Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).
Differential equations
Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m
Matrices & determinants
2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)
Vectors: dot & cross product
Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|
Method
Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.
Probability
Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Normal distribution
z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ
Method
Convert the value to a z-score: z = (x − μ)/σ.
Look up Φ(z), the area to the left of z.
For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
For a percentile, work backwards: find z for the area, then x = μ + z·σ.
2Practice problems
1.LimitsMedium
Find the limit L = limx→∞ (√(x2 + 7x) − x).
f(x) = √(x2 + 7x) − xx → ∞
L =
2.LimitsHard
Find the limit L = limx→0 (e1.5x − 1 − 1.5x)/x².
f(x) = (e1.5x − 1 − 1.5x)/x²x → 0
L =
3.DerivativesMedium
Let f(x) = (4x + 5)3. Find f′(0).
f(x) = (4x + 5)3x = 0
f′(0) =
4.DerivativesHard
The tangent line to f(x) = 3x2 − 2x + 3 at x = 2 crosses the y-axis at y = b. Find b.
f(x) = 3x2 − 2x + 3x = 2
b =
5.IntegralsMedium
Evaluate I = ∫02 2x·(x² + 1)1 dx.
f(x) = 2x·(x² + 1)1[0, 2]
I =
6.IntegralsHard
Find the area A of the region between the parabola y = 1 − x² and the x-axis.
y = 1 − x²
A =
7.Complex numbersMedium
Write z = 5∠125° in rectangular form a + jb and give the imaginary part b.
r = 5θ = 125°
b =
8.Complex numbersHard
Find the real part of (−3 + j2)³.
z = −3 + j2n = 3
Re(z³) =
9.Differential equationsMedium
A can of soda at 5 °C is taken out of the fridge into a room at 30 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.06 min⁻¹, find its temperature T after 26 min.
T0 = 5 °CTa = 30 °Ck = 0.06 min⁻¹t = 26 min
T = °C
10.Differential equationsHard
Solve the initial value problem y′ + 2y/x = 4x2 for x > 0, with y(1) = 3. Find y(3).
y′ + 2y/x = 4x2y(1) = 3
y(3) =
11.Matrices & determinantsMedium
Let C = AB for the matrices shown. Find the entry c12 (row 1, column 2).
A = [−5 6; 3 3]B = [−1 −5; −5 −4]
c12 =
12.Matrices & determinantsHard
Find the larger eigenvalue λ of the matrix A shown.
A = [5 3; −5 −3]
λ =
13.Vectors: dot & cross productMedium
Find the scalar projection compb a of a = (−7, 3, 5) onto b = (−5, 6, −2), that is, the component of a in the direction of b.
a = (−7, 3, 5)b = (−5, 6, −2)
compb a =
14.Vectors: dot & cross productHard
Find the volume V of the parallelepiped whose edges from one corner are a = (4, 3, −2), b = (−4, −4, −2) and c = (5, −2, −2).
a = (4, 3, −2)b = (−4, −4, −2)c = (5, −2, −2)
V =
15.ProbabilityMedium
For the distribution shown, find the standard deviation σ of X.
x: 0, 2, 4, 6p(x): 0.15, 0.35, 0.25, 0.25
σ =
16.ProbabilityHard
X has the distribution shown, and Y = 10X + 10. Find the standard deviation σY of Y.
x: 0, 1, 2p(x): 0.35, 0.35, 0.3Y = 10X + 10
σY =
17.Descriptive statisticsMedium
Find the sample standard deviation s of the data: 33, 19, 36, 31, 29, 10, 60.
n = 7
s =
18.Descriptive statisticsHard
Exam scores are normally distributed with mean 60 and standard deviation 12. Find the z-score z of a score of 67.2.
μ = 60σ = 12x = 67.2
z =
19.Normal distributionMedium
Drag z so that the shaded area under the standard normal curve, to the right of z, is 0.1446. Find z to two decimals.
A = 0.1446
z =
20.Normal distributionHard
Hole diameters D are normal with mean 25.02 mm and standard deviation 0.01 mm. Shaft diameters d are independent and normal with mean 25 mm and standard deviation 0.02 mm. A randomly chosen shaft fits when D − d > 0. Find the probability P that it fits. Round z to two decimals.
hole: μ = 25.02 mm, σ = 0.01 mmshaft: μ = 25 mm, σ = 0.02 mm
P =
3Solutions
1.Limits
Answer: L = 3.5
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
Multiply by the conjugate
f(x) = 7x/(√(x2 + 7x) + x)
Divide by x
f(x) = 7/(√(1 + 7/x) + 1)
Let x → ∞
L = 7/(1 + 1) = 3.5
Answer
L = 3.5
2.Limits
Answer: L = 1.125
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
First application
(1.5·e1.5x − 1.5)/(2x) → 0/0
Second application
2.25·e1.5x/2
Substitute x = 0
L = 2.25·1/2 = 1.125
Answer
L = 1.125
3.Derivatives
Answer: f′(0) = 300
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Chain rule
f′(x) = 3·(4x + 5)2·4
Substitute
f′(0) = 3·52·4 = 300
Answer
f′(0) = 300
4.Derivatives
Answer: b = −9
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Point and slope
f(2) = 11
f′(x) = 6x − 2 → f′(2) = 10
Tangent line at x = 0
b = f(x₀) − f′(x₀)·x₀ = 11 − 10·2 = −9
Answer
b = −9
5.Integrals
Answer: I = 12
Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.
Substitution
u = x² + 1, du = 2x dx
I = ∫15 u1 du
Integrate and evaluate
I = [u2/2]15 = (25 − 1)/2 = 12
Answer
I = 12
6.Integrals
Answer: A = 1.333
Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.
Zeros
1 − x² = 0 → x = ±1
Integrate
A = [1x − x³/3]−11 = 0.6667 − (−0.6667) = 1.333
Answer
A = 1.333
7.Complex numbers
Answer: b = 4.096
Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.
Components
a = 5·cos(125°) = −2.868
b = 5·sin(125°) = 4.096
Rectangular form
z = −2.868 + j4.096
b = 4.096
Answer
b = 4.096
8.Complex numbers
Answer: Re(z³) = 9
De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.
Powers step by step
z² = (−3 + j2)(−3 + j2) = 5 − j12
z³ = (5 − j12)(−3 + j2) = 9 + j46
Check with De Moivre
z = 3.606∠146.3° → z³ = 46.87∠78.93°
Re(z³) = 9
Answer
Re(z³) = 9
9.Differential equations
Answer: T = 24.75 °C
First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.
Solution of the cooling law
T(t) = 30 + (−25)·e−0.06t
Substitute t
T(26) = 30 + (−25)·0.2101 = 24.75 °C
Answer
T = 24.75 °C
10.Differential equations
Answer: y(3) = 21.84
First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.
Integrating factor
μ = e∫2/x dx = x2
Integrate
(x2y)′ = 4x4 → x2y = 4x5/5 + C
Initial condition
3 = 4/5 + C → C = 2.2
Evaluate
y(3) = (4·35/5 + 2.2)/32 = 21.84
Answer
y(3) = 21.84
11.Matrices & determinants
Answer: c12 = 1
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Row times column
c12 = (−5)·(−5) + 6·(−4) = 1
Answer
c12 = 1
12.Matrices & determinants
Answer: λ = 2
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Characteristic equation
λ² − (2)λ + (0) = 0
Solve
λ = (2 ± √(4))/2 → λ = 0, 2
λ = 2
Answer
λ = 2
13.Vectors: dot & cross product
Answer: compb a = 5.333
Dot product:a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.
Dot product
a·b = (−7)·(−5) + 3·6 + 5·(−2) = 43
Length of b
|b| = √((−5)² + 6² + (−2)²) = 8.062
Scalar projection
compb a = a·b/|b| = 43/8.062 = 5.333
Answer
compb a = 5.333
14.Vectors: dot & cross product
Answer: V = 94
Cross product:a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.
Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.
Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.
Spread of X
μ = 0.95, Var(X) = 0.6475, σX = 0.8047
Linear change
σY = |10|·0.8047 = 8.047
Answer
σY = 8.047
The mean does move: E(Y) = 10·0.95 + 10 = 19.5.
17.Descriptive statistics
Answer: s = 15.59
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = (67.2 − 60)/12 = 0.6
Answer
z = 0.6
19.Normal distribution
Answer: z = 1.06
From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.
Area to the left of z
Φ(z) = 1 − 0.1446 = 0.8554
Read the z-table backwards
Find 0.8554 inside the table and read off z.
z = 1.06
Answer
z = 1.06
20.Normal distribution
Answer: P = 0.8133
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).