Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 18N2​ = 24

A 0.75 kW motor running at 1440 rpm drives a pinion with 18 teeth, which meshes with a gear with 24 teeth. The gear pair has an efficiency of 96%. Find the torque T1 on the motor shaft.

P = 0.75 kWn1 = 1440 rpmN1 = 18N2 = 24η = 96%
T1 = N·m
2.Gears & gear trainsHard
Ns​ = 20nr​ = ?Np​ = 18carrier fixed

In a planetary gear set the sun gear has 20 teeth and each planet gear has 18 teeth. The planet carrier is held fixed and the sun is driven at 1500 rpm. Find the speed nr of the ring gear (magnitude).

Ns = 20Np = 18ns = 1500 rpm
nr = rpm
3.Torsion of shaftsMedium
T = 750 N·md = 50 mmL = 2 mφ = ?

A solid steel shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 750 N·md = 50 mmL = 2 mG = 80 GPa
φ = °
4.Torsion of shaftsHard
Td = ?

A solid shaft must transmit 50 kW at 3000 rpm without the shear stress exceeding 50 MPa. Find the smallest diameter d that works.

P = 50 kWN = 3000 rpmτallow = 50 MPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 140σy​ = 50τxy​ = 30MPa

A point in a thin plate is in plane stress: σₓ = 140 MPa, σᵧ = 50 MPa and τₓᵧ = 30 MPa, with σz = 0. Find the absolute maximum shear stress τabs at the point (considering all planes in three dimensions).

σx = 140 MPaσy = 50 MPaτxy = 30 MPaσz = 0
τabs = MPa
6.Mohr’s circle & stress transformationHard
σx​ = −50σy​ = 30τxy​ = 30MPa

A point in a thin plate is in plane stress: σₓ = −50 MPa, σᵧ = 30 MPa and τₓᵧ = 30 MPa (σz = 0). Find the von Mises equivalent stress σvM.

σx = −50 MPaσy = 30 MPaτxy = 30 MPa
σvM = MPa
7.Axial stress & strainMedium
200 kNØ25100 GPaØ100/60500 mmδ = ?

A steel rod (diameter 25 mm, E = 200 GPa) sits inside a tube made of brass (outer diameter 100 mm, inner diameter 60 mm, E = 100 GPa). Both are 500 mm long and are compressed together between rigid plates by 200 kN. Find the shortening δ.

P = 200 kNrod: Ø25 mm, E = 200 GPatube: Ø100/Ø60 mm, E = 100 GPaL = 500 mm
δ = mm
8.Axial stress & strainHard
P = ?Ø40100 GPaØ100/60400 mm

A steel rod (diameter 40 mm, E = 200 GPa, allowable stress 120 MPa) sits inside a tube made of brass (outer diameter 100 mm, inner diameter 60 mm, E = 100 GPa, allowable stress 50 MPa). They are compressed together between rigid plates. Find the largest load Pmax.

rod: Ø40 mm, E = 200 GPa, σallow = 120 MPatube: Ø100/Ø60 mm, E = 100 GPa, σallow = 50 MPa
Pmax = kN
9.Column bucklingMedium
PL = 1 m25 × 60 mmcross-section

A column of length L made of steel is fixed at the base and free at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 1 mE = 200 GPa (steel)b × h = 25 × 60 mm
Pcr = kN
10.Column bucklingHard
PL = 3 md = 60 mmcross-section

A column of length L made of steel is pinned at both ends. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 3 mE = 200 GPa (steel)d = 60 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 100 kN/mζ = 0.45m = 150 kg

A 150 kg mass on a spring with a stiffness of 100 kN/m has a viscous damper giving a damping ratio of 0.45. Find the damped natural frequency fd of its free vibration in Hz.

m = 150 kgk = 100 kN/mζ = 0.45
fd = Hz
12.Mechanical vibrationsHard
k1​ = 80k2​ = 20k3​ = 100m = 40 kg

A 40 kg mass hangs from spring k₃ = 100 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 80 kN/m and k₂ = 20 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 80 kN/mk2 = 20 kN/mk3 = 100 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: T1 = 4.974 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 750/150.8 = 4.974 N·m

Answer

T1 = 4.974 N·m
2.Gears & gear trains

Answer: nr = 535.7 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 20 + 2·18 = 56

Willis equation with the carrier fixed

With nc = 0 the sun drives the ring through the planets, which act as idlers.

nr = −ns·Ns/Nr = −1500·20/56 = −535.7 rpm
|nr| = 535.7 rpm

Answer

nr = 535.7 rpm

The ring turns opposite to the sun.

3.Torsion of shafts

Answer: φ = 1.751 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·50⁴/32 = 613592 mm⁴

Angle of twist

φ = TL/(GJ) = 750·1000·2000/(80000·613592) = 0.03056 rad
φ = 0.03056·180/π = 1.751°

Answer

φ = 1.751°
4.Torsion of shafts

Answer: d = 25.31 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·3000/60 = 314.2 rad/s
T = P/ω = 50000/314.2 = 159.2 N·m

Diameter from the allowable stress

d = ∛(16T/(π·τallow)) = ∛(16·159155/(π·50)) = 25.31 mm

Answer

d = 25.31 mm

In practice you would round up to the next standard size.

5.Mohr’s circle & stress transformation

Answer: τabs = 74.54 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. In three dimensions the absolute maximum shear stress is (σmax − σmin)/2 over all three principal stresses; in plane stress the third one is zero.

στxyCσ1​σ2​

In-plane principal stresses

C = 95 MPa, R = √(45² + 30²) = 54.08 MPa
σ1 = 149.1 MPa, σ2 = 40.92 MPa, σz = 0

Largest of the three circles

τ = max(|σ1 − σ2|, |σ1|, |σ2|)/2 = max(108.2, 149.1, 40.92)/2 = 74.54 MPa

Answer

τabs = 74.54 MPa

Here the out-of-plane circle governs: the absolute maximum is larger than the in-plane maximum R.

6.Mohr’s circle & stress transformation

Answer: σvM = 87.18 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. Yield criteria: von Mises predicts yield when σvM = √(σ₁² − σ₁σ₂ + σ₂²) reaches σY; Tresca when the absolute maximum shear stress reaches σY/2.

στxyCσ1​σ2​

Principal stresses

C = −10 MPa, R = 50 MPa
σ1 = 40 MPa, σ2 = −60 MPa, σ3 = 0

Von Mises

σvM = √(40² − 40·(−60) + (−60)²) = 87.18 MPa

Answer

σvM = 87.18 MPa
7.Axial stress & strain

Answer: δ = 0.1664 mm

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·25²/4 = 490.9 mm²
At = π(100² − 60²)/4 = 5027 mm²

Combined axial stiffness

ΣEA = 200·10³·490.9 + 100·10³·5027 = 6.008 × 10⁸ N

Shortening

δ = 200000·500/6.008 × 10⁸ = 0.1664 mm

Answer

δ = 0.1664 mm
8.Axial stress & strain

Answer: Pmax = 377 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·40²/4 = 1257 mm²
At = π(100² − 60²)/4 = 5027 mm²

Combined axial stiffness

ΣEA = 200·10³·1257 + 100·10³·5027 = 7.54 × 10⁸ N

Governing strain

ε = min(0.0006, 0.0005) = 0.0005 (brass)

Largest load

Pmax = 0.0005·7.54 × 10⁸ = 376991 N = 377 kN

Answer

Pmax = 377 kN
9.Column buckling

Answer: Pcr = 38.55 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 60·25³/12 = 78125 mm⁴

Effective length

KL = 2·1000 = 2000 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·78125/2000² = 38553 N = 38.55 kN

Answer

Pcr = 38.55 kN
10.Column buckling

Answer: σcr = 49.35 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·60⁴/64 = 636173 mm⁴

Radius of gyration and slenderness

A = 2827 mm²
r = √(I/A) = √(636173/2827) = 15 mm
KL = 1·3000 = 3000 mm
KL/r = 3000/15 = 200

Critical stress

σcr = π²E/(KL/r)² = π²·200000/200² = 49.35 MPa

Answer

σcr = 49.35 MPa
11.Mechanical vibrations

Answer: fd = 3.67 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(100000/150) = 25.82 rad/s
fn = 25.82/(2π) = 4.109 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 4.109·√(1 − 0.45²) = 3.67 Hz

Answer

fd = 3.67 Hz
12.Mechanical vibrations

Answer: fn = 5.627 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 80 + 20 = 100 kN/m
keq = 100·100/(100 + 100) = 50 kN/m

Natural frequency

ωn = √(50000/40) = 35.36 rad/s
fn = 35.36/(2π) = 5.627 Hz

Answer

fn = 5.627 Hz

ExamProblems · examproblems.com/courses/machine-design