Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 18, m = 2 mm

An 11 kW motor running at 1440 rpm drives a pinion with 18 teeth and a module of 2 mm. Find the tangential force Ft on the pinion teeth.

P = 11 kWn = 1440 rpmN1 = 18m = 2 mm
Ft = N
2.Gears & gear trainsHard
d1​ = 80 mmd2​ = 450 mm720 rpmC = 800 mmT1​ = 1500 NT2​P = ?

An open belt connects an 80 mm driving pulley at 720 rpm to a 450 mm pulley; the centres are 800 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 1500 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 80 mmn1 = 720 rpmd2 = 450 mmC = 800 mmμ = 0.25T1 = 1500 N
P = kW
3.Torsion of shaftsMedium
d = 15 mmT = 100 N·m250 mmφ = 11.08°

In a torsion test, a solid specimen of diameter 15 mm is twisted by a torque of 100 N·m. The two ends of a gauge length of 250 mm rotate 11.08° relative to each other (the material is still elastic). Find the shear modulus G of the material.

T = 100 N·md = 15 mmL = 250 mmφ = 11.08°
G = GPa
4.Torsion of shaftsHard
Td = ?

A solid shaft must transmit 100 kW at 1500 rpm without the shear stress exceeding 40 MPa. Find the smallest diameter d that works.

P = 100 kWN = 1500 rpmτallow = 40 MPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 100σy​ = 40τxy​ = 40MPa

A point in a loaded part has σₓ = 100 MPa, σᵧ = 40 MPa and τₓᵧ = 40 MPa (tension positive). Find the angle θp from the x-axis to the direction of the largest principal stress, between −90° and 90°.

σx = 100 MPaσy = 40 MPaτxy = 40 MPa
θp = °
6.Mohr’s circle & stress transformationHard
σx​τxy​top surface of the shaft

A solid shaft of diameter 50 mm carries a bending moment of 1500 N·m together with a torque of 1000 N·m. At the top surface, where the bending stress is tensile and largest, find the largest principal stress σ1.

d = 50 mmM = 1500 N·mT = 1000 N·m
σ1 = MPa
7.Axial stress & strainMedium
Ø 16 mmBrass1.5 mP = 70 kN

Find the axial strain ε in the brass bar, in microstrain (µε = 10⁻⁶).

P = 70 kNd = 16 mmL = 1.5 mE = 100 GPa
ε = µε
8.Axial stress & strainHard
Ø 30 mmAluminium2 mØ 12 mmSteel0.5 mP = 75 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the total elongation δ.

P = 75 kNsegment 1: Ø30 mm, 2 m, aluminium (E = 70 GPa)segment 2: Ø12 mm, 0.5 m, steel (E = 200 GPa)
δ = mm
9.Column bucklingMedium
PL = 1.5 m25 × 50 mmcross-section

A column of length L made of aluminium is fixed at the base and free at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 1.5 mE = 70 GPa (aluminium)b × h = 25 × 50 mm
Pcr = kN
10.Column bucklingHard
PL = 6 md = 60 mmcross-section

A column of length L made of steel is fixed at the base and pinned at the top. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 6 mE = 200 GPa (steel)d = 60 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 50 kN/mc = 280 N·s/mm = 10 kg

A 10 kg mass is supported by a spring with a stiffness of 50 kN/m and a viscous damper with a damping coefficient of 280 N·s/m. Find the damping ratio ζ.

m = 10 kgk = 50 kN/mc = 280 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 60k2​ = 20m = 5 kg

A 5 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 60 kN/m and the lower one k₂ = 20 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 5 kgk1 = 60 kN/mk2 = 20 kN/m
keq = kN/m

3Solutions

1.Gears & gear trains

Answer: Ft = 4053 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·1440/60 = 150.8 rad/s
T = P/ω = 11000/150.8 = 72.95 N·m

Pitch diameter

d = m·N = 2·18 = 36 mm

Tangential force

Ft = 2T/d = 2·72.95/0.036 = 4053 N

Answer

Ft = 4053 N
2.Gears & gear trains

Answer: P = 2.206 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.675 rad

Slack-side tension

eμθ = e0.6687 = 1.952, T₂ = 1500/1.952 = 768.5 N

Power

P = (1500 − 768.5)·3.016 = 2.206 kW

Answer

P = 2.206 kW
3.Torsion of shafts

Answer: G = 26.01 GPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar moment and angle

J = π·15⁴/32 = 4970 mm⁴
φ = 11.08·π/180 = 0.1934 rad

Shear modulus

T = 100 N·m = 100000 N·mm
G = TL/(Jφ) = 100000·250/(4970·0.1934) = 26011 MPa
G = 26.01 GPa

Answer

G = 26.01 GPa

Compare: steel ≈ 80 GPa, brass ≈ 39 GPa, aluminium ≈ 26 GPa.

4.Torsion of shafts

Answer: d = 43.28 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·1500/60 = 157.1 rad/s
T = P/ω = 100000/157.1 = 636.6 N·m

Diameter from the allowable stress

d = ∛(16T/(π·τallow)) = ∛(16·636620/(π·40)) = 43.28 mm

Answer

d = 43.28 mm

In practice you would round up to the next standard size.

5.Mohr’s circle & stress transformation

Answer: θp = 26.57 °

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCσ1​σ2​

Angle on the circle

Point x sits at an angle 2θp from the σ-axis on Mohr’s circle; the quadrant follows from the signs of σₓ − σᵧ and τₓᵧ.

2θp = atan2(2·40, 100 − 40) = 53.13°

Angle on the element

θp = 26.57°

Answer

θp = 26.57°

Positive angles are counter-clockwise.

6.Mohr’s circle & stress transformation

Answer: σ1 = 134.6 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Stresses at the surface

σ = 32M/(πd³) = 32·1500000/(π·50³) = 122.2 MPa
τ = 16T/(πd³) = 16·1000000/(π·50³) = 40.74 MPa
στxyCσ1​σ2​

Mohr’s circle

C = σ/2 = 61.12 MPa
R = √(61.12² + 40.74²) = 73.45 MPa
σ1 = C + R = 134.6 MPa
σ2 = C − R = −12.34 MPa

Answer

σ1 = 134.6 MPa
7.Axial stress & strain

Answer: ε = 3482 µε

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·16²/4 = 201.1 mm²
σ = P/A = 70·1000/201.1 = 348.2 MPa

Strain (Hooke’s law)

E for brass = 100 GPa = 100000 MPa.

ε = σ/E = 348.2/100000 = 0.003482 = 3482 µε

Answer

ε = 3482 µε
8.Axial stress & strain

Answer: δ = 4.689 mm

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·30²/4 = 706.9 mm², A2 = π·12²/4 = 113.1 mm²
σ1 = 106.1 MPa
σ2 = 663.1 MPa

Add the segment elongations

δ1 = σ1L1/E1 = 106.1·2000/70000 = 3.032 mm
δ2 = σ2L2/E2 = 663.1·500/200000 = 1.658 mm
δ = δ1 + δ2 = 4.689 mm

Answer

δ = 4.689 mm
9.Column buckling

Answer: Pcr = 4.998 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 50·25³/12 = 65104 mm⁴

Effective length

KL = 2·1500 = 3000 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·65104/3000² = 4998 N = 4.998 kN

Answer

Pcr = 4.998 kN
10.Column buckling

Answer: σcr = 25.18 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·60⁴/64 = 636173 mm⁴

Radius of gyration and slenderness

A = 2827 mm²
r = √(I/A) = √(636173/2827) = 15 mm
KL = 0.7·6000 = 4200 mm
KL/r = 4200/15 = 280

Critical stress

σcr = π²E/(KL/r)² = π²·200000/280² = 25.18 MPa

Answer

σcr = 25.18 MPa
11.Mechanical vibrations

Answer: ζ = 0.198

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(50000·10) = 1414 N·s/m

Damping ratio

ζ = c/cc = 280/1414 = 0.198

Answer

ζ = 0.198

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: keq = 15 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/60 + 1/20 → keq = 60·20/(60 + 20) = 15 kN/m

Answer

keq = 15 kN/m

ExamProblems · examproblems.com/courses/machine-design