In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Evidence-based practice statistics
Sensitivity and specificity
Se = a/(a + c), Sp = d/(b + d)
Predictive values
PPV = a/(a + b), NPV = d/(c + d)
Accuracy
(a + d)/n
Likelihood ratios
LR+ = Se/(1 − Sp), LR− = (1 − Se)/Sp
PPV at prevalence p
Se·p / (Se·p + (1 − Sp)(1 − p))
Odds
odds = p/(1 − p); p = odds/(1 + odds); post-test odds = pre-test odds × LR
Risk measures
RR = EER/CER, ARR = CER − EER, RRR = ARR/CER
Number needed to treat
NNT = 1/ARR, rounded up; NNH = 1/(EER − CER)
Odds ratio
OR = ad/(bc)
Incidence rate
new cases / person-time
Method
Draw the 2 × 2 table and label a, b, c and d before you calculate.
Read sensitivity and specificity down the columns, predictive values along the rows.
For another prevalence, imagine 10 000 people and fill the table with Se, Sp and the prevalence.
For a likelihood ratio, convert the probability to odds, multiply, and convert back.
For a trial, find EER and CER first; then RR = EER/CER, ARR = CER − EER and NNT = 1/ARR rounded up.
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Confidence intervals
σ known
x̄ ± z·σ/√n
σ unknown
x̄ ± t·s/√n, df = n − 1
Critical z
90%: 1.645, 95%: 1.96, 99%: 2.576
Sample size
n = (z·σ/E)², rounded up
Method
Decide between z (population σ known) and t (only the sample s, with n − 1 degrees of freedom).
Find the critical value for the confidence level.
Margin of error: E = critical value × standard deviation/√n.
Interval: x̄ ± E.
Hypothesis tests & confidence intervals
z-test for a mean
z = (x̄ − μ0)/(σ/√n)
t-test for a mean
t = (x̄ − μ0)/(s/√n), df = n − 1
Two-sided at 5%
reject H0 if |z| > 1.96
Confidence interval
x̄ ± z·σ/√n
Method
State H₀ and H₁ and decide whether the test is one- or two-sided.
Calculate the test statistic: (x̄ − μ₀)/(σ/√n), or with s and t.
Compare with the critical value, or find the p-value.
Reject H₀ if the statistic is beyond the critical value (p below α), and state the conclusion in words.
2Practice problems
1.Evidence-based practice statisticsMedium
Practice exercise (made-up values, not clinical guidance). A new test was compared with the reference standard in a study (see the 2 × 2 table). Find the negative likelihood ratio LR−. Round to two decimal places.
a = 73b = 323c = 27d = 1377
LR− =
2.Evidence-based practice statisticsHard
Practice exercise (made-up values, not clinical guidance). A treatment reduces the risk of an event by 33% in relative terms (RRR = 33%). In a patient group the risk without treatment (CER) is 28% over five years. Find the number needed to treat NNT for five years to prevent one event. Round up to a whole number of patients.
RRR = 33%CER = 28%
NNT =
3.Descriptive statisticsMedium
Find the sample standard deviation s of the data: 32, 21, 21, 15, 58, 15.
n = 6
s =
4.Descriptive statisticsHard
A quantity is normally distributed with mean 70 and standard deviation 8. What proportion P of values is below 80?
μ = 70σ = 8x = 80
P =
5.Confidence intervalsMedium
A 90% confidence interval for a mean, based on 25 observations and a known σ, has a margin of error of 9.2. What is the margin of error E₂ if the same study uses 50 observations instead?
90%n₁ = 25E₁ = 9.2n₂ = 50
E₂ =
6.Confidence intervalsHard
Two fertilisers are tested. Plot group 1: 6 plots, mean yield 64 kg, standard deviation 7 kg. Plot group 2: 16 plots, mean 61 kg, standard deviation 8 kg. Assume equal variances (pooled t, df = n₁ + n₂ − 2). Find the margin of error E of the 99% confidence interval for μ₁ − μ₂.
A sample of 16 students has a mean score of 47.25 and a sample standard deviation of 5. Find the test statistic t for H₀: μ = 50.
μ₀ = 50x̄ = 47.25s = 5n = 16
t =
8.Hypothesis tests & confidence intervalsHard
How large must a sample be so that the 95% confidence interval for a mean has a margin of error of at most 2.5? The standard deviation is 4. Find the smallest sample size n.
σ = 4E = 2.595%
n =
3Solutions
1.Evidence-based practice statistics
Answer: LR− = 0.33
Likelihood ratios and risk measures: LR+ = sensitivity/(1 − specificity), LR− = (1 − sensitivity)/specificity. In a trial, EER and CER are the event rates with and without treatment: RR = EER/CER, ARR = CER − EER, RRR = ARR/CER and NNT = 1/ARR, rounded up. In a case-control study only the odds ratio OR = ad/(bc) can be used. An incidence rate = new cases/person-time.
Sensitivity and specificity
Se = 73/100 = 0.73
Sp = 1377/1700 = 0.81
Negative likelihood ratio
LR− = (1 − 0.73)/0.81 = 0.3333 ≈ 0.33
Answer
LR− = 0.33
2.Evidence-based practice statistics
Answer: NNT = 11
Predictive values depend on prevalence: PPV = Se·p/(Se·p + (1 − Sp)(1 − p)) and NPV = Sp(1 − p)/(Sp(1 − p) + (1 − Se)p). With likelihood ratios: pre-test odds = p/(1 − p), post-test odds = pre-test odds × LR, probability = odds/(1 + odds). For a population of N, true positives = N·p·Se and false positives = N·(1 − p)·(1 − Sp). NNT = 1/(CER × RRR), rounded up.
Absolute risk reduction
ARR = 0.28·0.33 = 0.0924
Number needed to treat
NNT = 1/0.0924 = 10.82 → 11
Answer
NNT = 11
The same relative effect gives a smaller NNT when the baseline risk is higher.
3.Descriptive statistics
Answer: s = 16.41
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = 1.25
Standard normal table
Φ(1.25) = 0.8944
P = 0.8944
Answer
P = 0.8944
5.Confidence intervals
Answer: E₂ = 6.505
Confidence interval for a mean: x̄ ± margin of error. With a known population σ the margin is z·σ/√n; with only the sample standard deviation s, use t with n − 1 degrees of freedom: t·s/√n. Critical values: z = 1.645 (90%), 1.96 (95%), 2.576 (99%). To get a margin E or smaller, you need n ≥ (z·σ/E)², rounded up.
Ratio of margins
E₂/E₁ = (1.645/1.645)·√(25/50) = 0.7071
New margin
E₂ = 9.2·0.7071 = 6.505
Answer
E₂ = 6.505
6.Confidence intervals
Answer: E = 10.57 kg
Interval for a difference: estimate ± critical value × standard error. For two independent means with known σ: SE = √(σ₁²/n₁ + σ₂²/n₂) and z. With equal unknown variances: pooled s_p and t with n₁ + n₂ − 2 degrees of freedom. For paired data, work with the differences: d̄ ± t·s_d/√n.
Pooled standard deviation
sp² = (5·7² + 15·8²)/20 = 60.25
sp = 7.762
Margin of error
E = 2.845·7.762·√(1/6 + 1/16) = 10.57
Answer
E = 10.57 kg
7.Hypothesis tests & confidence intervals
Answer: t = −2.2
Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).
Standard error
SE = 5/√16 = 5/4 = 1.25
Test statistic
t = (47.25 − 50)/1.25 = −2.2
Answer
t = −2.2
t0.025; df = 15 = 2.131
|t| > 2.131, so H₀ is rejected at the 5% level (two-sided).
8.Hypothesis tests & confidence intervals
Answer: n = 10
Testing a mean: the test statistic measures how many standard errors the sample mean lies from the value claimed in H₀: z = (x̄ − μ₀)/(σ/√n) when σ is known, t = (x̄ − μ₀)/(s/√n) when it is estimated from the sample. A confidence interval is x̄ ± (critical value)·(standard error).