Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
d1​ = 150 mmd2​ = 450 mm960 rpmn2​ = ?

A 150 mm pulley at 960 rpm drives a 450 mm pulley by a belt with 4 % slip. Find the speed n2 of the driven pulley.

n1 = 960 rpmd1 = 150 mmd2 = 450 mms = 4 %
n2 = rpm
2.Gears & gear trainsHard
A = 24B = 32C = 36D = 80

A 3 kW motor at 1450 rpm drives gear A (24 teeth), which meshes with gear B (32 teeth). Gear C (36 teeth) on the same shaft as B drives gear D (80 teeth) on the output shaft. Each gear mesh has an efficiency of 95%. Find the output torque Tout.

P = 3 kWnin = 1450 rpmA = 24B = 32C = 36D = 80ηmesh = 95%
Tout = N·m
3.Torsion of shaftsMedium
T = 250 N·md = 25 mmL = 0.8 mφ = ?

A solid brass shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 250 N·md = 25 mmL = 0.8 mG = 39 GPa
φ = °
4.Torsion of shaftsHard
Tdo​ = 80 mm, di​ = 60 mm

A hollow shaft transmits 15 kW at 500 rpm. Find the maximum shear stress τmax in the shaft.

P = 15 kWN = 500 rpmdo = 80 mmdi = 60 mm
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = −50σy​ = −20τxy​ = −20MPa

A point in a loaded part has σₓ = −50 MPa, σᵧ = −20 MPa and τₓᵧ = −20 MPa (tension positive). Find the maximum in-plane shear stress τmax.

σx = −50 MPaσy = −20 MPaτxy = −20 MPa
τmax = MPa
6.Mohr’s circle & stress transformationHard
σx​ = 60σy​ = −40τxy​ = 10MPa

A point in a thin plate is in plane stress: σₓ = 60 MPa, σᵧ = −40 MPa and τₓᵧ = 10 MPa (σz = 0). The material has a yield strength of 275 MPa. Find the factor of safety n against yielding by the Tresca (maximum shear stress) criterion.

σx = 60 MPaσy = −40 MPaτxy = 10 MPaσY = 275 MPa
n =
7.Axial stress & strainMedium
P = ?12400 mm300 mmØ40Ø40δ = 0.5 mm

A bar is made of a steel segment (diameter 40 mm, length 400 mm, E = 200 GPa) joined end to end with a segment made of bronze (diameter 40 mm, length 300 mm, E = 110 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.5 mm in total.

segment 1: steel, Ø40 mm, 400 mm, E = 200 GPasegment 2: bronze, Ø40 mm, 300 mm, E = 110 GPaδ = 0.5 mm
P = kN
8.Axial stress & strainHard
Ø 30 mmCopper0.5 mØ 16 mmAluminium1.5 mP = 15 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the largest normal stress σmax in the bar.

P = 15 kNsegment 1: Ø30 mm, 0.5 m, copper (E = 117 GPa)segment 2: Ø16 mm, 1.5 m, aluminium (E = 70 GPa)
σmax = MPa
9.Column bucklingMedium
PL = 6 m30 × 100 mmcross-section

A column of length L made of steel is fixed at the base and free at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 6 mE = 200 GPa (steel)b × h = 30 × 100 mm
Pcr = kN
10.Column bucklingHard
PL = 1.5 md = 30 mmcross-section

A column of length L made of aluminium is fixed at the base and pinned at the top. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 1.5 mE = 70 GPa (aluminium)d = 30 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 100 kN/mζ = 0.5m = 50 kg

A 50 kg mass on a spring with a stiffness of 100 kN/m has a viscous damper giving a damping ratio of 0.5. Find the damped natural frequency fd of its free vibration in Hz.

m = 50 kgk = 100 kN/mζ = 0.5
fd = Hz
12.Mechanical vibrationsHard
k1​ = 12k2​ = 100m = 40 kg

A 40 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 12 kN/m and k₂ = 100 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 12 kN/mk2 = 100 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: n2 = 307.2 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

960·150/450 = 320 rpm

With slip

n2 = 320·0.96 = 307.2 rpm

Answer

n2 = 307.2 rpm
2.Gears & gear trains

Answer: Tout = 52.83 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1450·(24/32)·(36/80) = 489.4 rpm
ωout = 2π·489.4/60 = 51.25 rad/s

Output power and torque

Pout = 3000·0.95² = 2708 W
Tout = Pout/ωout = 2708/51.25 = 52.83 N·m

Answer

Tout = 52.83 N·m
3.Torsion of shafts

Answer: φ = 7.662 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·25⁴/32 = 38350 mm⁴

Angle of twist

φ = TL/(GJ) = 250·1000·800/(39000·38350) = 0.1337 rad
φ = 0.1337·180/π = 7.662°

Answer

φ = 7.662°
4.Torsion of shafts

Answer: τmax = 4.169 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·500/60 = 52.36 rad/s
T = P/ω = 15000/52.36 = 286.5 N·m

Polar second moment of area

J = π(80⁴ − 60⁴)/32 = 2.749 × 10⁶ mm⁴

Maximum shear stress

τmax = T·(do/2)/J = 286479·40/2.749 × 10⁶ = 4.169 MPa

Answer

τmax = 4.169 MPa
5.Mohr’s circle & stress transformation

Answer: τmax = 25 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCτmax​

Radius of Mohr’s circle

τmax = R = √(((−50 − −20)/2)² + −20²) = 25 MPa

Answer

τmax = 25 MPa
6.Mohr’s circle & stress transformation

Answer: n = 2.697

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. Yield criteria: von Mises predicts yield when σvM = √(σ₁² − σ₁σ₂ + σ₂²) reaches σY; Tresca when the absolute maximum shear stress reaches σY/2.

στxyCσ1​σ2​

Principal stresses

C = 10 MPa, R = 50.99 MPa
σ1 = 60.99 MPa, σ2 = −40.99 MPa, σ3 = 0

Tresca

σmax − σmin = 102 MPa
n = 275/102 = 2.697

Answer

n = 2.697

n > 1 means the point does not yield; Tresca is slightly more conservative than von Mises.

7.Axial stress & strain

Answer: P = 132.9 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 1257 mm², A₂ = 1257 mm²

Flexibilities

L₁/(E₁A₁) = 400/(200000·1257) = 1.592 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 300/(110000·1257) = 2.17 × 10⁻⁶ mm/N

Load

P = 0.5/3.762 × 10⁻⁶ = 132914 N = 132.9 kN

Answer

P = 132.9 kN
8.Axial stress & strain

Answer: σmax = 74.6 MPa

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·30²/4 = 706.9 mm², A2 = π·16²/4 = 201.1 mm²
σ1 = 21.22 MPa
σ2 = 74.6 MPa

Largest stress

The thinner segment has the smaller area, so it carries the larger stress.

σmax = 74.6 MPa

Answer

σmax = 74.6 MPa
9.Column buckling

Answer: Pcr = 3.084 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 100·30³/12 = 225000 mm⁴

Effective length

KL = 2·6000 = 12000 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·225000/12000² = 3084 N = 3.084 kN

Answer

Pcr = 3.084 kN
10.Column buckling

Answer: σcr = 35.25 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·30⁴/64 = 39761 mm⁴

Radius of gyration and slenderness

A = 706.9 mm²
r = √(I/A) = √(39761/706.9) = 7.5 mm
KL = 0.7·1500 = 1050 mm
KL/r = 1050/7.5 = 140

Critical stress

σcr = π²E/(KL/r)² = π²·70000/140² = 35.25 MPa

Answer

σcr = 35.25 MPa
11.Mechanical vibrations

Answer: fd = 6.164 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(100000/50) = 44.72 rad/s
fn = 44.72/(2π) = 7.118 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 7.118·√(1 − 0.5²) = 6.164 Hz

Answer

fd = 6.164 Hz
12.Mechanical vibrations

Answer: fn = 8.422 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 12 + 100 = 112 kN/m

Natural frequency

ωn = √(112000/40) = 52.92 rad/s
fn = 52.92/(2π) = 8.422 Hz

Answer

fn = 8.422 Hz

ExamProblems · examproblems.com/courses/machine-design