Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 20, m = 3 mm

A 2.2 kW motor running at 2900 rpm drives a pinion with 20 teeth and a module of 3 mm. Find the tangential force Ft on the pinion teeth.

P = 2.2 kWn = 2900 rpmN1 = 20m = 3 mm
Ft = N
2.Gears & gear trainsHard
A = 45B = 50C = 16D = 24

A 15 kW motor at 1440 rpm drives gear A (45 teeth), which meshes with gear B (50 teeth). Gear C (16 teeth) on the same shaft as B drives gear D (24 teeth) on the output shaft. Each gear mesh has an efficiency of 97%. Find the output torque Tout.

P = 15 kWnin = 1440 rpmA = 45B = 50C = 16D = 24ηmesh = 97%
Tout = N·m
3.Torsion of shaftsMedium
d = ?T = 500 N·mL = 1.2 m

A solid aluminium shaft 1.2 m long carries a torque of 500 N·m. The angle of twist between its ends must not exceed 2°. Find the smallest diameter d that meets this limit.

T = 500 N·mL = 1.2 mG = 26 GPaφallow = 2°
d = mm
4.Torsion of shaftsHard
d = 60 mmTB​ = 250 N·mTC​ = 400 N·mABC1.2 m0.5 m

A solid aluminium shaft of diameter 60 mm is fixed at A. A torque of 250 N·m acts at B, 1.2 m from A, and a torque of 400 N·m in the opposite direction acts at the free end C, a further 0.5 m along. Find the magnitude of the angle of twist φC of end C, in degrees.

d = 60 mmTB = 250 N·mTC = 400 N·mAB = 1.2 mBC = 0.5 mG = 26 GPa
φC = °
5.Mohr’s circle & stress transformationMedium
σx​ = 40σy​ = −60τxy​ = −10MPa

A point in a loaded part has σₓ = 40 MPa, σᵧ = −60 MPa and τₓᵧ = −10 MPa (tension positive). Find the angle θp from the x-axis to the direction of the largest principal stress, between −90° and 90°.

σx = 40 MPaσy = −60 MPaτxy = −10 MPa
θp = °
6.Mohr’s circle & stress transformationHard
σx​ = 130σy​ = −30τxy​ = 60MPa

A point in a loaded part has σₓ = 130 MPa, σᵧ = −30 MPa and τₓᵧ = 60 MPa (tension positive). Find the shear stress τθ on a plane whose normal is rotated 30° clockwise from the x-axis (positive in the same sense as τₓᵧ).

σx = 130 MPaσy = −30 MPaτxy = 60 MPaθ = -30°
τθ = MPa
7.Axial stress & strainMedium
P = ?12600 mm200 mmØ25Ø40δ = 0.25 mm

A bar is made of a steel segment (diameter 25 mm, length 600 mm, E = 200 GPa) joined end to end with a segment made of aluminium (diameter 40 mm, length 200 mm, E = 70 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.25 mm in total.

segment 1: steel, Ø25 mm, 600 mm, E = 200 GPasegment 2: aluminium, Ø40 mm, 200 mm, E = 70 GPaδ = 0.25 mm
P = kN
8.Axial stress & strainHard
40 kN12600 mm200 mmØ20Ø50σ2​ = ?

A steel segment (diameter 20 mm, length 600 mm, E = 200 GPa) and a segment made of brass (diameter 50 mm, length 200 mm, E = 100 GPa) are joined end to end and fixed between two rigid walls. An axial load of 40 kN acts at the joint, towards segment 2. Find the magnitude of the stress σ2 in segment 2.

segment 1: steel, Ø20 mm, 600 mm, E = 200 GPasegment 2: brass, Ø50 mm, 200 mm, E = 100 GPaP = 40 kN
σ2 = MPa
9.Column bucklingMedium
PL = 2.5 m30 × 80 mmcross-section

A column of length L made of aluminium is fixed at the base and free at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 2.5 mE = 70 GPa (aluminium)b × h = 30 × 80 mm
Pcr = kN
10.Column bucklingHard
PL = 2 md = 20 mmcross-section

A column of length L made of aluminium is fixed at the base and pinned at the top. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 2 mE = 70 GPa (aluminium)d = 20 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 200 kN/mc = 2000 N·s/mm = 20 kg

A 20 kg mass is supported by a spring with a stiffness of 200 kN/m and a viscous damper with a damping coefficient of 2000 N·s/m. Find the damping ratio ζ.

m = 20 kgk = 200 kN/mc = 2000 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 10k2​ = 10m = 100 kg

A 100 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 10 kN/m and k₂ = 10 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 10 kN/mk2 = 10 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: Ft = 241.5 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·2900/60 = 303.7 rad/s
T = P/ω = 2200/303.7 = 7.244 N·m

Pitch diameter

d = m·N = 3·20 = 60 mm

Tangential force

Ft = 2T/d = 2·7.244/0.06 = 241.5 N

Answer

Ft = 241.5 N
2.Gears & gear trains

Answer: Tout = 156 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1440·(45/50)·(16/24) = 864 rpm
ωout = 2π·864/60 = 90.48 rad/s

Output power and torque

Pout = 15000·0.97² = 14114 W
Tout = Pout/ωout = 14114/90.48 = 156 N·m

Answer

Tout = 156 N·m
3.Torsion of shafts

Answer: d = 50.94 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Required polar moment

T = 500 N·m = 500000 N·mm
L = 1.2 m = 1200 mm
G = 26 GPa = 26000 MPa
φ = 2·π/180 = 0.03491 rad
J = TL/(Gφ) = 500000·1200/(26000·0.03491) = 661105 mm⁴

Diameter

d = (32J/π)1/4 = 50.94 mm

Answer

d = 50.94 mm

In practice you would round up to the next standard size.

4.Torsion of shafts

Answer: φC = 0.6582 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Internal torques

Sense of TC taken as positive.

TBC = TC = 400 N·m
TAB = TC − TB = 400 − 250 = 150 N·m

Twist of each segment

J = π·60⁴/32 = 1.272 × 10⁶ mm⁴
G = 26 GPa = 26000 MPa
φAB = 150000·1200/(26000·1.272 × 10⁶) = 0.005441 rad
φBC = 400000·500/(26000·1.272 × 10⁶) = 0.006046 rad

Twist of end C

φC = 0.005441 + 0.006046 = 0.01149 rad → |φC| = 0.6582°

Answer

φC = 0.6582°
5.Mohr’s circle & stress transformation

Answer: θp = −5.655 °

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCσ1​σ2​

Angle on the circle

Point x sits at an angle 2θp from the σ-axis on Mohr’s circle; the quadrant follows from the signs of σₓ − σᵧ and τₓᵧ.

2θp = atan2(2·−10, 40 − −60) = −11.31°

Angle on the element

θp = −5.655°

Answer

θp = −5.655°

Positive angles are counter-clockwise.

6.Mohr’s circle & stress transformation

Answer: τθ = 99.28 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

τθ = −80·−0.866 + 60·0.5 = 99.28 MPa

Answer

τθ = 99.28 MPa
7.Axial stress & strain

Answer: P = 29.81 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 490.9 mm², A₂ = 1257 mm²

Flexibilities

L₁/(E₁A₁) = 600/(200000·490.9) = 6.112 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 200/(70000·1257) = 2.274 × 10⁻⁶ mm/N

Load

P = 0.25/8.385 × 10⁻⁶ = 29814 N = 29.81 kN

Answer

P = 29.81 kN
8.Axial stress & strain

Answer: σ2 = 18.41 MPa

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Stiffnesses

k₁ = 200000·314.2/600 = 104720 N/mm
k₂ = 100000·1963/200 = 981748 N/mm

Share of segment 2

F2 = 40000·981748/1.086 × 10⁶ = 36145 N

Stress

σ2 = 36145/1963 = 18.41 MPa (compression)

Answer

σ2 = 18.41 MPa
9.Column buckling

Answer: Pcr = 4.974 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 80·30³/12 = 180000 mm⁴

Effective length

KL = 2·2500 = 5000 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·180000/5000² = 4974 N = 4.974 kN

Answer

Pcr = 4.974 kN
10.Column buckling

Answer: σcr = 8.812 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·20⁴/64 = 7854 mm⁴

Radius of gyration and slenderness

A = 314.2 mm²
r = √(I/A) = √(7854/314.2) = 5 mm
KL = 0.7·2000 = 1400 mm
KL/r = 1400/5 = 280

Critical stress

σcr = π²E/(KL/r)² = π²·70000/280² = 8.812 MPa

Answer

σcr = 8.812 MPa
11.Mechanical vibrations

Answer: ζ = 0.5

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(200000·20) = 4000 N·s/m

Damping ratio

ζ = c/cc = 2000/4000 = 0.5

Answer

ζ = 0.5

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: fn = 2.251 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 10 + 10 = 20 kN/m

Natural frequency

ωn = √(20000/100) = 14.14 rad/s
fn = 14.14/(2π) = 2.251 Hz

Answer

fn = 2.251 Hz

ExamProblems · examproblems.com/courses/machine-design