Evidence-Based Practice: cram pack

Formula sheets, the key method steps for every topic and 8 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Evidence-based practice statistics

Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time

Method

  1. Draw the 2 × 2 table and label a, b, c and d before you calculate.
  2. Read sensitivity and specificity down the columns, predictive values along the rows.
  3. For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
  4. For a likelihood ratio, convert the probability to odds, multiply, and convert back.
  5. For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Confidence intervals

σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up

Method

  1. Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
  2. Find the critical value for the confidence level.
  3. Margin of error: E = critical value × standard deviation/√n.
  4. Interval: x̄ ± E.

Hypothesis tests & confidence intervals

z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n

Method

  1. State H₀ and H₁ and decide whether the test is one- or two-sided.
  2. Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
  3. Compare with the critical value, or find the p-value.
  4. Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.

2Practice problems

1.Evidence-based practice statisticsMedium
eventno eventtotaltreatment319521840abcontrol171729900cd

Practice exercise (made-up values, not clinical guidance). In a randomised trial, 840 patients received a new treatment and 900 received the control treatment. The table shows how many in each group had a side effect. Find the number needed to harm NNH: how many patients must be treated for one extra patient to have the side effect? Round up to a whole number of patients.

treatment: 319/840control: 171/900
NNH =
2.Evidence-based practice statisticsHard
control23%treatment?

Practice exercise (made-up values, not clinical guidance). Without a drug, 23% of patients have a certain side effect during a year. The drug raises this risk with a relative risk of RR = 2.38. Find the number needed to harm NNH: how many patients must take the drug for a year for one extra patient to have the side effect? Round up to a whole number of patients.

control 23%RR = 2.38
NNH =
3.Descriptive statisticsMedium
2025303540455055

Find the sample standard deviation s of the data: 32, 37, 20, 17, 49, 55.

n = 6
s =
4.Descriptive statisticsHard
z −2−1012

Exam scores are normally distributed with mean 50 and standard deviation 8. Find the z-score z of a score of 43.6.

μ = 50σ = 8x = 43.6
z =
5.Confidence intervalsMedium
n = 10, sd​ = 5.40L = ?Ud̄ = 0.6E95%

The blood pressure of 10 patients is measured before and after a treatment. The differences d = before − after (mmHg) have mean 0.6 and standard deviation 5.4. Find the lower limit of the 95% confidence interval for the mean difference.

n = 10d̄ = 0.6sd = 5.495%t(9) = 2.262
lower limit = mmHg
6.Confidence intervalsHard
p = 0.5, n = ?p̂ − Ep̂ + Ep̂E = 0.0295%

Nothing is known in advance about the proportion of defective products. How many products n must be inspected so that a 95% confidence interval for the proportion has a margin of error of at most 0.02?

p = 0.5E = 0.0295%
n =
7.Hypothesis tests & confidence intervalsMedium
t −1.9901.99

A sample of 81 students has a mean score of 499 and a sample standard deviation of 5. Find the test statistic t for H₀: μ = 500.

μ₀ = 500x̄ = 499s = 5n = 81
t =
8.Hypothesis tests & confidence intervalsHard
z −1.9601.96

A sample of 16 measurements has mean 99.1. The population standard deviation is 12. Find the lower limit L of the 95% confidence interval for the mean.

x̄ = 99.1σ = 12n = 1695%
L =

3Solutions

1.Evidence-based practice statistics

Answer: NNH = 6

Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.

Event rates

EER = 319/840 = 0.3798
CER = 171/900 = 0.19

Number needed to harm

ARI = 0.3798 − 0.19 = 0.1898
NNH = 1/0.1898 = 5.27 → 6

Answer

NNH = 6

About one in every 6 treated patients has the side effect because of the treatment.

2.Evidence-based practice statistics

Answer: NNH = 4

Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.

Risk with the drug

0.23·2.38 = 0.5474

Absolute risk increase

ARI = 0.5474 − 0.23 = 0.3174

Number needed to harm

NNH = 1/0.3174 = 3.151 → 4

Answer

NNH = 4
3.Descriptive statistics

Answer: s = 15.22

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 210/6 = 35

Squared deviations

Σ(x − x̄)² = (−3)² + 2² + (−15)² + (−18)² + 14² + 20² = 1158

Standard deviation

s = √(1158/5) = 15.22

Answer

s = 15.22
4.Descriptive statistics

Answer: z = −0.8

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = (43.6 − 50)/8 = −0.8

Answer

z = −0.8
5.Confidence intervals

Answer: lower limit = −3.263 mmHg

Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.

Critical value

df = 9, t = 2.262

Margin of error

E = 2.262·5.4/√10 = 3.863

Interval

0.6 ± 3.863 → [−3.263, 4.463]

Answer

lower limit = −3.263 mmHg
6.Confidence intervals

Answer: n = 2401

Confidence interval for a proportion: p̂ ± z·√(p̂(1 − p̂)/n), where p̂ = x/n. To reach a margin E you need n ≥ z²·p(1 − p)/E², rounded up; without a prior estimate use p = 0.5, which gives the largest n.

Solve for n

n = 1.96²·0.5·0.5/0.02² = 2401

Round up

n = 2401

Answer

n = 2401
7.Hypothesis tests & confidence intervals

Answer: t = −1.8

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Standard error

SE = 5/√81 = 5/9 = 0.5556

Test statistic

t = (499 − 500)/0.5556 = −1.8

Answer

t = −1.8
t0.025; df = 80 = 1.99

|t| < 1.99, so H₀ is not rejected at the 5% level (two-sided).

8.Hypothesis tests & confidence intervals

Answer: L = 93.22

Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).

Margin of error

E = 1.96·12/√16 = 5.88

Interval limit

L = 99.1 − 5.88 = 93.22

Answer

L = 93.22

ExamProblems · examproblems.com/courses/evidence-based-practice