Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
d1​ = 160 mmd2​ = 250 mm720 rpmT1​ = 1500 NT2​ = 375 NP = ?

A belt runs on a 160 mm driving pulley at 720 rpm. The tension is 1500 N on the tight side and 375 N on the slack side. Find the power P transmitted, in kW.

d1 = 160 mmn1 = 720 rpmT1 = 1500 NT2 = 375 N
P = kW
2.Gears & gear trainsHard
A = 32B = 45C = 16D = 72

In a compound gear train, gear A (32 teeth) on the input shaft turning at 2900 rpm drives gear B (45 teeth). Gear C (16 teeth) is fixed to the same shaft as B and drives gear D (72 teeth) on the output shaft. Find the output speed nout.

nin = 2900 rpmA = 32B = 45C = 16D = 72
nout = rpm
3.Torsion of shaftsMedium
d = 15 mmT = 40 N·m250 mmφ = 2.96°

In a torsion test, a solid specimen of diameter 15 mm is twisted by a torque of 40 N·m. The two ends of a gauge length of 250 mm rotate 2.96° relative to each other (the material is still elastic). Find the shear modulus G of the material.

T = 40 N·md = 15 mmL = 250 mmφ = 2.96°
G = GPa
4.Torsion of shaftsHard
Tdo​ = 75 mm, di​ = 53 mm

A hollow shaft transmits 20 kW at 1000 rpm. Find the maximum shear stress τmax in the shaft.

P = 20 kWN = 1000 rpmdo = 75 mmdi = 53 mm
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = −40σy​ = −30τxy​ = 50MPa

A point has σₓ = −40 MPa, σᵧ = −30 MPa and τₓᵧ = 50 MPa (tension positive). The element is rotated 25° counter-clockwise. Find the normal stress σy′ on the faces of the rotated element that are perpendicular to the rotated y′-axis.

σx = −40 MPaσy = −30 MPaτxy = 50 MPaθ = 25°
σy′ = MPa
6.Mohr’s circle & stress transformationHard
σx​ = 50σy​ = −80τxy​ = −30MPa

A point in a loaded part has σₓ = 50 MPa, σᵧ = −80 MPa and τₓᵧ = −30 MPa (tension positive). Find the shear stress τθ on a plane whose normal is rotated 30° clockwise from the x-axis (positive in the same sense as τₓᵧ).

σx = 50 MPaσy = −80 MPaτxy = −30 MPaθ = -30°
τθ = MPa
7.Axial stress & strainMedium
Ø 25 mmAluminium2 mP = 25 kN

Find the elongation δ of the aluminium bar under the axial load.

P = 25 kNd = 25 mmL = 2 mE = 70 GPa
δ = mm
8.Axial stress & strainHard
Ø 30 mmCopper0.5 mØ 12 mmAluminium1 mP = 25 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the total elongation δ.

P = 25 kNsegment 1: Ø30 mm, 0.5 m, copper (E = 117 GPa)segment 2: Ø12 mm, 1 m, aluminium (E = 70 GPa)
δ = mm
9.Column bucklingMedium
PL = 1.5 m30 × 60 mmcross-section

A column of length L made of steel is fixed at the base and free at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 1.5 mE = 200 GPa (steel)b × h = 30 × 60 mm
Pcr = kN
10.Column bucklingHard
PL = 5 md = 60 mmcross-section

A column of length L made of steel is pinned at both ends. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 5 mE = 200 GPa (steel)d = 60 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 40 kN/mζ = 0.4m = 10 kg

A 10 kg mass on a spring with a stiffness of 40 kN/m has a viscous damper giving a damping ratio of 0.4. Find the damped natural frequency fd of its free vibration in Hz.

m = 10 kgk = 40 kN/mζ = 0.4
fd = Hz
12.Mechanical vibrationsHard
k1​ = 40k2​ = 12k3​ = 100m = 5 kg

A 5 kg mass hangs from spring k₃ = 100 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 40 kN/m and k₂ = 12 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 40 kN/mk2 = 12 kN/mk3 = 100 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: P = 6.786 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 6.032 m/s

Power

P = (1500 − 375)·6.032 = 6786 W = 6.786 kW

Answer

P = 6.786 kW
2.Gears & gear trains

Answer: nout = 458.3 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 2900·32/45 = 2062 rpm = nC

Second stage

nout = 2062·16/72 = 458.3 rpm

Answer

nout = 458.3 rpm

total ratio = 6.328 : 1

3.Torsion of shafts

Answer: G = 38.95 GPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar moment and angle

J = π·15⁴/32 = 4970 mm⁴
φ = 2.96·π/180 = 0.05166 rad

Shear modulus

T = 40 N·m = 40000 N·mm
G = TL/(Jφ) = 40000·250/(4970·0.05166) = 38946 MPa
G = 38.95 GPa

Answer

G = 38.95 GPa

Compare: steel ≈ 80 GPa, brass ≈ 39 GPa, aluminium ≈ 26 GPa.

4.Torsion of shafts

Answer: τmax = 3.072 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·1000/60 = 104.7 rad/s
T = P/ω = 20000/104.7 = 191 N·m

Polar second moment of area

J = π(75⁴ − 53⁴)/32 = 2.332 × 10⁶ mm⁴

Maximum shear stress

τmax = T·(do/2)/J = 190986·37.5/2.332 × 10⁶ = 3.072 MPa

Answer

τmax = 3.072 MPa
5.Mohr’s circle & stress transformation

Answer: σy′ = −70.09 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation for the y′ face

σy′ = −35 − (−5)·0.6428 − 50·0.766 = −70.09 MPa

Check

The sum of the normal stresses does not change with rotation.

σx′ = 0.08828 MPa, σx′ + σy′ = −70 = σx + σy

Answer

σy′ = −70.09 MPa
6.Mohr’s circle & stress transformation

Answer: τθ = 41.29 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

τθ = −65·−0.866 + −30·0.5 = 41.29 MPa

Answer

τθ = 41.29 MPa
7.Axial stress & strain

Answer: δ = 1.455 mm

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·25²/4 = 490.9 mm²
σ = P/A = 25·1000/490.9 = 50.93 MPa

Strain (Hooke’s law)

E for aluminium = 70 GPa = 70000 MPa.

ε = σ/E = 50.93/70000 = 0.0007276 = 727.6 µε

Elongation

δ = ε·L = 0.0007276·2000 mm = 1.455 mm

Answer

δ = 1.455 mm
8.Axial stress & strain

Answer: δ = 3.309 mm

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·30²/4 = 706.9 mm², A2 = π·12²/4 = 113.1 mm²
σ1 = 35.37 MPa
σ2 = 221 MPa

Add the segment elongations

δ1 = σ1L1/E1 = 35.37·500/117000 = 0.1511 mm
δ2 = σ2L2/E2 = 221·1000/70000 = 3.158 mm
δ = δ1 + δ2 = 3.309 mm

Answer

δ = 3.309 mm
9.Column buckling

Answer: Pcr = 29.61 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 60·30³/12 = 135000 mm⁴

Effective length

KL = 2·1500 = 3000 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·135000/3000² = 29609 N = 29.61 kN

Answer

Pcr = 29.61 kN
10.Column buckling

Answer: σcr = 17.77 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·60⁴/64 = 636173 mm⁴

Radius of gyration and slenderness

A = 2827 mm²
r = √(I/A) = √(636173/2827) = 15 mm
KL = 1·5000 = 5000 mm
KL/r = 5000/15 = 333.3

Critical stress

σcr = π²E/(KL/r)² = π²·200000/333.3² = 17.77 MPa

Answer

σcr = 17.77 MPa
11.Mechanical vibrations

Answer: fd = 9.225 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(40000/10) = 63.25 rad/s
fn = 63.25/(2π) = 10.07 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 10.07·√(1 − 0.4²) = 9.225 Hz

Answer

fd = 9.225 Hz
12.Mechanical vibrations

Answer: fn = 13.16 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 40 + 12 = 52 kN/m
keq = 52·100/(52 + 100) = 34.21 kN/m

Natural frequency

ωn = √(34211/5) = 82.72 rad/s
fn = 82.72/(2π) = 13.16 Hz

Answer

fn = 13.16 Hz

ExamProblems · examproblems.com/courses/machine-design