Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (√(x2 − 3x) − x).

f(x) = √(x2 − 3x) − xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (1 − cos 5x)/(3x²), with x in radians.

f(x) = (1 − cos 5x)/(3x²)x → 0
L =
3.DerivativesMedium
xyx = 2

Let f(x) = (4x − 1)4. Find f′(2).

f(x) = (4x − 1)4x = 2
f′(2) =
4.DerivativesHard
xy

Let f(x) = x3 + 7.5x2 + 18x + 6. Find the x-coordinate x of the local maximum.

f(x) = x3 + 7.5x2 + 18x + 6
x =
5.IntegralsMedium
xy11.5y = x ln x

Evaluate I = ∫₁1.5 x·ln x dx.

∫₁1.5 x ln x dx
I =
6.IntegralsHard
xyy = x2​y = x

Find the area A of the region enclosed by y = x2 and y = x.

y = x2y = x
A =
7.Complex numbersMedium
ReIm22−2−244−4−4z₁z₂w

Given z₁ = 1.5∠−35° and z₂ = 4∠80°, find the imaginary part of w = z₁·z₂.

z₁ = 1.5∠−35°z₂ = 4∠80°
Im(w) =
8.Complex numbersHard
ReIm11−1−122−2−233−3−3z₀z₁

The roots of zⁿ = w with n = 2 and w = 9∠135° are zk = R1/n∠((φ + 360°·k)/n), k = 0, 1. Find the real part of z₁.

w = 9∠135°n = 2k = 1
Re(z₁) =
9.Differential equationsMedium
tyy(0) = 1y(0.5) = ?

Solve y″ + 2y′ + y = 0 with y(0) = 1 and y′(0) = 1. Find y(0.5).

y″ + 2y′ + y = 0y(0) = 1y′(0) = 1
y(0.5) =
10.Differential equationsHard
tyK = 5y(0.25) = ?

A system obeys y″ + 3y′ + 11.25y = 56.25 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find y(0.25); angles in radians.

y″ + 3y′ + 11.25y = 56.25y(0) = 0y′(0) = 0
y(0.25) =
11.Matrices & determinantsMedium
A =−45154−5−4−5−5

Find the determinant det A of the 3×3 matrix A shown.

A = [−4 5 1; 5 4 −5; −4 −5 −5]
det A =
12.Matrices & determinantsHard
A =0382

Find the larger eigenvalue λ of the matrix A shown.

A = [0 3; 8 2]
λ =
13.Vectors: dot & cross productMedium
xyzdFAB

A constant force F = (5, −15, −30) N acts on an object while it moves in a straight line from point A(2, −2, 0) to point B(0, 4, 3). Coordinates are in metres. Find the work W done by the force.

F = (5, −15, −30) NA(2, −2, 0) mB(0, 4, 3) m
W = J
14.Vectors: dot & cross productHard
xyzrFOA

A force F = (10, −40, 60) N acts at point A(−4, −4, −1). Coordinates are in metres. Find the z-component Mz of the moment of the force about point O(−3, 0, −2).

F = (10, −40, 60) NA(−4, −4, −1) mO(−3, 0, −2) m
Mz = N·m
15.ProbabilityMedium
xp(x)10.1520.3530.140.0550.35μ = 3.1

For the distribution shown, find the variance Var(X) of X.

x: 1, 2, 3, 4, 5p(x): 0.15, 0.35, 0.1, 0.05, 0.35
Var(X) =
16.ProbabilityHard
€p(x)−10.7840.2490.02

A game costs €1 to play. You win €5 with probability 0.2 and €50 with probability 0.02; otherwise you win nothing. The stake is not returned. Find the expected net gain E(G) per game.

stake = €1€5: p = 0.2€50: p = 0.02
E(G) = €
17.Descriptive statisticsMedium
152025303540

Find the sample standard deviation s of the data: 11, 22, 24, 40, 15.

n = 5
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 60 and standard deviation 15. What proportion P of values is below 90?

μ = 60σ = 15x = 90
P =
19.Normal distributionMedium
27.539.2P = ?

The delivery times are normally distributed with mean 32 min and standard deviation 6 min. What fraction lies between 27.5 and 39.2 min? Give P as a decimal.

μ = 32σ = 6x1 = 27.5x2 = 39.2
P =
20.Normal distributionHard
0.03 mm0D − d?

Hole diameters D are normal with mean 25.03 mm and standard deviation 0.015 mm. Shaft diameters d are independent and normal with mean 25 mm and standard deviation 0.015 mm. A randomly chosen shaft fits when D − d > 0. Find the probability P that it fits. Round z to two decimals.

hole: μ = 25.03 mm, σ = 0.015 mmshaft: μ = 25 mm, σ = 0.015 mm
P =

3Solutions

1.Limits

Answer: L = −1.5

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Multiply by the conjugate

f(x) = −3x/(√(x2 − 3x) + x)

Divide by x

f(x) = −3/(√(1 + (−3)/x) + 1)

Let x → ∞

L = −3/(1 + 1) = −1.5

Answer

L = −1.5
2.Limits

Answer: L = 4.167

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

5·sin 5x/(6x) → 0/0

Second application

25·cos 5x/6

Substitute x = 0

L = 25/6 = 4.167

Answer

L = 4.167
3.Derivatives

Answer: f′(2) = 5488

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule

f′(x) = 4·(4x − 1)3·4

Substitute

f′(2) = 4·73·4 = 5488

Answer

f′(2) = 5488
4.Derivatives

Answer: x = −3

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Derivative

f′(x) = 3x2 + 15x + 18 = 3·(x2 + 5x + 6)

Solve f′(x) = 0

x = −3 or x = −2

Which one is which

f″(x) = 6x + 15: negative at a maximum, positive at a minimum.

f″(−3) = −3, f″(−2) = 3
x = −3

Answer

x = −3
5.Integrals

Answer: I = 0.1436

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = ln x, du = dx/x; dv = x dx, v = x²/2

Antiderivative

∫x ln x dx = (x²/2)ln x − ∫(x/2) dx = (x²/2)ln x − x²/4

Limits

(1.125·ln 1.5 − 0.5625) − (0 − 0.25) = 0.1436

Answer

I = 0.1436
6.Integrals

Answer: A = 0.1667

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

x2 = x → x = 0, x = 1

Integrate upper minus lower

A = [0.5x2 − 0.3333x3]01 = 0.1667

Answer

A = 0.1667
7.Complex numbers

Answer: Im(w) = 4.243

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Modulus and argument of w

|w| = 1.5 · 4 = 6
θ = −35° + 80° = 45°

Rectangular form

Re(w) = 6·cos(45°) = 4.243
Im(w) = 6·sin(45°) = 4.243
Im(w) = 4.243

Answer

Im(w) = 4.243
8.Complex numbers

Answer: Re(z₁) = −1.148

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Modulus of the roots

91/2 = 3

Argument of the root

θ₁ = (135° + 360°·1)/2 = 247.5° → −112.5°

Rectangular form

z₁ = 3·(cos −112.5° + j sin −112.5°) = −1.148 − j2.772
Re(z₁) = −1.148

Answer

Re(z₁) = −1.148

The 2 roots lie on the circle of radius 3, 180° apart.

9.Differential equations

Answer: y(0.5) = 1.213

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Double root

(r + 1)² = 0 → r = −1

Constants

A = y(0) = 1
y′(0) = B − 1A → B = 1 + 1 = 2

Evaluate

y(0.5) = (1 + 2·0.5)·e−0.5 = 1.213

Answer

y(0.5) = 1.213
10.Differential equations

Answer: y(0.25) = 1.314

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Steady value and roots

yss = 5, r = −1.5 ± 3j

Constants from the initial values

y(0) = 5 + A = 0 → A = −5
y′(0) = −1.5A + 3B = 0 → B = −2.5

Evaluate

y(0.25) = 5·(1 − e−0.375(cos 0.75 + 0.5·sin 0.75)) = 1.314

Answer

y(0.25) = 1.314
11.Matrices & determinants

Answer: det A = 396

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = −45, M₁₂ = −45, M₁₃ = −9

Cofactor expansion

det A = (−4)·(−45) − 5·(−45) + 1·(−9) = 396

Answer

det A = 396
12.Matrices & determinants

Answer: λ = 6

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Characteristic equation

λ² − (2)λ + (−24) = 0

Solve

λ = (2 ± √(100))/2 → λ = −4, 6
λ = 6

Answer

λ = 6
13.Vectors: dot & cross product

Answer: W = −190 J

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Displacement

d = B − A = (0, 4, 3) − (2, −2, 0) = (−2, 6, 3) m

Work

W = F·d = 5·(−2) + (−15)·6 + (−30)·3 = −190 J

Answer

W = −190 J

Negative work: the force acts mostly against the motion.

14.Vectors: dot & cross product

Answer: Mz = 80 N·m

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Position vector from O to A

r = A − O = (−4, −4, −1) − (−3, 0, −2) = (−1, −4, 1) m

Moment M = r × F

(r × F)x = ryFz − rzFy = (−4)·60 − 1·(−40) = −200 N·m
(r × F)y = rzFx − rxFz = 1·10 − (−1)·60 = 70 N·m
(r × F)z = rxFy − ryFx = (−1)·(−40) − (−4)·10 = 80 N·m

Requested component

Mz = 80 N·m

Answer

Mz = 80 N·m
15.Probability

Answer: Var(X) = 2.39

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Mean

μ = 1·0.15 + 2·0.35 + 3·0.1 + 4·0.05 + 5·0.35 = 3.1

Mean of the squares

E(X²) = 1·0.15 + 4·0.35 + 9·0.1 + 16·0.05 + 25·0.35 = 12

Variance

Var(X) = 12 − 3.1² = 2.39

Answer

Var(X) = 2.39
16.Probability

Answer: E(G) = 1 €

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Net outcomes

G: 4 (p = 0.2), 49 (p = 0.02), −1 (p = 0.78)

Expected value

E(G) = 4·0.2 + 49·0.02 − 1·0.78 = 1 €

Answer

E(G) = 1 €

A positive value means you win money on average.

17.Descriptive statistics

Answer: s = 11.15

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 112/5 = 22.4

Squared deviations

Σ(x − x̄)² = (−11.4)² + (−0.4)² + 1.6² + 17.6² + (−7.4)² = 497.2

Standard deviation

s = √(497.2/4) = 11.15

Answer

s = 11.15
18.Descriptive statistics

Answer: P = 0.9772

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = 2

Standard normal table

Φ(2) = 0.9772
P = 0.9772

Answer

P = 0.9772
19.Normal distribution

Answer: P = 0.6583

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z-scores

z₁ = (27.5 − 32)/6 = −0.75
z₂ = (39.2 − 32)/6 = 1.2

Area between

P = Φ(1.2) − Φ(−0.75) = 0.8849 − 0.2266 = 0.6583

Answer

P = 0.6583
20.Normal distribution

Answer: P = 0.9207

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the difference

μ = 25.03 − 25 = 0.03 mm, σ = 0.02121 mm

Standardise

z = (0 − 0.03)/0.02121 = −1.41

Probability

P = 1 − Φ(−1.41) = 0.9207

Answer

P = 0.9207

ExamProblems · examproblems.com/courses/engineering-mathematics