Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 12N2​ = 20

A 1.5 kW motor running at 1440 rpm drives a pinion with 12 teeth, which meshes with a gear with 20 teeth. The gear pair has an efficiency of 98%. Find the torque T1 on the motor shaft.

P = 1.5 kWn1 = 1440 rpmN1 = 12N2 = 20η = 98%
T1 = N·m
2.Gears & gear trainsHard
A = 15B = 32C = 25D = 72

In a compound gear train, gear A (15 teeth) on the input shaft turning at 960 rpm drives gear B (32 teeth). Gear C (25 teeth) is fixed to the same shaft as B and drives gear D (72 teeth) on the output shaft. Find the output speed nout.

nin = 960 rpmA = 15B = 32C = 25D = 72
nout = rpm
3.Torsion of shaftsMedium
T = 500 N·md = 40 mmL = 1.5 mφ = ?

A solid steel shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 500 N·md = 40 mmL = 1.5 mG = 80 GPa
φ = °
4.Torsion of shaftsHard
Td = ?

A solid shaft must transmit 100 kW at 1800 rpm without the shear stress exceeding 60 MPa. Find the smallest diameter d that works.

P = 100 kWN = 1800 rpmτallow = 60 MPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 160σy​ = 30τxy​ = −30MPa

A point in a loaded part has σₓ = 160 MPa, σᵧ = 30 MPa and τₓᵧ = −30 MPa (tension positive). Find the maximum in-plane shear stress τmax.

σx = 160 MPaσy = 30 MPaτxy = −30 MPa
τmax = MPa
6.Mohr’s circle & stress transformationHard
σx​ = 100σy​ = −80τxy​ = 30MPa

A point in a loaded part has σₓ = 100 MPa, σᵧ = −80 MPa and τₓᵧ = 30 MPa (tension positive). Find the shear stress τθ on a plane whose normal is rotated 20° counter-clockwise from the x-axis (positive in the same sense as τₓᵧ).

σx = 100 MPaσy = −80 MPaτxy = 30 MPaθ = 20°
τθ = MPa
7.Axial stress & strainMedium
100 kNØ3070 GPaØ100/70800 mmδ = ?

A steel rod (diameter 30 mm, E = 200 GPa) sits inside a tube made of aluminium (outer diameter 100 mm, inner diameter 70 mm, E = 70 GPa). Both are 800 mm long and are compressed together between rigid plates by 100 kN. Find the shortening δ.

P = 100 kNrod: Ø30 mm, E = 200 GPatube: Ø100/Ø70 mm, E = 70 GPaL = 800 mm
δ = mm
8.Axial stress & strainHard
30 kN12500 mm200 mmØ25Ø40σ2​ = ?

A steel segment (diameter 25 mm, length 500 mm, E = 200 GPa) and a segment made of copper (diameter 40 mm, length 200 mm, E = 120 GPa) are joined end to end and fixed between two rigid walls. An axial load of 30 kN acts at the joint, towards segment 2. Find the magnitude of the stress σ2 in segment 2.

segment 1: steel, Ø25 mm, 500 mm, E = 200 GPasegment 2: copper, Ø40 mm, 200 mm, E = 120 GPaP = 30 kN
σ2 = MPa
9.Column bucklingMedium
PL = 4 m50 × 100 mmcross-section

A column of length L made of steel is fixed at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 4 mE = 200 GPa (steel)b × h = 50 × 100 mm
Pcr = kN
10.Column bucklingHard
P = 150 kNL = 5 md = ?cross-section

A solid round column of length L made of aluminium is fixed at the base and pinned at the top. It must carry 150 kN with a factor of safety of 2 against buckling. Find the smallest diameter d.

P = 150 kNn = 2L = 5 mE = 70 GPa (aluminium)
d = mm
11.Mechanical vibrationsMedium
k = 15 kN/mc = 90 N·s/mm = 15 kg

A 15 kg mass is supported by a spring with a stiffness of 15 kN/m and a viscous damper with a damping coefficient of 90 N·s/m. Find the damping ratio ζ.

m = 15 kgk = 15 kN/mc = 90 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 5k2​ = 15m = 100 kg

A 100 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 5 kN/m and the lower one k₂ = 15 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 5 kN/mk2 = 15 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: T1 = 9.947 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 1500/150.8 = 9.947 N·m

Answer

T1 = 9.947 N·m
2.Gears & gear trains

Answer: nout = 156.3 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 960·15/32 = 450 rpm = nC

Second stage

nout = 450·25/72 = 156.3 rpm

Answer

nout = 156.3 rpm

total ratio = 6.144 : 1

3.Torsion of shafts

Answer: φ = 2.137 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·40⁴/32 = 251327 mm⁴

Angle of twist

φ = TL/(GJ) = 500·1000·1500/(80000·251327) = 0.0373 rad
φ = 0.0373·180/π = 2.137°

Answer

φ = 2.137°
4.Torsion of shafts

Answer: d = 35.58 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·1800/60 = 188.5 rad/s
T = P/ω = 100000/188.5 = 530.5 N·m

Diameter from the allowable stress

d = ∛(16T/(π·τallow)) = ∛(16·530516/(π·60)) = 35.58 mm

Answer

d = 35.58 mm

In practice you would round up to the next standard size.

5.Mohr’s circle & stress transformation

Answer: τmax = 71.59 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCτmax​

Radius of Mohr’s circle

τmax = R = √(((160 − 30)/2)² + −30²) = 71.59 MPa

Answer

τmax = 71.59 MPa
6.Mohr’s circle & stress transformation

Answer: τθ = −34.87 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

τθ = −90·0.6428 + 30·0.766 = −34.87 MPa

Answer

τθ = −34.87 MPa
7.Axial stress & strain

Answer: δ = 0.1897 mm

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·30²/4 = 706.9 mm²
At = π(100² − 70²)/4 = 4006 mm²

Combined axial stiffness

ΣEA = 200·10³·706.9 + 70·10³·4006 = 4.218 × 10⁸ N

Shortening

δ = 100000·800/4.218 × 10⁸ = 0.1897 mm

Answer

δ = 0.1897 mm
8.Axial stress & strain

Answer: σ2 = 18.94 MPa

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Stiffnesses

k₁ = 200000·490.9/500 = 196350 N/mm
k₂ = 120000·1257/200 = 753982 N/mm

Share of segment 2

F2 = 30000·753982/950332 = 23802 N

Stress

σ2 = 23802/1257 = 18.94 MPa (compression)

Answer

σ2 = 18.94 MPa
9.Column buckling

Answer: Pcr = 514 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 100·50³/12 = 1.042 × 10⁶ mm⁴

Effective length

KL = 0.5·4000 = 2000 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·1.042 × 10⁶/2000² = 514042 N = 514 kN

Answer

Pcr = 514 kN
10.Column buckling

Answer: d = 102 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2·150000 = 300000 N
KL = 0.7·5000 = 3500 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·300000·3500²/(π³·70000))^(1/4) = 102 mm

Answer

d = 102 mm

Check: the slenderness KL/r is 137.2, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: ζ = 0.09487

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(15000·15) = 948.7 N·s/m

Damping ratio

ζ = c/cc = 90/948.7 = 0.09487

Answer

ζ = 0.09487

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: fn = 0.9746 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/5 + 1/15 → keq = 5·15/(5 + 15) = 3.75 kN/m

Natural frequency

ωn = √(3750/100) = 6.124 rad/s
fn = 6.124/(2π) = 0.9746 Hz

Answer

fn = 0.9746 Hz

ExamProblems · examproblems.com/courses/machine-design