

Answer: λ = −2

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Characteristic equation

λ² − (−6)λ + (8) = 0

Solve

λ = (−6 ± √(4))/2 → λ = −4, −2
λ = −2

Answer

λ = −2
13.Vectors: dot & cross product

Answer: k = 0.3333

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Dot product equals zero

a·b = (−1)·2 + 6·k + 4·0 = 0
−2 + 6·k = 0

Solve for k

k = −(−2)/6 = 0.3333

Answer

k = 0.3333
14.Vectors: dot & cross product

Answer: n̂y = −0.8083

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product

(a × b)x = aybz − azby = (−1)·(−1) − (−1)·0 = 1
(a × b)y = azbx − axbz = (−1)·(−5) − 2·(−1) = 7
(a × b)z = axby − aybx = 2·0 − (−1)·(−5) = −5

Normalise

The z-component of a × b is negative, so use −(a × b).

|a × b| = √(1² + 7² + (−5)²) = 8.66
n̂ = −(1, 7, −5)/8.66 = (−0.1155, −0.8083, 0.5774)
n̂y = −0.8083

Answer

n̂y = −0.8083
15.Probability

Answer: N = 1287

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Combinations

C(13, 5) = (13·12·11·10·9)/(5·4·3·2·1) = 1287

Answer

N = 1287
16.Probability

Answer: σY = 5.025

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Spread of X

μ = 27, Var(X) = 101, σX = 10.05

Linear change

σY = |0.5|·10.05 = 5.025

Answer

σY = 5.025

The mean does move: E(Y) = 0.5·27 + 4 = 17.5.

17.Descriptive statistics

Answer: s = 16.38

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 231/6 = 38.5

Squared deviations

Σ(x − x̄)² = 10.5² + 11.5² + (−15.5)² + (−0.5)² + 17.5² + (−23.5)² = 1342

Standard deviation

s = √(1342/5) = 16.38

Answer

s = 16.38
18.Descriptive statistics

Answer: P = 0.9332

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = 1.5

Standard normal table

Φ(1.5) = 0.9332
P = 0.9332

Answer

P = 0.9332
19.Normal distribution

Answer: P = 0.8275

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z-scores

z₁ = (167.5 − 178)/7 = −1.5
z₂ = (186.75 − 178)/7 = 1.25

Area between

P = Φ(1.25) − Φ(−1.5) = 0.8944 − 0.06681 = 0.8275

Answer

P = 0.8275
20.Normal distribution

Answer: x = 565.8 h

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z for the percentile

Φ(z) = 0.95 → z = 1.645

Back to x

x = 500 + 1.645·40 = 565.8 h

Answer

x = 565.8 h

ExamProblems · examproblems.com/courses/engineering-mathematics